2-39
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
2
3mm Round
®
OptopipeTM
Optical Light Pipe
and Light Shield, 3 Array
515-1020-805
DIRECTION
OF LIGHT
1.52
[.060]
6.35
[.250]
2.34
[.092]
8.69
[.342] 4.01
[.158]
1.35
[.053]
1.45
[.057]
1.70
[.067]
13.06
[.514] 3.56
[Ø.140]
6.35
[.250] 3.18
[.125]
3.61
[.142]
4.19
[.165
]
2.39
[.094]
2.00
[.079] TYP;
(2) PLACES
16.26
[.640]
RECOMMENDED PIN HOLES AND SOLDER PAD
LAYOUT FOR SUGGESTED MicroLED LEDs
COMPONENT SIDE OF PRINTED CIRCUIT BOARD
3.00
[.118]
NOTE:
C.L. of
LED
3.56
[.140]
1.93
[.076 ±.002]
Dimensions in mm [inches]
NOTE: designed for
post-reflow
PC board insertion.
Recommended
MicroLED SMT LEDs
for use with 515-1020-805
PART NO. COLOR PAGE #
597-3111-4xx AlGaAs Red 1-28
597-3201-4xx Orange 1-28
597-3311-4xx Green 1-28
597-3401-4xx Yellow 1-28
Features
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This light pipe’s circular light emitting surfaces appear bright and have good optical isolation. It is reliably held in place
by 2 press-fit pins located between the light pipe elements. This Optopipe™ functions as a through-the-case indicator with
a textured finish on the 3 light emitting surface that increases its viewing angle. The LEDs are mounted in a straight line
on a 0.250" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen
index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NEW