QPQ1288 2345.0 MHz BAW Filter (R) General Description The QPQ1288 is a high performance Bulk Acoustic Wave (BAW) filter designed to meet the strict LTE rejection requirements for use in B40, Sub-Band 2300-2390 MHz QPQ1288 is specifically designed to meet the high performance expectations of insertion loss and rejection for LTE TDD systems under all operating conditions. The QPQ1288 uses common module packaging techniques to achieve the industry standard 2.0 x 1.6 x 0.73 mm footprint. Functional Block Diagram 3 Pin 2 x 1.6 mm leadless SMT Package Product Features Highly selective BAW filter achieving low insertion loss over full bandwidth and operating conditions Performance -20 to +90 C Excellent Wi-Fi rejection Single-ended operation No Matching required for operation at 50 High Power Handling Compatible for Small Cells Small Size RoHS compliant (2002/95/EC), Pb-free P b RF In Applications 1 For Band 40 TD-LTE applications 2300 - 2390 MHz Sub-Band For Small Cells Base Stations 2 3 RF Out Top View TOPxRAY PINS VIEW Ordering Information Pin Configuration Pin No. Label 1 RF in 2 RF out 3 Ground Part No. TQQ6421 01 UNIT, 01.60mm X 1:1 Data Sheet, December 7, 2016 | Subject to change without notice A3H TOPxRAY TOPxRAY PINS QPQ1288TR7 02.00mm, 7 LAYER, Description 2,500 pieces on a 7" reel (standard) 0.40mm MOLD CAP, QPQ1288SR 100 pieces on a 7" reel QPQ1288SB 5 loose pieces QPQ1288EVB Evaluation Board - 1 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Absolute Maximum Ratings Life Test Parameter Rating Storage Temperature (1) -40 to +125C Operating Temperature (2) -40 to +105C (1) Operation of this device outside the parameter ranges given may cause permanent damage. (2) Device will function but it is not guaranteed to meet electrical specifications. Conditions Rating +29 dBm, LTE SIGNAL PAR = 8dB, 5MHz, 16 QAM + 90 C >10 yrs. Power rating is valid when Power is injected into Pin 1 or Pin 2 Electrical Specifications (1) Test conditions unless otherwise specified. Temperature Range: -20 to +90C Parameter Min Typ Max Units - 2.8 2.1 2.1 2.8 2:1 3.5 2.8 2.8 3.5 2.4:1 dB dB dB dB - 2300.0-2390.0 MHz 2300.0-2390.0 MHz 2305.0-2385.0 MHz 7.7 - 9.0 1.2 0.7 2.0 1.6 dB dB dB 2300.0-2390.0 MHz - 15 30 ns p-p 2300.0-2390.0 MHz - 7 25 p-p 2401 - 2423 MHz (Channel 1) 2406 - 2428 MHz (Channel 2) 2411 - 2433 MHz (Channel 3) 2416 - 2463 MHz (Channel 4 - 9) 2446 - 2468 MHz (Channel 10) 2451 - 2473 MHz (Channel 11) 2456 - 2478 MHz (Channel 12) 2461 - 2483 MHz (Channel 13) 2473 - 2495 MHz (Channel 14) 10 - 766 MHz 791 - 960 MHz 1150 - 1195 MHz 1574.4-1576.4 MHz 1710 - 2170 MHz 2170 - 2275 MHz 2500 - 2690 MHz 3400 - 3500 MHz 4600 - 4800 MHz 5150 - 5850 MHz 6000 - 8000 MHz 11 22 52 50 46 45 44 42 41 50 47 35 37 35 10 36 35 32 20 13 37 46 62 56 48 47 46 44 43 55 49 44 40 38 37 39 39 36 23 17 - 2nd Harmonic(8) Pin = +29 dBm (2300-2390 MHz) 55 80 Source/Load Impedance (9) Single-ended - 50 Average Insertion Loss(2) Input / Output VSWR Input / Output Return Loss Amplitude Variation(3) (over any 10 MHz window) Group Delay Ripple(4) (over any 10 MHz window) Phase Ripple(4) (over any 10 MHz window) Attenuation in WIFI Band(5) (Average per Channel using 802.11b Spectrum mask) Attenuation(7) Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. Conditions 2300 - 2310 2310 - 2370 (Over any 10 MHz) 2370 - 2380 2380 - 2390 2300.0-2390.0 MHz dB dB dBc - All specifications are based on the QORVO schematic for the main reference design shown on page 5. Average Insertion Loss is calculated by averaging |S21| in dB for each measured point within defined frequency range Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 10 MHz channels. This is defined as the worst difference between a peak and adjacent valley within defined frequency points WIFI attenuation is calculated by averaging |S21| in dB referenced to ZERO dB for each measured point within defined frequency range Typical values are an average of 20 pieces measured at a temperature of 25 C. Attenuation is referenced to ZER0 dB Non-Linear Response is the same for Pin 2 Input This is the optimum impedance in order to achieve the performance shown Data Sheet, December 7, 2016 | Subject to change without notice - 2 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Performance Plots Test conditions unless otherwise noted: Temp.=+25C Passband Response -1 25 -2 12.5 -3 d B -4 -12.5 -5 -6 2280 -25 2313.75 2347.5 2381.25 2415 Frequency (MHz) Attenuation 4600-4800 0 Attenuation in WIFI band 0 -10 -20 -20 -40 d B d B -30 -40 -60 -80 -50 -60 4500 4600 4700 4800 4900 -100 2400 2425 Frequency (MHz) 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 2500 0 0 -0.5 2475 Output Smith Chart Input Smith Chart -1 2450 Frequency (MHz) 0 0.5 -1 1 -0.5 0 -0.2 -0.2 -0.4 -0.4 -0.6 -0.6 -0.8 -0.8 -1 -1 Data Sheet, December 7, 2016 | Subject to change without notice - 3 of 9 - 0.5 1 www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Performance Plots - (continued) Test conditions unless otherwise noted: Temp.=+25C Output VSWR Input VSWR 3 25 3 12.5 n 12.5 n L i n 0 2.5 -12.5 2 M a g 2.5 -12.5 -25 2255 2 15 1.5 1 2255 d 7.5 1.5 -7.5 g g 2300 2345 2390 2435 1 2255 2300 2345 2390 2435 -15 2255 Frequency (MHz) Frequency (MHz) Data Sheet, December 7, 2016 | Subject to change without notice d 0 - 4 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Evaluation Board 3 2 1 50W 50W Bill of Material Reference Des. Description SMA Value N/A Manuf. Part Number SMA connector Radiall 9602-1111-018 PCB N/A 3-layer Multiple 1132983 PCB Mounting Pattern Standard T/R size = 2500 units/ 7" reel. All dimensions are in millimeters Data Sheet, December 7, 2016 | Subject to change without notice - 5 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Package Marking and Dimensions Body: Al2O3 ceramic Lid: Kovar, Au over Ni plating Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating Trace code Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M-1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. Data Sheet, December 7, 2016 | Subject to change without notice - 6 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Tape and Reel Information - Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2500 pieces on a 7" reel. Feature Symbol Size (in) Size (mm) Length A0 0.077 1.95 Width B0 0.093 2.35 Depth K0 0.045 1.15 Pitch P1 0.157 4.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.138 3.50 Cover Tape Width C 0.213 5.40 Carrier Tape Width W 0.315 8.00 Cavity Measure Data Sheet, December 7, 2016 | Subject to change without notice - 7 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Tape and Reel Information - Reel Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2500 pieces on a 7" reel. Feature Flange Hub Measure Symbol Size (in) Size (mm) Diameter A 6.969 177.0 Thickness W2 0.559 14.2 Space Between Flange W1 0.346 8.8 Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0 Data Sheet, December 7, 2016 | Subject to change without notice - 8 of 9 - www.qorvo.com QPQ1288 2345.0 MHz BAW Filter (R) Handling Precautions Parameter Rating Standard ESD-Human Body Model (HBM) ESD-Charged Device Model (CDM) MSL-Moisture Sensitivity Level Class 3B Class C3 Level 3 ESDA/JEDEC JS-001-2012 ESDA/JEDEC JS-002-2014 IPC/JEDEC J-STD-020 Caution! ESD-Sensitive Device Solderability Compatible with both lead-free (260C max. reflow temp.) and tin/lead (245C max. reflow temp.) soldering processes. Solder profiles available upon request. Contact plating: Au over Ni RoHS Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free Qorvo Green Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Tel: 1-844-890-8163 Web: www.qorvo.com Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2016 (c) Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Data Sheet, December 7, 2016 | Subject to change without notice Powered by TCPDF (www.tcpdf.org) - 9 of 9 - www.qorvo.com