2013-10-11 PointLED Datasheet Version 1.3 LS P47F reverse mount With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application where space is a sensitive issue. Mit nur 2 mm Durchmesser gehort die PointLED zu den kleinsten LED auf dem Markt bei hohen Effizienzen. Aufgrund ihres runden und flachen Gehauses mit nur 0,775 mm Bauhohe ist sie ideal fur Applikationen mit begrenztem Raum. Features: Besondere Merkmale: * Package: white SMT package, colorless clear resin * Technology: InGaAlP Thinfilm * Viewing angle at 50 % IV: 120 (Lambertian Emitter) * Color: super red (633 nm) * Corrosion Robustness: Improved corrosion robustness * Gehausetyp: weies SMT Gehause, farbloser klarer Verguss * Technologie: InGaAlP Thinfilm * Abstrahlwinkel bei 50 % IV: 120 (Lambertscher Strahler) * Farbe: super rot (633 nm) * Korrosionsstabilitat: Verbesserte Korrosionsstabilitat Applications * * * * * Anwendungen Coupling into Light Guides Optical Indicator Backlighting Automotive Interior Lighting Dashboard Backlighting 2013-10-11 top mount * * * * * 1 Einkopplung in Lichtleiter Optischer Indikator Hinterleuchtung Automobilbeleuchtung innen Instrumentenbeleuchtung Version 1.3 LS P47F Ordering Information Bestellinformation Type: Mounting methode Luminous Intensity 1) page 20 Ordering Code Typ: Montierbarkeit Lichtstarke Bestellnummer 1) Seite 20 IF = 30 mA IV [mcd] LS P47F-U1AA-1-1 reverse mount 450 ... 1400 Q65110A4859 LS P47F-U1AA-1-1-F top mount 450 ... 1400 Q65110A7548 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LS P47F-U1AA-1-1-F means that only one group AA, U1, U2, V1, V2 will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. LS P47F-U1AA-1-1-F means that only one wavelength group 1 will be shippable. LS P47F-U1AA-1-1-F means that the device will be shipped within the specified limits as stated on page 5In order to ensure availability, single wavelength groups will not be orderable (see page 5). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. LS P47F-U1AA-1-1-F means that only one forward voltage group 3A,3B,4A,4B will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LS P47F-U1AA-1-1-F bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen AA, U1, U2, V1, V2 enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlangengruppe geliefert. Z. B. LS P47F-U1AA-1-1-F bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlangengruppen 1 enthalten ist (siehe Seite 5). LS P47F-U1AA-1-1-F bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LS P47F-U1AA-1-1-F bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen 3A,3B,4A,4B enthalten (siehe Seite 5). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2013-10-11 2 Version 1.3 LS P47F Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 100 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature Sperrschichttemperatur Tj 125 C Forward current Durchlassstrom (TS = 25 C) IF 50 mA Surge current Stostrom (t <= 10 s, D = 0.1) IFM 100 mA Reverse voltage 2) page 20 Sperrspannung 2) Seite 20 (TS = 25 C) VR 5 V 2 kV VESD ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 2) 2013-10-11 3 Version 1.3 LS P47F Characteristics (TS = 25 C; IF = 30 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlange d. emittierten Lichtes (typ.) peak 645 nm Dominant Wavelength 3) page 20 Dominantwellenlange 3) Seite 20 (min.) (typ.) (max.) dom dom dom 627 633 639 nm nm nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) 15 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 120 Forward voltage 4) page 20 Durchlassspannung 4) Seite 20 (min.) (typ.) (max.) VF VF VF 1.80 2.20 2.40 V V V Reverse current Sperrstrom (VR = 5 V) (typ.) (max.) IR IR 0.2 10 A A Temperature coefficient of peak Temperaturkoeffizient von peak (-10C T 100C) (typ.) TCpeak 0.15 nm/K Temperature coefficient of dom Temperaturkoeffizient von dom (-10C T 100C) (typ.) TCdom 0.05 nm/K Temperature coefficient of VF Temperaturkoeffizient von VF (-10C T 100C) (typ.) TCV -2.50 mV/K Real thermal resistance junction / ambient (max.) Rth JA real 420 K/W (max.) Rth JS real 200 K/W 5) page 20 , 6) page 20 Realer Warmewiderstand Sperrschicht / Umgebung 5) Seite 20 , 6) Seite 20 Real thermal resistance junction / solder point 6) page 20 Realer Warmewiderstand Sperrschicht / Lotpad 6) Seite 20 Note: Individual forward voltage groups see next page Anm.: Durchlassspannungsgruppen siehe nachste Seite 2013-10-11 4 Version 1.3 LS P47F Brightness Groups Helligkeitsgruppen Group Luminous Intensity Gruppe Lichtstarke 1) page 20 Luminous Intensity Luminous Flux 7) page 20 Lichtstarke 1) Seite 20 Lichtstrom 7) Seite 20 1) page 20 1) Seite 20 (min.) Iv [mcd] (max.) Iv [mcd] (typ.) V [mlm] U1 450 560 1520 U2 560 710 1910 V1 710 900 2420 V2 900 1120 3030 AA 1120 1400 3780 Note: The standard shipping format for serial types includes a grouping of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar. Forward Voltage Groups 4) page 20 Durchlassspannungsgruppen 4) Seite 20 Group Gruppe (min.) VF [V] (max.) VF [V] 3A 1.80 1.95 3B 1.95 2.10 4A 2.10 2.25 4B 2.25 2.40 Dominant Wavelength Groups 3) page 20 Dominant Wellenlangengruppen 3) Seite 20 Group super red Gruppe (min.) dom [nm] (max.) dom [nm] 1 627 639 Note: No packing unit / tape ever contains more than one color group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Farbe enthalten. 2013-10-11 5 Version 1.3 LS P47F Group Name on Label Gruppenbezeichnung auf Etikett Example: AA-1-3A Beispiel: AA-1-3A Brightness Helligkeit Wavelength Wellenlange Forward Voltage Durchlassspannung AA 1 3A Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2013-10-11 6 Version 1.3 LS P47F Relative Spectral Emission - V() = Standard eye response curve 7) page 20 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 7) Seite 20 Irel = f (); T S = 25 C; IF = 30 mA OHL02731 100 rel % 80 V 60 yellow amber red super-red 40 20 0 400 450 500 550 600 650 nm 700 Radiation Characteristics 7) page 20 Abstrahlcharakteristik 7) Seite 20 Irel = f (); T S = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2013-10-11 0.8 0.6 0.4 0 20 7 40 60 80 100 120 Version 1.3 LS P47F Forward Current 7) page 20 Durchlassstrom 7) Seite 20 Relative Luminous Intensity 7) page 20 , 8) page 20 Relative Lichtstarke 7) Seite 20 , 8) Seite 20 IF = f (VF); TS = 25 C IV/IV(30 mA) = f(IF); TS = 25 C OHL03954 2 IF 10 mA OHL02812 10 1 IV IV (30 mA) 5 red super-red orange amber yellow 10 0 5 10 1 5 10 -1 5 10 0 1.5 1.7 1.9 2.1 10 -2 0 10 2.3 V 2.5 2013-10-11 5 10 1 mA 10 2 IF VF 8 Version 1.3 LS P47F Relative Forward Voltage 7) page 20 Relative Vorwartsspannung 7) Seite 20 Relative Luminous Intensity 7) page 20 Relative Lichtstarke 7) Seite 20 VF = VF - VF(25C) = f(Tj); IF = 30 mA 0.25 V IV/IV(25)C = f(Tj); IF = 30 mA OHL02667 OHL02666 2.5 IV VF IV (25 C) 2.0 0.15 yellow 0.1 1.5 0.05 0 1.0 -0.05 -0.1 super red amber red orange 0.5 -0.15 -0.2 -60 -40 -20 0 0 -60 -40 -20 0 20 40 60 C 100 2013-10-11 20 40 60 C 100 Tj Tj 9 Version 1.3 LS P47F Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF OHL02708 60 mA 50 TS 40 TA 30 20 10 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 C 100 T Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 C D: Duty cycle, TS = 85 C OHL02706 0.12 IF A D= 0.10 0.08 0.5 D= 0.10 0.005 0.01 0.02 0.05 0.1 0.2 OHL02707 0.12 IF A 0.08 0.5 0.06 0.06 1 1 0.04 0.04 0.02 t D = TP 0.02 tP t IF D = TP T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tP IF T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2013-10-11 0.005 0.01 0.02 0.05 0.1 0.2 tp 10 Version 1.3 LS P47F Package Outline 9) page 20 Mazeichnung 9) Seite 20 Approximate Weight: 6 mg Gewicht: 6 mg Corrosion robustness: Test conditions: 40 C / 90 % rh / 15 ppm H2S / 336 h = Stricter than IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 days] = Regarding relevant gas (H2S) stricter than EN 60068-2-60 (method 4) [25 C / 75 % rh / 200 ppb SO2, 200 ppb NO2,10 ppb Cl2 / 21 days] Korrosionsfestigkeit: Test Kondition: 40C / 90 % rh / 15 ppm H2S / 336 h = Besser als IEC 60068-2-43 (H2S) [25C / 75 % rh / 10 ppm H2S / 21 Tage] = Bezogen auf das Gas (H2S) besser als EN 60068-2-60 (method 4) [25C / 75 % rh / 200ppb SO2, 200ppb NO2,10ppb Cl2 / 21 Tage] 2013-10-11 11 Version 1.3 LS P47F Recommended Solder Pad 9) page 20 Empfohlenes Lotpaddesign 9) Seite 20 reflow soldering Reflow-Loten Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation 3.6 (0.142) 0.025 (0.001) 0.7 (0.028) 2.6 (0.102) (o2.1 (0.083) +0.1 (0.004) ) (0.5 (0.020)) Bauteil positioniert, Ruckseite Component location on pad, backside Hole in PCB Lotstoplack Solder resist OHAY1307 reflow soldering Reflow-Loten 0.7 (0.028) 2.6 (0.102) 0.8 (0.031) 0.2 (0.008) Recommended Solder Pad 9) page 20 Empfohlenes Lotpaddesign 9) Seite 20 o2.3 (0.091) Lotstoplack Solder resist Kein Lotstoplack; kein Kupfer No solder resist; no copper pad Note: 2013-10-11 OHAY2629 The lower solder pad layout represents the recommended solder pad for top mounting. 12 Version 1.3 LS P47F Anm.: 2013-10-11 Das untere Lotpaddesign zeigt das empfohlene Lotpad fur die Montage von oben. 13 Version 1.3 LS P47F Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2013-10-11 C 14 s Version 1.3 LS P47F Method of Taping 9) page 20 Gurtung 9) Seite 20 5 max. 3.75 (0.148) 0.05 (0.002) 0.3 (0.012) max. 8.1 (0.319) 0.1 (0.004) 3.5 (0.138) 0.05 (0.002) 2 (0.079) 0.05 (0.002) 1.75 (0.069) 0.05 (0.002) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side 2.8 (0.110) 0.05 (0.002) reverse mount / durch ein Loch in der Platine emittierend 0.8 (0.031) 0.05 (0.002) 0.45 (0.018) 0.05 (0.002) 1.5 (0.059) 0.05 (0.002) 0.95 (0.037) 0.05 (0.002) OHAY2512 Method of Taping 9) page 20 Gurtung 9) Seite 20 0.8 (0.031) 0.05 (0.002) 5 max. 3.7 (0.146) 0.05 (0.002) (1.4 (0.055)) 0.3 (0.012) max. 8.1 (0.319) 0.1 (0.004) 2 (0.079) 0.05 (0.002) 3.5 (0.138) 0.05 (0.002) 4 (0.157) 2.7 (0.106) 0.05 (0.002) 1.5 (0.059) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side +0.1 (0.004) 1.75 (0.069) 0.05 (0.002) top mount / nach oben emittierend 0.95 (0.037) 0.05 (0.002) 2.25 (0.089) 0.05 (0.002) OHAY2511 2013-10-11 15 Version 1.3 LS P47F Tape and Reel Gurtverpackung 8 mm tape with 3000 pcs. on 180 mm reel, 12000 pcs. on 330 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dim ensions in m m ( inch) W P0 P1 P2 D0 E F 8 +0.3/-0.1 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) or 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 3.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dim ensions in m m ( inch) A W Nmin W1 W2max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) A W Nmin W1 W2max 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) Reel dim ensions in m m ( inch) 2013-10-11 16 Version 1.3 LS P47F Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) EX AM PL E OSRAM Opto po BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors tors ors r RoHS Compliant (6P) BATCH NO: NO:: 1234567 1234567890 234 4 7890 8 890 ML Temp ST X XXX C X (1T) LOT NO: 1234567890 (9D) ((9D 9D D) D/C: D) D/C D : 123 D/ 1234 23 234 34 RXX Pack: R RX XX DEMY Y XXX XXX X_X123_1234.1234 X_X123_1 12 _123 123 12 234.1234 X (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X XX-XX XX XXXX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE see labe ). (RH idity C < 40 . RH hum 0% e tive C/6 red kag rela 30 _ pac < infra of 90% to ak < ns ed (pe or ditio and ject C, sing 5 con N s IVE S Otain TOR SIT UC TI SEN ND U Econ As bag UR ICO CThiIST SEM 1. sub ces be pro ory Barcode label l k, code blan If bar C e). cod date r rs rs rs Hou rs Hou 72 Hou 48 Hou 24 6 time time r time 23 will at l with fact r entC). MO Floo . time TO at at r Floo l ths that tica d ival ure OP Floo 4 if: rea w Floo labe mon iden 5 ced equ el ices g, n e 5a is el belo or 24 pro Lev 6 dev : ntin el whe cod e , w, e Lev el see e bag Lev l date mou bak ned stur e Lev reflo bar re> 10% led stur e time sea for ope e Moi r see stur k, is . Moi sea is has k, stur befo d 033 Moi in Floo RH blan Moi or-p blan in bag Car ing, r TD(if life r . If with r lf 10%bak J-S thisvapp. Yea _ eks rs < r w, met cato 1 Yea tem d, She nted at uire not > y 1 WeHou DEC Afte Indi 4 uire reflo is bod Mou red req /JE time 168 req : 2b r a) Sto ices idity time is IPC r or time b) ned Floo r Hum ing ce time Dev 2a r Floo a) ope 3. b) bakren Floo 1 l date Floo If 2 refe time el 4. 2a el sea Lev 3 el and e Lev el Bag e e Lev stur e Lev Dat stur e Moi stur Moi stur Moi Moi O S R A M 2. Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2013-10-11 17 Version 1.3 LS P47F Transportation Packing and Materials Kartonverpackung und Materialien 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu P- 44 (9D ) 4 20 23 3G (6P ) LO T 00 D/C : 01 998 NO : 12 O 021 H1 210 BA TC H Se SR mi AM co nd O uc pt to o rs NO : ). 5 14 2 110 0 (Q) QT Y: see labe N (1T ) O NO : TI PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum e 60% tive d C/ kag rela are 30 E S s _ infr pac < OR of 90% to ak tainITIV urs CT < or e). ted (pe urs ons Ho con NS g urs SE DU Ho and jec C, diti cod 72 sin Ho urs 5 e bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim C h e ThISTSE pro < tory tim . or t wit 23 tim e at t will or fac . MO Flo al len C) s tim TO at or at Flo d or ure iva el nth s tha OP ntic Flo 4 if: rea , Flo lab ow mo ice equ ced ide 5 el e 5a is ingen el or bel 24 pro 6 Lev e dev, : el e cod , unt wh Lev el re ow see bag Lev l dat mo re bak e bar ned Lev refl istu 10% re tim for sea istu ore> re Mo see 3 istu is or . sea is Mo bef nk, istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag ingCa bla hin TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo DE unt Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic ned b) or Hu Flo tim ing ce or e De 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ PP: OU GR (G) : 01 O SR AM rs D/C to ) uc (9D 00 nd 21 00 21 99 8 : 4 20 NO 23 QT (Q) O SR m A ico M H H1 TC BA 3G ) : 12 (6P (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO 5 Se Y: O pt o 44 Mu MY ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: ope se Muster led DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch): Width / Breite Length / Lange Height / Hohe 200 5 (7.874 0.196) 352 5 (13.858 0.196) 195 5 (7.677 0.1968) 352 5 (13.858 0.196) 30 5 (1.181 0.196) 33 5 (1.299 0.196) Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class ---------------- t.b.d. ----------------. Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - ---------------- t.b.d. ----------------. Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. 2013-10-11 18 Version 1.3 LS P47F Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2013-10-11 19 Version 1.3 LS P47F Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of 8 % and an expanded uncertainty of 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von 8 % und einer erweiterten Messunsicherheit von 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Reverse Voltage: Driving the LED in reverse direction is suitable for short term application. 2) Sperrspannung: Die LED kann Sperrrichtung betrieben werden. 3) Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal reproducibility of 0.5 nm and an expanded uncertainty of 1 nm (acc. to GUM with a coverage factor of k = 3). 3) Wellenlange: Die Wellenlage wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von 0,5 nm und einer erweiterten Messunsicherheit von 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). 4) Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V and an expandeduncertainty of 0.1 V (acc. to GUM with a coveragefactor of k=3). 4) Durchlassspannung: Durchlassspannungen werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt und einer erweiterten Messunsicherheit von 0,1 V gemessen (gema GUM mit Erweiterungsfaktork=3). 5) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size >= 5mm per pad) 5) Warmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe >= 5mm je Pad) 6) Thermal Resistance: Rth max is based on statistic values (6). 6) Warmewiderstand: Rth statistischen Werten (6). 7) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 8) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 9) Tolerance of Measure: Dimensions are specified as follows: mm (inch). 9) Matoleranz: Mae angegeben: mm (inch). 2013-10-11 20 max werden kurzzeitig basiert wie in auf folgt Version 1.3 LS P47F Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2013-10-11 21