High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 30.00 [1.181] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 0.04 [.265 .002] 0.20 Typ. [.008] 7.14 Ref. [.281] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] A 0.08 29.24 +- 0.03 + .003 [1.151 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] TOL D 0.94 [.037] A Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 0.30 Typ. [.012] Pad MICTOR SB Interconnection System 1.45 [.057] 6.35 [.250] 5.28 [.208] Position No. 2 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658061-1 -- 1658030-1 -- 1658061-2 -- 1658030-2 -- 1658061-3 -- 1658030-3 -- 1658061-4 -- 1658030-4 -- 1658061-5 -- 1658030-5 -- Note: All part numbers are RoHS compliant. 65 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the Micro-Strip Interconnection System (1.27 x 2.54 [.050 x .100] Centerline) Product Facts Designed for high speed applications Provides controlled impedance Low inductance High density Superior electrical performance down to 100 picosecond rise times 40 high speed signal lines per inch Daughtercard-tomotherboard stacking connectors available in sizes of 40 to 240 positions Custom stacking heights available: between 10.92 [.430] and 18.75 [.738] or 31.12 [1.225] and 38.94 [1.533] Cable-to-board system available in sizes of 40 to 120 positions Vertical and right-angle board mount receptacles for cable connectors Connector housings are polarized Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Tyco Electronics Micro-Strip connectors are a high density, controlled impedance connector family compatible with the requirements of high density and high speed data transmission technologies. R Certified by Canadian Standards Association, File No. LR 7189 Micro-Strip Interconnection System R Each signal line within the mated connector is located at a specific distance from an integral, separable bus bar serving as a ground plane in a micro-strip configuration. The selection of housing dielectric, spacing from signal contact-to-ground plane and conductor geometry provide a specific charac- teristic impedance plus very low inductance and capacitance. Discontinuities resulting from connector structure and solder interfaces are dimensionally small and therefore appear transparent to high speed signals. Both vertical and rightangle board-to-board and cable-to-board connector versions share a nominal impedance of 50 ohms (single ended) or 100 ohms (differential pair). Each one inch length of connector houses two electrically isolated high current contacts. When soldered to the PC board ground plane, that ground plane is extended through the mated connector. Resistance is minimized by a large contact area and short electrical length, providing signal return paths with negligible ground loop voltages. Since signal return is via the bus bars, signal-ground-signal alternation, common to high speed applications, becomes unnecessary. All contacts can be dedicated to signal transmission, effectively doubling connector density. 66 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the Micro-Strip Interconnection System (1.27 x 2.54 [.050 x .100] Centerline) (Continued) Performance Characteristics Connector Impedance -- 50 ohms 10% at 1 ns Configuration -- 2.54 [.100] signal row-to-signal row, 1.27 [.050] signal-to-ground, 1.27 [.050] signal-to-signal Vertical Board-to-Board Stacking Applications Vertical Plug (Pages 68 and 70) Vertical Receptacle (See page 73) 10.92 [.430] Mated 31.12 [1.225] Stacking Height Extended Vertical Receptacle (Above) Vertical Plugs (See pages 68-70) Vertical Receptacle (See page 73) Vertical Plug (Pages 71 and 72) 18.75 [.738] Mated Vertical Plugs (See pages 71 and 72) 38.94 [1.533] Stacking Height Extended Vertical Receptacle (Above) Right-Angle Board-to-Board Application* (Small Paddlecard Applications) Vertical Plugs (See pages 68-70) Right-Angle Receptacles (See pages 74 and 75) 9.27 [.365] * Not recommended for use as a daughtercard/backplane interconnector. Micro-Strip Interconnection System Vertical and Right-Angle Cable-to-Board Applications (Ref. Tyco Electronics Catalog 65069, Micro-Strip Cable Assemblies) 67 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with Guides (Board-to-Board) 10.92 [.430] Stacking Height B Position No. 1 Indicator Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Bus Bar -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Signal Pin -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 7.24 [.285] Position No. 2 Indicator C A 4.83 [.190] 8.64 [.340] Related Product Data Performance Characteristics -- page 67 Mating Receptacles -- pages 73, 74 and 76 Technical Documents -- page 81 Solder Tail (see chart) Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 2 +0.08 0.71 -0.15 [ Position No. 4 ] .028+.003 -.006 Dia. Typ. Recommended PC Board Layout No. of Positions 40 60 Micro-Strip Interconnection System 80 100 120 140 160 180 200 A B 30.84 1.214 43.54 1.714 56.24 2.214 68.94 2.714 81.64 3.214 94.34 3.714 107.04 4.214 119.74 4.714 132.44 5.214 29.08 1.145 41.78 1.645 54.48 2.145 67.18 2.645 79.88 3.145 92.58 3.645 105.28 4.145 117.98 4.645 130.68 5.145 Dimensions C 26.62 1.048 39.32 1.548 52.02 2.048 64.72 2.548 77.42 3.048 90.12 3.548 102.82 4.048 115.52 4.548 128.22 5.048 D E 19 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 113.03 4.450 125.73 4.950 29 39 49 59 69 79 89 99 Part Numbers 2.41 [.095] 3.18 [.125] Solder Tail Solder Tail 536280-1 536272-1 536280-2 536272-2 536280-3 536272-3 536280-4 536272-4 536280-5 536272-5 536280-6 536272-6 536280-7 536272-7 536280-8 536272-8 536280-9 536272-9 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 68 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with Guides (Board-to-Board) (Continued) 10.92 [.430] Stacking Height Position No. 1 Indicator A B D Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Bus Bar -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Signal Pin -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 7.24 [.285] E C Position No. 2 Indicator 3.35 [.132] 4.47 [.176] Dia (2 Plc.) 4.83 [.190] 8.64 [.340] Related Product Data Performance Characteristics -- page 67 Mating Receptacles -- page 75 Technical Documents -- page 81 Solder Tail (see chart) Position No. 3 B 8.89 [.350] 8.89 [.350] F spaces at 1.27 [.050] = G Position No. 1 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] +0.08 0.71 -0.15 3.18 [.125] Dia. (2 Plc.) Note: Guide Pins must be purchased separately; order Part Number 536304-2. [ Position No. 2 Position No. 4 ] .028+.003 -.006 Recommended PC Board Layout No. of Positions 140 160 B C 114.30 4.500 127.00 5.000 152.40 6.000 105.41 4.150 118.11 4.650 143.51 5.560 94.34 3.714 107.04 4.214 132.44 5.214 92.58 3.645 105.28 4.145 130.68 5.145 E 90.12 3.548 102.82 4.048 128.22 5.048 F 69 79 99 G 87.63 3.450 100.33 3.950 125.73 4.950 Part Number 3.18 [.125] Solder Tail 536303-1 536303-2 Micro-Strip Interconnection System 200 A Dimensions D 536303-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 69 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with ACTION PIN Contacts (Board-to-Board) 10.92 [.430] Stacking Height B Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Bus Bar -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Signal Pin -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel Position No. 1 Indicator 7.24 [.285] C Position No. 2 Indicator A 4.83 [.190] 8.64 [.340] Related Product Data Performance Characteristics -- page 67 Mating Receptacles -- pages 73, 74 and 76 ACTION PIN Contacts -- pages 78 and 79 Application Tooling -- pages 80 Technical Documents -- page 81 ACTION PIN Tail (see chart) Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 2 0.610.05 [.024.002] Dia. Typ. After Plating Position No. 4 Recommended PC Board Layout (Connector Side of Board Shown) No. of Positions 40 Micro-Strip Interconnection System 80 100 120 140 160 180 A B 30.84 1.214 56.24 2.214 68.94 2.714 81.64 3.214 94.34 3.714 107.04 4.214 119.74 4.714 29.08 1.145 54.48 2.145 67.18 2.645 79.88 3.145 92.58 3.645 105.28 4.145 117.98 4.645 Dimensions C 26.62 1.048 52.02 2.048 64.72 2.548 77.42 3.048 90.12 3.548 102.82 4.048 115.52 4.548 D 19 39 49 59 69 79 89 E 24.13 .950 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 113.03 4.450 Part Numbers 3.68 [.145] ACTION PIN Tail 536274-1 536274-3 536274-4 536274-5 536274-6 536274-7 536274-8 Note: Refer to page 78 for information on ACTION PIN. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 70 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs (Board-to-Board) 18.75 [.738] Stacking Height Position No. 1 Indicator B Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Bus Bar -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Signal Pin -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 7.24 [.285] 4.78 [.188] 2.54 [.100] Position No. 2 Indicator C A 4.83 [.190] 16.46 [.648] Related Product Data Performance Characteristics -- page 67 Mating Receptacles -- pages 73, 74 and 76 Technical Documents -- page 81 Solder Tail (see chart) Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 2 Position No. 4 0.710.08 [.028.003] Dia. Typ. Recommended PC Board Layout (Component Side of Board) No. of Positions 40 60 100 120 140 160 180 200 B 30.84 1.214 43.54 1.714 56.24 2.214 68.94 2.714 81.64 3.214 94.34 3.714 107.04 4.214 119.74 4.714 132.44 5.214 29.21 1.150 41.91 1.650 54.61 2.150 67.31 2.650 80.01 3.150 92.71 3.650 105.41 4.150 118.11 4.650 130.81 5.150 26.62 1.048 39.32 1.548 52.02 2.048 64.72 2.548 77.42 3.048 90.12 3.548 102.82 4.048 115.52 4.548 128.22 5.048 Part Numbers 3.18 [.125] Solder Tail 4.70 [.185] Solder Tail D E 2.41 [.095] Solder Tail 19 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 113.03 4.450 125.73 4.950 149009-1 149011-1 149012-1 149009-2 149011-2 149012-2 149009-3 149011-3 149012-3 149009-4 149011-4 -- 149009-5 149011-5 -- 149009-6 149011-6 -- 149009-7 149011-7 -- 149009-8 149011-8 -- 149009-9 149011-9 -- 29 39 49 59 69 79 89 99 Micro-Strip Interconnection System 80 A Dimensions C Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 71 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with ACTION PIN Contacts (Board-to-Board) 18.75 [.738] Stacking Height Position No. 1 Indicator B Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Bus Bar -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Signal Pin -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 2.54 [.100] 7.24 [.285] Position No. 2 Indicator C A 4.83 [.190] 16.46 [.648] Related Product Data Performance Characteristics -- page 67 Mating Receptacles -- pages 73, 74 and 76 ACTION PIN Contacts -- pages 78 and 79 Application Tooling -- pages 80 Technical Documents -- page 81 ACTION PIN Tail (see chart) Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 2 Position No. 4 0.610.05 Dia. Typ. [.024.002] After Plating Recommended PC Board Layout (Connector Side of Board Shown) Micro-Strip Interconnection System No. of Positions 40 60 100 140 A B 30.84 1.214 43.54 1.714 68.94 2.714 94.34 3.714 29.21 1.150 41.91 1.650 67.31 2.650 92.71 3.650 Dimensions C 26.62 1.048 39.32 1.548 64.72 2.548 90.12 3.548 D E 19 24.13 .950 36.83 1.450 62.23 2.450 87.63 3.450 29 49 69 Part Numbers 3.68 [.145] 4.83 [.190] ACTION PIN Tail ACTION PIN Tail 149013-1 149014-1 149013-2 -- 149013-4 -- 149013-6 149014-6 Note: Refer to page 78 for information on ACTION PIN. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 72 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Receptacles (Board-to-Board) Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Receptacle Bus -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Receptacle Contact -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel A Position No. 2 7.24 [.285] Position No. 1 B 1.02 [.040] 4.93 [.195] Related Product Data Performance Characteristics -- page 67 Mating Plugs -- pages 68, 70-72 Technical Documents -- page 81 2.16 [.085] Solder Tail (see chart) Position No. 4 C spaces at 1.27 [.050] = D Position No. 2 Ground Bus Position No. 1 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 +0.08 0.71 -0.15 Position No. 3 [.028+.003 -.006] Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) No. of Positions 40 60 80 120 140 160 180 200 220 240 28.96 1.140 41.66 1.640 54.36 2.140 67.06 2.640 79.76 3.140 92.48 3.640 105.16 4.140 117.86 4.640 130.56 5.140 143.26 5.640 155.96 6.140 Dimensions B C 26.34 1.037 39.01 1.537 51.74 2.037 64.44 2.537 77.14 3.037 89.84 3.537 102.54 4.037 115.24 4.537 127.94 5.037 140.64 5.537 153.34 6.037 19 29 39 49 59 69 79 89 99 109 119 D 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 113.03 4.450 125.73 4.950 138.43 5.450 151.13 5.950 Part Numbers 3.18 [.125] Solder Tail 4.57 [.180] Solder Tail 536279-1 536254-1 536255-1 536279-2 536254-2 536255-2 536279-3 536254-3 536255-3 536279-4 536254-4 536255-4 536279-5 536254-5 536255-5 536279-6 536254-6 536255-6 536279-7 536254-7 536255-7 536279-8 536254-8 -- 536279-9 536254-9 536255-9 1-536279-0 -- -- 1-536279-1 -- -- 2.41 [.095] Solder Tail Micro-Strip Interconnection System 100 A Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 73 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Right-Angle Receptacles (Board-to-Board) Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Receptacle Bus -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Receptacle Contact -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 3.18 [.125] Dia. (2 Plc) A B 12.19 [.480] 1.01 [.040] Position No. 2 Indicator C Related Product Data 8.00 [.315] Performance Characteristics -- page 67 Mating Plugs -- pages 68, 70-72 Technical Documents -- page 81 Position No. 1 Indicator Solder Tail (see chart) Position No. 4 D spaces at 1.27 [.050] = E 6.35 [.250] 6.35 [.250] Position No. 2 4 spaces at 1.27 [.050] = 5.08 [.200] 3.18 [.125] Dia. (2 Plc.) Ground Bus Position No. 1 Position No. 1 Position No. 3 +0.08 0.71 -0.15 [.028+.003 -.006] Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) No. of Positions 40 Micro-Strip Interconnection System 60 80 100 120 140 160 200 Dimensions C A B 43.18 1.700 55.88 2.200 68.58 2.700 81.28 3.200 93.98 3.700 106.68 4.200 119.38 4.700 144.78 5.700 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 113.03 4.450 138.43 5.450 26.34 1.037 39.04 1.537 51.74 2.037 64.44 2.537 77.14 3.037 89.84 3.537 102.54 4.037 127.94 5.037 D 19 29 39 49 59 69 79 99 E 24.13 .950 36.83 1.450 49.53 1.950 62.23 2.450 74.93 2.950 87.63 3.450 100.33 3.950 125.73 4.950 Part Numbers 2.41 [.095] 3.18 [.125] Solder Tail Solder Tail 536295-1 536297-1 536295-2 536297-2 536295-3 536297-3 536295-4 536297-4 536295-5 536297-5 -- 536297-6 536295-7 -- 536295-9 536297-9 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 74 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Right-Angle Receptacles with Guides (Board-to-Board) Material and Finish Housing -- High-temperature thermoplastic, flame retardant, natural color Receptacle Bus -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Receptacle Contact -- Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 3.18 [.125] Dia. (2 Plc) A B 12.19 [.480] 1.01 [.040] Position No. 2 Indicator 3.56 [.140] Dia. (2 Plc) C 8.00 [.315] Related Product Data Performance Characteristics -- page 67 Mating Plugs -- pages 69 Technical Documents -- page 81 Position No. 1 Indicator Solder Tail (see chart) Position No. 4 D spaces at 1.27 [.050] = E 8.89 [.350] 4 spaces at 1.27 [.050] = 5.08 [.200] 3.18 [.125] Dia. (2 Plc.) 8.89 [.350] Position No. 2 Ground Bus Position No. 1 Position No. 1 +0.08 0.71 -0.15 Position No. 3 [.028+.003 -.006] Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) No. of Positions 140 160 200 240 B 48.26 1.900 111.76 4.400 124.46 4.900 149.86 5.900 175.26 6.900 41.91 1.650 105.41 4.150 118.11 4.650 143.51 5.650 168.91 6.650 26.34 1.037 89.84 3.537 102.54 4.037 127.94 5.037 153.34 6.037 D 19 69 79 99 119 E 24.13 .950 87.63 3.450 100.33 3.950 125.73 4.950 151.13 5.950 Part Numbers 2.41 [.095] 3.18 [.125] Solder Tail Solder Tail 536296-9 -- 536296-3 -- 536296-4 149031-1 536296-6 -- -- 149031-2 Micro-Strip Interconnection System 40 Dimensions C A Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 75 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208