SG PARAMETER SYMBOL TEMP. POWER 1 1 1 1 1 1 1 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 40V 40V 10V 45V 40V 40V 40V 3 3 3 3 3 3 3 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS -55C -55C -55C -55C -55C -55C -55C 2 2 2 2 2 2 2 Quiescent current Input offset voltage Input offset voltage Input offset voltage Input bias current, +IN Input bias current, -IN Input offset current IQ VOS VOS VOS +IB -IB IOS 4 4 4 4 4 4 4 4 Output voltage, IO = 5A Output voltage, IO = 80mA Output voltage, IO = 2A Current limits Stability/noise Slew rate Open loop gain Common mode rejection 6 6 6 6 6 6 6 5 5 5 5 5 5 5 MAX UNITS VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 6 12 7 30 30 30 mA mV mV mV nA nA nA 40V 40V 10V 45V 40V 40V 40V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 75 11.2 17.2 12.2 115 115 115 mA mV mV mV nA nA nA 125C 125C 125C 125C 125C 125C 125C 40V 40V 10V 45V 40V 40V 40V VIN = 0, AV = 100, RCL = .1 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 30 12.5 18.5 13.5 70 70 70 mA mV mV mV nA nA nA VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 18V 45V 30V 17V 40V 40V 40V 15V RL = 2.07 RL = 500 RL = 12 RL = 12, RCL = 1 RL = 100, AV = 1, CL = .33nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V Output voltage, IO = 5A Output voltage, IO = 80mA Output voltage, IO = 2A Stability/noise Slew rate Open loop gain Common mode rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 18V 45V 30V 40V 40V 40V 15V RL = 2.07 RL = 500 RL = 12 RL = 100, AV = 1, CL = .33nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V Output voltage, IO = 3A Output voltage, IO = 80mA Output voltage, IO = 2A Stability/noise Slew rate Open loop gain Common mode rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 14.3V 45V 30V 40V 40V 40V 15V RL = 2.07 RL = 500 RL = 12 RL = 100, AV = 1, CL = .33nF RL = 500 RL = 500, F = 10Hz RL = 500, F = DC, VCM = 9V MIN 10 40 24 .6 2 96 74 .89 1 10 10 40 24 2 96 74 1 10 6.3 40 24 2 96 74 1 10 V V V A mV V/s dB dB V V V mV V/s db dB V V V mV V/s dB dB BURN IN CIRCUIT TEST CONDITIONS * These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. This data sheet has been carefullyCORPORATION checked and is believed to be reliable, however, no responsibility is assumed for possible*inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY * TELEPHONE (520) 690-8600 * FAX (520) 888-3329 ORDERS (520) 690-8601 * EMAILare prodlit@apexmicrotech.com PA10MU REV L JULY 2002 (c) 2002 Apex Microtechnology Corp. 1