ARef.
Typ.
B
C
A
A
20.00
[.788]
Typ.
0.20
[.008]
0.94
[.037]
6.73 ±0.04
[.265 ±.002]
5.97
[.235]
0.95
[.038]
1.33
[.053]
Ref.
7.14
[.281]
Ref.
Ø 0.89
[.035]
Position No. 1
29 Spaces at
0.50 [.020] Typ.
=14.50 [.571]
+0.08
–0.03
+.003
–.001
29.24
[1.151 ]
Section A-A
Typ.
0.64
[.025]
Typ.
0.30
[.012]
2 Plcs.
1.05
[.041]
6.35
[.250]
16.89
[.665]
5.28
[.208]
1.45
[.057]
3.10
[.122]
Orientation Hole
2 Plcs.
CRef.
ESpaces at
20.00 [.788] = FPosition No. 1
Position No. 2
Pad
BRef.
TOL D
D
65
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR SB
Interconnection System
Recommended PC Board Layout
(Viewed from Connector Side)
Note: Parts are available with
vacuum dots for robotic
placement.
0.50 [.020] Centerline
30.00 [1.181] Stack Height
Plugs
Gold Flash Plating 10 µ Gold Plating
Packaging No. of Dimensions Vacuum Dots Vacuum Dots
Type Positions ABCDEF Without With Without With
60 20.02 14.50 18.49 0.10 00.00 1658061-1 — 1658030-1 —
.788 .571 .728 .004 .000
120 40.01 34.51 38.48 0.10 120.00 1658061-2 — 1658030-2 —
1.575 1.359 1.515 .004 .788
Tray 180 60.02 54.51 58.50 0.10 240.00 1658061-3 — 1658030-3 —
2.363 2.146 2.303 .004 1.575
240 80.01 74.51 78.49 0.15 360.01 1658061-4 — 1658030-4 —
3.150 2.934 3.090 .006 2.362
300 100.03 94.51 98.50 0.15 480.01 1658061-5 — 1658030-5 —
3.938 3.721 3.878 .006 3.150
MICTOR SB Interconnection System (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: All part numbers are RoHS compliant.
66
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Introduction to the Micro-Strip Interconnection System
(1.27 x 2.54 [.050 x .100] Centerline)
Product Facts
■Designed for high speed
applications
■Provides controlled
impedance
■Low inductance
■High density
■Superior electrical
performance down to 100
picosecond rise times
■40 high speed signal lines
per inch
■Daughtercard-to-
motherboard stacking
connectors available in
sizes of 40 to 240 positions
■Custom stacking heights
available: between 10.92
[.430] and 18.75 [.738] or
31.12 [1.225] and 38.94
[1.533]
■Cable-to-board system
available in sizes of 40 to
120 positions
■Vertical and right-angle
board mount receptacles for
cable connectors
■Connector housings are
polarized
■Recognized under the
Component Program
of Underwriters
Laboratories Inc.,
File No. E28476
■Certified by Canadian
Standards
Association,
File No. LR 7189
R
R
Tyco Electronics Micro-Strip
connectors are a high
density, controlled
impedance connector
family compatible with the
requirements of high den-
sity and high speed data
transmission technologies.
Each signal line within the
mated connector is located
at a specific distance from
an integral, separable bus
bar serving as a ground
plane in a micro-strip
configuration. The selection
of housing dielectric,
spacing from signal
contact-to-ground plane
and conductor geometry
provide a specific charac-
teristic impedance plus
very low inductance and
capacitance.
Discontinuities resulting
from connector structure
and solder interfaces are
dimensionally small and
therefore appear transpar-
ent to high speed signals.
Both vertical and right-
angle board-to-board and
cable-to-board connector
versions share a nominal
impedance of 50 ohms
(single ended) or 100 ohms
(differential pair).
Each one inch length of
connector houses two elec-
trically isolated high current
contacts. When soldered to
the PC board ground plane,
that ground plane is
extended through the
mated connector.
Resistance is minimized
by a large contact area and
short electrical length, pro-
viding signal return paths
with negligible ground loop
voltages. Since signal
return is via the bus bars,
signal-ground-signal
alternation, common to
high speed applications,
becomes unnecessary. All
contacts can be dedicated
to signal transmission,
effectively doubling
connector density.
Introduction to the Micro-Strip Interconnection System
(1.27 x 2.54 [.050 x .100] Centerline) (Continued)
Performance
Characteristics
Connector Impedance —
50 ohms ±10% at 1 ns
Configuration — 2.54 [.100]
signal row-to-signal row,
1.27 [.050] signal-to-ground,
1.27 [.050] signal-to-signal
Right-Angle Board-to-Board Application* (Small Paddlecard Applications)
10.92
[.430]
Vertical
Receptacle
(See page 73)
Vertical
Receptacle
(See page 73)
Right-Angle
Receptacles
(See pages 74 and 75)
Vertical
Plugs
(See pages 68-70)
Vertical
Plugs
(See pages 71 and 72)
Vertical
Plugs
(See pages 68-70)
Mated
18.75
[.738]
9.27
[.365]
Mated
Vertical Board-to-Board Stacking Applications
* Not recommended for use as a daughtercard/backplane interconnector.
Vertical Plug
(Pages 68 and 70)
Extended
Vertical
Receptacle
(Above)
31.12
[1.225]
Stacking
Height
Vertical Plug
(Pages 71 and 72)
Extended
Vertical
Receptacle
(Above)
38.94
[1.533]
Stacking
Height
Vertical and Right-Angle Cable-to-Board Applications
(Ref. Tyco Electronics Catalog 65069,
Micro-Strip Cable Assemblies)
67
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
68
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
Micro-Strip Vertical Plugs with Guides (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
10.92 [.430]
Stacking Height
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Bus Bar — Phosphor bronze; duplex
plated 0.00076 [.000030] gold in mat-
ing area, 0.00254 [.000100] tin-lead in
terminating area, with entire bus under-
plated 0.00127 [.000050] nickel
Signal Pin — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire contact
underplated 0.00127 [.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Receptacles —
pages 73, 74 and 76
Technical Documents — page 81
A
B
C
Solder Tail
(see chart)
7.24
[.285]
8.64
[.340]
4.83
[.190]
Position No. 1
Indicator
Position No. 2
Indicator
Position No. 1
Ground Bus
Position No. 1
Position No. 3
Position No. 2
Position No. 4
Dspaces at
1.27 [.050] = E
4spaces at 1.27 [.050] = 5.08 [.200]
0.71 +0.08
-0.15
Dia. Typ.
[.028+.003]
-.006
Dimensions Part Numbers
No. of
ABCDE
2.41 [.095] 3.18 [.125]
Positions Solder Tail Solder Tail
40 30.84 29.08 26.62 19 24.13
1.214 1.145 1.048 .950 536280-1䢇536272-1䢇
60 43.54 41.78 39.32 29 36.83
1.714 1.645 1.548 1.450 536280-2䢇536272-2䢇
80 56.24 54.48 52.02 39 49.53
2.214 2.145 2.048 1.950 536280-3䢇536272-3䢇
100 68.94 67.18 64.72 49 62.23
2.714 2.645 2.548 2.450 536280-4䢇536272-4䢇
120 81.64 79.88 77.42 59 74.93
3.214 3.145 3.048 2.950 536280-5䢇536272-5䢇
140 94.34 92.58 90.12 69 87.63
3.714 3.645 3.548 3.450 536280-6䢇536272-6䢇
160 107.04 105.28 102.82 79 100.33
4.214 4.145 4.048 3.950 536280-7䢇536272-7䢇
180 119.74 117.98 115.52 89 113.03
4.714 4.645 4.548 4.450 536280-8䢇536272-8䢇
200 132.44 130.68 128.22 99 125.73
5.214 5.145 5.048 4.950 536280-9䢇536272-9䢇
Recommended PC Board Layout
69
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
10.92 [.430]
Stacking Height
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Bus Bar — Phosphor bronze; duplex
plated 0.00076 [.000030] gold in mat-
ing area, 0.00254 [.000100] tin-lead in
terminating area, with entire bus under-
plated 0.00127 [.000050] nickel
Signal Pin — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire contact
underplated 0.00127 [.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Receptacles — page 75
Technical Documents — page 81
Note: Guide Pins must be
purchased separately; order
Part Number 536304-2.
Dimensions Part Number
No. of
ABCDEFG
3.18 [.125]
Positions Solder Tail
140 114.30 105.41 94.34 92.58 90.12 69 87.63
4.500 4.150 3.714 3.645 3.548 3.450 536303-1䢇
160 127.00 118.11 107.04 105.28 102.82 79 100.33
5.000 4.650 4.214 4.145 4.048 3.950 536303-2䢇
200 152.40 143.51 132.44 130.68 128.22 99 125.73
6.000 5.560 5.214 5.145 5.048 4.950 536303-4䢇
C
E
8.64
[.340]
4.47
[.176] Dia
(2 Plc.)
7.24
[.285]
3.35
[.132]
Position No. 2
Indicator
Position No. 1
Indicator
4.83
[.190]
Solder Tail
(see chart)
Position No. 1
Position No. 2
Position No. 4
Ground Bus
Position No. 1
Position No. 3
B
Fspaces at 1.27 [.050] = G
0.71 +0.08
-0.15
4spaces
at 1.27 [.050]
=5.08 [.200]
3.18 Dia.
[.125]
(2 Plc.)
8.89 [.350] 8.89 [.350]
A
B
D
[.028+.003]
-.006
Recommended PC Board Layout
Micro-Strip Vertical Plugs with Guides (Board-to-Board) (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
70
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
Micro-Strip Vertical Plugs with ACTION PIN Contacts
(Board-to-Board)
10.92 [.430]
Stacking Height
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Bus Bar — Phosphor bronze; duplex
plated 0.00076 [.000030] gold in mat-
ing area, 0.00254 [.000100] tin-lead in
terminating area, with entire bus under-
plated 0.00127 [.000050] nickel
Signal Pin — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire contact
underplated 0.00127 [.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Receptacles —
pages 73, 74 and 76
ACTION PIN Contacts —
pages 78 and 79
Application Tooling —
pages 80
Technical Documents — page 81
Recommended PC Board Layout
(Connector Side of Board Shown)
A
C
B
ACTION PIN
Tail
(see chart)
8.64
[.340]
7.24
[.285]
Position No. 1
Position No. 2
Position No. 4
Position No. 3
Ground Bus
Position No. 1
4 spaces at 1.27 [.050] = 5.08 [.200]
0.61±0.05
[.024±.002] Dia. Typ.
After Plating
4.83
[.190]
Position No. 2
Indicator
Position No. 1
Indicator
Dspaces at
1.27 [.050] = E
Dimensions Part Numbers
No. of
ABCDE 3.68 [.145]
Positions ACTION PIN Tail
40 30.84 29.08 26.62 19 24.13
1.214 1.145 1.048 .950 536274-1䢇
80 56.24 54.48 52.02 39 49.53
2.214 2.145 2.048 1.950 536274-3䢇
100 68.94 67.18 64.72 49 62.23
2.714 2.645 2.548 2.450 536274-4䢇
120 81.64 79.88 77.42 59 74.93
3.214 3.145 3.048 2.950 536274-5䢇
140 94.34 92.58 90.12 69 87.63
3.714 3.645 3.548 3.450 536274-6䢇
160 107.04 105.28 102.82 79 100.33
4.214 4.145 4.048 3.950 536274-7䢇
180 119.74 117.98 115.52 89 113.03
4.714 4.645 4.548 4.450 536274-8䢇
Note: Refer to page 78 for information on ACTION PIN.
18.75 [.738]
Stacking Height
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Bus Bar — Phosphor bronze; duplex
plated 0.00076 [.000030] gold in mat-
ing area, 0.00254 [.000100] tin-lead in
terminating area, with entire bus under-
plated 0.00127 [.000050] nickel
Signal Pin — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire contact
underplated 0.00127 [.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Receptacles —
pages 73, 74 and 76
Technical Documents — page 81
Recommended PC Board Layout
(Component Side of Board)
Dimensions Part Numbers
No. of
ABCDE
2.41 [.095] 3.18 [.125] 4.70 [.185]
Positions Solder Tail Solder Tail Solder Tail
40 30.84 29.21 26.62 19 24.13
1.214 1.150 1.048 .950 149009-1䢇149011-1䢇149012-1䢇
60 43.54 41.91 39.32 29 36.83
1.714 1.650 1.548 1.450 149009-2䢇149011-2䢇149012-2䢇
80 56.24 54.61 52.02 39 49.53
2.214 2.150 2.048 1.950 149009-3䢇149011-3䢇149012-3䢇
100 68.94 67.31 64.72 49 62.23
2.714 2.650 2.548 2.450 149009-4䢇149011-4䢇—
120 81.64 80.01 77.42 59 74.93
3.214 3.150 3.048 2.950 149009-5䢇149011-5䢇—
140 94.34 92.71 90.12 69 87.63
3.714 3.650 3.548 3.450 149009-6䢇149011-6䢇—
160 107.04 105.41 102.82 79 100.33
4.214 4.150 4.048 3.950 149009-7䢇149011-7䢇—
180 119.74 118.11 115.52 89 113.03
4.714 4.650 4.548 4.450 149009-8䢇149011-8䢇—
200 132.44 130.81 128.22 99 125.73
5.214 5.150 5.048 4.950 149009-9䢇149011-9䢇—
Dspaces at
1.27 [.050] = EPosition No. 1
Position No. 2
Position No. 4
Ground Bus
Position No. 1
Position No. 3
0.71±0.08
[.028±.003] Dia. Typ.
4 spaces at 1.27 [.050] = 5.08 [.200]
7.24
[.285]
4.83
[.190]
16.46
[.648]
2.54 [.100]
4.78
[.188]
C
A
B
Position No. 2
Indicator
Solder Tail
(see chart)
Position No. 1
Indicator
71
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
Micro-Strip Vertical Plugs (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
72
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
Micro-Strip Vertical Plugs with ACTION PIN Contacts (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
18.75 [.738]
Stacking Height
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Bus Bar — Phosphor bronze; duplex
plated 0.00076 [.000030] gold in mat-
ing area, 0.00254 [.000100] tin-lead in
terminating area, with entire bus under-
plated 0.00127 [.000050] nickel
Signal Pin — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire contact
underplated 0.00127 [.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Receptacles —
pages 73, 74 and 76
ACTION PIN Contacts —
pages 78 and 79
Application Tooling —
pages 80
Technical Documents — page 81
Recommended PC Board Layout
(Connector Side of Board Shown)
Dimensions Part Numbers
No. of
ABCDE 3.68 [.145] 4.83 [.190]
Positions ACTION PIN Tail ACTION PIN Tail
40 30.84 29.21 26.62 19 24.13
1.214 1.150 1.048 .950 149013-1䢇149014-1䢇
60 43.54 41.91 39.32 29 36.83
1.714 1.650 1.548 1.450 149013-2䢇—
100 68.94 67.31 64.72 49 62.23
2.714 2.650 2.548 2.450 149013-4䢇—
140 94.34 92.71 90.12 69 87.63
3.714 3.650 3.548 3.450 149013-6䢇149014-6䢇
Note: Refer to page 78 for information on ACTION PIN.
Position No. 1
Position No. 3
Position No. 2
Position No. 4
Ground Bus
Position No. 1
0.61±0.05
[.024±.002] Dia. Typ.
After Plating
4 spaces at 1.27 [.050] = 5.08 [.200]
Position No. 1
Indicator
Position No. 2
Indicator
2.54
[.100]
4.83
[.190]
16.46
[.648]
ACTION PIN Tail
(see chart)
C
A
B
7.24
[.285]
Dspaces at
1.27 [.050] = E
73
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
Dimensions Part Numbers
No. of
ABCD
2.41 [.095] 3.18 [.125] 4.57 [.180]
Positions Solder Tail Solder Tail Solder Tail
40 28.96 26.34 19 24.13
1.140 1.037 .950 536279-1䢇536254-1䢇536255-1䢇
60 41.66 39.01 29 36.83
1.640 1.537 1.450 536279-2䢇536254-2䢇536255-2䢇
80 54.36 51.74 39 49.53
2.140 2.037 1.950 536279-3䢇536254-3䢇536255-3䢇
100 67.06 64.44 49 62.23
2.640 2.537 2.450 536279-4䢇536254-4䢇536255-4䢇
120 79.76 77.14 59 74.93
3.140 3.037 2.950 536279-5䢇536254-5䢇536255-5䢇
140 92.48 89.84 69 87.63
3.640 3.537 3.450 536279-6䢇536254-6䢇536255-6䢇
160 105.16 102.54 79 100.33
4.140 4.037 3.950 536279-7䢇536254-7䢇536255-7䢇
180 117.86 115.24 89 113.03
4.640 4.537 4.450 536279-8䢇536254-8䢇—
200 130.56 127.94 99 125.73
5.140 5.037 4.950 536279-9䢇536254-9䢇536255-9䢇
220 143.26 140.64 109 138.43
5.640 5.537 5.450 1-536279-0䢇——
240 155.96 153.34 119 151.13
6.140 6.037 5.950 1-536279-1䢇——
Recommended PC Board Layout
(Connector Side of Board Shown)
A
B
7.24
[.285]
1.02
[.040]
4.93
[.195]
2.16
[.085]
Solder Tail
(see chart)
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Receptacle Bus — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire bus
underplated 0.00127 [.000050] nickel
Receptacle Contact — Phosphor
bronze; duplex plated 0.00076
[.000030] gold in mating area, 0.00254
[.000100] tin-lead in terminating area,
with entire contact underplated 0.00127
[.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Plugs — pages 68, 70-72
Technical Documents — page 81
Position No. 1
Position No. 2
Cspaces at
1.27 [.050] = DPosition No. 2
Position No. 4
Position No. 1
Ground Bus
Position No. 1
Position No. 3
4 spaces at 1.27 [.050] = 5.08 [.200]
0.71 +0.08
-0.15
Dia. Typ.
[.028+.003]
-.006
Micro-Strip Vertical Receptacles (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
74
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
Micro-Strip Right-Angle Receptacles (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Receptacle Bus — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire bus
underplated 0.00127 [.000050] nickel
Receptacle Contact — Phosphor
bronze; duplex plated 0.00076
[.000030] gold in mating area, 0.00254
[.000100] tin-lead in terminating area,
with entire contact underplated 0.00127
[.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Plugs — pages 68, 70-72
Technical Documents — page 81
A
B
C
8.00
[.315]
12.19
[.480]
1.01
[.040]
Position No. 2
Indicator
Position No. 1
Indicator
Solder Tail
(see chart)
3.18
[.125] Dia.
(2 Plc)
Dspaces at
1.27 [.050] = E
6.35
[.250]
6.35
[.250]
3.18
[.125] Dia.
(2 Plc.)
Position No. 2
Position No. 1
Position No. 3
Position No. 4
Ground Bus
Position No. 1
4spaces at 1.27 [.050] = 5.08 [.200]
0.71 +0.08
-0.15
Dia. Typ.
Recommended PC Board Layout
(Connector Side of Board Shown)
[.028+.003]
-.006
Dimensions Part Numbers
No. of
ABCDE 2.41 [.095] 3.18 [.125]
Positions Solder Tail Solder Tail
40 43.18 36.83 26.34 19 24.13
1.700 1.450 1.037 .950 536295-1䢇536297-1䢇
60 55.88 49.53 39.04 29 36.83
2.200 1.950 1.537 1.450 536295-2䢇536297-2䢇
80 68.58 62.23 51.74 39 49.53
2.700 2.450 2.037 1.950 536295-3䢇536297-3䢇
100 81.28 74.93 64.44 49 62.23
3.200 2.950 2.537 2.450 536295-4䢇536297-4䢇
120 93.98 87.63 77.14 59 74.93
3.700 3.450 3.037 2.950 536295-5䢇536297-5䢇
140 106.68 100.33 89.84 69 87.63
4.200 3.950 3.537 3.450 — 536297-6䢇
160 119.38 113.03 102.54 79 100.33
4.700 4.450 4.037 3.950 536295-7䢇—
200 144.78 138.43 127.94 99 125.73
5.700 5.450 5.037 4.950 536295-9䢇536297-9䢇
75
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Micro-Strip
Interconnection System
A
B
C
Solder Tail
(see chart)
12.19
[.480]
1.01 [.040]
8.00
[.315]
3.56 [.140] Dia.
(2 Plc)
3.18
[.125] Dia.
(2 Plc)
Position No. 2
Indicator
Position No. 1
Indicator
Dimensions Part Numbers
No. of
ABCDE 2.41 [.095] 3.18 [.125]
Positions Solder Tail Solder Tail
40 48.26 41.91 26.34 19 24.13
1.900 1.650 1.037 .950 536296-9䢇—
140 111.76 105.41 89.84 69 87.63
4.400 4.150 3.537 3.450 536296-3䢇—
160 124.46 118.11 102.54 79 100.33
4.900 4.650 4.037 3.950 536296-4䢇149031-1䢇
200 149.86 143.51 127.94 99 125.73
5.900 5.650 5.037 4.950 536296-6䢇—
240 175.26 168.91 153.34 119 151.13
6.900 6.650 6.037 5.950 — 149031-2䢇
Material and Finish
Housing — High-temperature thermo-
plastic, flame retardant, natural color
Receptacle Bus — Phosphor bronze;
duplex plated 0.00076 [.000030] gold in
mating area, 0.00254 [.000100] tin-lead
in terminating area, with entire bus
underplated 0.00127 [.000050] nickel
Receptacle Contact — Phosphor
bronze; duplex plated 0.00076
[.000030] gold in mating area, 0.00254
[.000100] tin-lead in terminating area,
with entire contact underplated 0.00127
[.000050] nickel
Related Product Data
Performance Characteristics —
page 67
Mating Plugs — pages 69
Technical Documents — page 81
Dspaces at
1.27 [.050] = E
8.89
[.350]
8.89
[.350]
Position No. 1
Ground Bus
Position No. 1
Position No. 2
Position No. 3
Position No. 4
4 spaces at 1.27 [.050] = 5.08 [.200]
3.18
[.125] Dia.
(2 Plc.) 0.71 +0.08
-0.15
Dia. Typ.
Recommended PC Board Layout
(Connector Side of Board Shown)
[.028+.003]
-.006
Micro-Strip Right-Angle Receptacles with Guides (Board-to-Board)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
