F-219 (Rev 22AUG19) ET60S-D04-3-08-A04-L-V1-S EXTreme Ten60Power SOCKET TM Mates with: ET60T POWER OPTION (RIGHT) ET60S SIGNAL POSITIONS PER ROW ROWS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?ET60S -0 Insulator Material: Black LCP Terminal Material: Signal: Copper Alloy Power: Copper Alloy Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: Power: 60 A per blade (2 pins powered) Signal: 2.8 A per pin (6 pins powered) Operating Temp Range: -40 C to +105 C Voltage Rating: 280 VAC RoHS Compliant: Yes -00 = No Signal -AXX = AC Power Positions (-02, -03, -04, -05, -06 positions only) = No Signal -3 -DXX = DC Power Positions ( -02, -03, -04, -05, -06, -07, -08, -09, -10 positions only) -08 = 3 Rows = 3 Row only -5 -01, -02, -03, -04, -05, -06, -07, -08 = 5 Rows = 5 Row only -SXX* = Split Power -000 Note: -SXX* & -T* are Preliminary = No Power A PROCESSING (2.54) .100 (7.50) .295 B C (5.50) .217 A POWER POWER POSITIONS POSITIONS AC (LEFT) (RIGHT) POWER Lead-Free Solderable: Yes (18.00) .709 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality A + C + B + (33.98) 1.338 FILE NO. E111594 (2.60) .102 (4.81) .189 (3.00) .118 (5.17) .204 (0.64) .025 SQ ET60S-D03-3-08-A03-X-V1-S CREEPAGE AND CLEARANCE A (2.00) .079 -02 -02 -03 -03 -04 -04 -05 -05 -06 -06 (7.50) .295 (15.00) .591 (22.50) .886 (30.00) 1.181 (37.50) 1.476 -07 -07 N/A -08 -08 N/A -09 -09 N/A -10 -10 N/A C -VP Notes: Some lengths, styles and options are non-standard, non-returnable. EXTreme Ten60PowerTM is a trademark of Molex Incorporated and is dual sourced by Molex(R) -V1 3 ROWS E F (2.83) .111 (2.00) .079 (5.28) .208 (8.82) .347 ET60S-D04-5-03-A04-X-VP-S E (5.32) .209 (1.65) .065 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. 5 ROWS E F (2.83) (2.83) (2.50) (3.28) .111 .111 .098 .129 (2.60) N/A .102 A + C + D + (34.21) 1.347 (9.18) .361 (5.50) .217 (11.00) .433 (16.50) .650 (22.50) .886 (27.50) 1.083 (33.00) 1.299 (38.50) 1.516 (44.00) 1.732 (49.50) 1.949 D TAIL Selectively loading contacts achieves customer specific creepage and clearance requirements. Contact asp@samtec.com C DC POWER F (0.93) .037 (6.60) .260 ET60S-A04-5-03-D04-L-VP-S ET60S-D04-5-03-A04-S-R1-S ET60S-D04-3-08-A04-L-R1-S POWER OPTION (LEFT) ET60S SERIES PLATING -AXX = AC Power Positions (-02, -03, -04, -05, -06 positions only) -DXX = DC Power Positions (-02, -03, -04, -05, -06, -07, -08, -09, -10 positions only) -L TAIL GUIDE POST -VP (Required callout) -V1 = Side Guide Post = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Not available for 5 rows) = Vertical Press-fit -S = Vertical through-hole (Use with (1.60 mm) .062" thick card) (-0 and -3 Row only) = 30 " (0.76 m) Gold on contact, Matte Tin on tail -S -T* = Top Guide Post -R1 -SXX* = Right-angle through-hole (Use with (1.60 mm) .062" thick card) = Split Power -000 D A = No Power (2.00) .079 C Note: -SXX* & -T* are Preliminary A + D + C + (27.21) 1.071 (0.64) .025 SQ F A + D + C + (34.21) 1.347 SIGNAL POSITIONS PER ROW (3 Row) B SIGNAL POSITIONS PER ROW (5 Row) -01 N/A -02 (2.00) .079 (4.00) .157 (6.00) .236 (8.00) .315 (10.00) .394 (12.00) .472 (14.00) .551 -03 -08 -04 (17.78) .700 -05 -06 -07 -08 (3.33) .131 DIA D (4.94) .194 (5.50) .217 (5.50) .217 (5.27) .207 E ET60S-D04-5-03-A04-X-R1-S (7.50) .295 A (10.00) .394 A + B + C + (26.98) 1.062 (0.64) .025 SQ A + B + C + (33.98) 1.338 TAIL -R1 E F (2.84) .112 (2.50) .098 (5.00) .197 (5.60) .220 (5.50) .217 (7.50) .295 (3.00) .118 (4.81) .189 (5.17) .204 (5.50) .217 (5.50) .217 (3.00) .118 ET60S-D03-3-08-A03-X-R1-S Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM (4.48) .176 (14.48) .570 C (5.50) .217 B (2.54) .100 (25.22) .993 All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.