QPQ1289 LTE Band 4 / 10 / 66 BAW Duplexer (R) Product Overview The QPQ1289 is a high performance Bulk Acoustic Wave (BAW) Duplexer designed for Small Cell applications. It is specifically designed to address bands 4, 10, and 66. For band 66, the uplink is fully covered while the downlink is partially covered with 70 MHz bandwidth. The QPQ1289 provides low insertion loss and high rejection making it an ideal choice for Small Cells. This duplexer is housed in a compact, RoHs compliant 2.00 mm x 2.50 mm x 0.91 mm surface mount package (SMP). The QPQ1289 is part of Qorvo's extensive portfolio of RF BAW and SAW filters. Functional Block Diagram GND DL GND 1 8 2 9 UL 7 3 GND 6 ANT 5 GND 9 Pad 2.00 mm x 2.50 mm x 0.91 mm SMP Key Features 70 MHz Bandwidth High Attenuation Low Loss Excellent Wi-Fi Rejection Single Input, Single Output Operation Small Size: 2.00 x 2.50 x 0.91 mm Surface Mount Device RoHS compliant (2002/95/EC), Pb-free P b GND 4 Applications GND Top View Pin Configuration - Single Ended Pin No. 1 2, 4, 5, 7, 8, 9 3 6 Label Downlink Ground Uplink Antenna port Data Sheet, May 4, 2017 | Subject to change without notice Extended Band 4 / 10 Partial Band 66 Base Station Infrastructure General Purpose Wireless Ordering Information Part No. Description QPQ1289SB Sample Bag with 5 pieces QPQ1289SR Sample Reel with 100 pieces QPQ1289TR7 7" Taped Reel with 2500 pieces QPQ1289EVB Assembled Evaluation Board 1 of 11 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Absolute Maximum Ratings (1) Parameter Minimum Lifetime Ratings Conditions Rating Storage Temperature -40 to +125C Operating Temperature (2) -40 to +95 C RF in, Pulsed, DL, +25C (3) +39.5 dBm Rating +29 dBm DL, +85C, FD-LTE, 5 MHz, 16QAM, PAR=8 dB >290,000 hours +23 dBm CW, UL, +85C >270,000 hours Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Device will function but it is not guaranteed to meet electrical specifications 3. Peak Power, 200mS pulse width, 2% Duty Cycle Electrical Specifications - Downlink (1) Test conditions unless otherwise specified. Temperature Range: -40 to +95 C Conditions (1, 2) Min Ty p Max Unit 2110 - 2180 MHz - 2.0 2.9 dB 2110 - 2170 MHz, B10DL - 2.0 - dB 2110 - 2155 MHz, B4DL - 2.0 - dB Input / Output Return Loss 2110 - 2180 MHz 9 12 - dB Amplitude Variation (3) 2110 - 2180 MHz - 0.6 1.0 dB 10 - 1680 MHz 32 35 - dB 1680 - 1800 MHz 42 45 - dB 2402 - 2494 MHz 38 43 - dB 2496 - 2690 MHz 31 38 - dB Parameter Insertion Loss (2) Attenuation (4) Electrical Specifications - Uplink (1) Test conditions unless otherwise specified. Temperature Range: -40 to +95 C Conditions (1, 2) Min Ty p Max Unit 1710 - 1780 MHz - 2.3 3.2 dB 1710 - 1770 MHz, B10UL - 2.3 - dB 1710 - 1755 MHz, B4UL - 2.3 - dB Input / Output Return Loss 1710 - 1780 MHz 9 11 - dB Amplitude Variation (3) 1710 - 1780 MHz - 0.7 1.5 dB dB Parameter Insertion Loss Attenuation (4) Notes: 1. 2. 3. 4. (2) 10 - 870 MHz 40 45 - 870 - 1680 MHz 25 32 - dB 1850 - 2050 MHz 38 45 - dB 2080 - 2225 MHz 32 35 - dB 2402 - 2494 MHz 34 37 - dB 2496 - 2690 MHz 18 34 - dB All specifications are based on the QORVO schematic for the main reference design. Maximum Insertion Loss within defined frequency range. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 10 MHz channels. Attenuation is referenced to zero dB Data Sheet, May 4, 2017 | Subject to change without notice 2 of 11 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Electrical Specifications - Isolation (1) Test conditions unless otherwise specified. Temperature Range: -40 to +95 C Parameter Isolation Notes: 1. 2. 3. 4. Conditions (1, 2) Min Ty p Max Unit 1710 - 1780 MHz 42 45 - dB 2110 - 2180 MHz 38 42 - dB 1710 - 1780 MHz, B10UL - 45 - dB 2110 - 2170 MHz, B10DL - 42 - dB 1710 - 1755 MHz, B4UL - 46 - dB 2110 - 2155 MHz, B4DL 40 44 - dB All specifications are based on the QORVO schematic for the main reference design. Maximum Insertion Loss within defined frequency range. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 10 MHz channels. Attenuation is referenced to zero dB Evaluation Board and Schematic - QPQ1289EVB Notes: 1. Distance from left side of L2 to right side of U1: 5 mils. Bill of Material - QPQ1289EVB Ref. Des. Value Description Manufacturer Part Number U1 N/A Band 66 BAW Duplexer Qorvo QPQ1289 N/A N/A Printed Circuit Board Qorvo 1140616 C2 3.3 pF Cap., Chip, 0402, 5%, 50V. NPO/COG Murata GJM1555C1H3R3BB01 C1 0.4 pF Cap., Chip, 0402, +/-0.1pF, 50V. NPO/COG Murata GJM1555C1HR40WB01 L2 5.6 nH Inductor, 0402, LQG Murata LQP03TN5N6H02 L1 1.8 nH Inductor, 0402, LQG Murata LQP03TN1N8B02 N/A N/A SMA Edge Connector Radial 9602-1111-018 Data Sheet, May 4, 2017 | Subject to change without notice 3 of 11 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Performance Plots Uplink Test conditions unless otherwise noted: Temp= +25C Uplink Frequency Response 0 d B -10 -2 -20 -3 -30 d B -40 -5 -6 -60 -7 1755 1955 2155 Frequency (MHz) -8 1675 2355 Uplink Wideband Response 0 1710 1745 Frequency (MHz) 1780 1815 1780 1815 Uplink Return Loss -5 -20 d B -4 -50 -70 1555 Uplink Passband Response -1 -10 d B -40 -60 -15 -20 -80 0 1500 3000 4500 6000 Frequency (MHz) Uplink Path - Antenna Port Impedance -25 1675 1710 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 -1 1745 Frequency (MHz) Uplink Port Impedance -0 .5 0 0 0.5 1 -1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 Data Sheet, May 4, 2017 | Subject to change without notice 4 of 11 0.5 1 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Performance Plots Downlink Test conditions unless otherwise noted: Temp= +25C Downlink Frequency Response 0 d B -10 -2 -20 -3 -30 d B -40 -5 -6 -60 -7 1755 1955 2155 Frequency (MHz) -8 2075 2355 Downlink Wideband Response 0 2110 2145 Frequency (MHz) 2180 2215 2180 2215 Downlink Return Loss -5 -20 d B -4 -50 -70 1555 Downlink Passband Response -1 -10 d B -40 -60 -15 -20 -80 0 1500 3000 4500 -25 2075 6000 Frequency (MHz) Downlink Path - Antenna Port Impedance 2110 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 -1 2145 Frequency (MHz) Downlink Port Impedance -0 .5 0 0 0.5 1 -1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 Data Sheet, May 4, 2017 | Subject to change without notice 5 of 11 0.5 1 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Performance Plots Isolation Test conditions unless otherwise noted: Temp= +25C Isolation 0 -20 d B -40 -60 -80 1675 1810 1945 Frequency (MHz) 2080 2215 2080 2215 Antenna Return Loss -5 -10 d B -15 -20 -25 1675 Data Sheet, May 4, 2017 | Subject to change without notice 1810 1945 Frequency (MHz) 6 of 11 www.qorvo.com QPQ1289 (R) LTE Extended Band 4 / Band 10 BAW Duplexer Package Dimensions Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M-1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. Data Sheet, May 4, 2017 | Subject to change without notice 7 of 11 www.qorvo.com QPQ1289 (R) LTE Extended Band 4 / Band 10 BAW Duplexer Package Marking Package Marking Qorvo Logo Product Identifier: 1289 Trace Code: XXXX PCB Mounting Pattern Notes: 1. 2. All dimensions are in millimeters. Angles are in degrees. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Data Sheet, May 4, 2017 | Subject to change without notice 8 of 11 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Tape and Reel Information - Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2500 pieces on a 7" reel. P1 P2 O1.50 +0.1/-0.0 4.00 O1.00 MIN A 0.300.05 1.750.10 R 0.20 MAX. F C W Bo Ao A Ko 0.12 COVER TAPE SECTION A-A 0.12 R0.25 Feature Symbol Size (in) Size (mm) Length A0 0.092 2.34 Width B0 0.112 2.85 Depth K0 0.043 1.10 Pitch P1 0.157 4.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.138 3.50 Cover Tape Width C 0.213 5.40 Carrier Tape Width W 0.315 8.00 Cavity Measure Data Sheet, May 4, 2017 | Subject to change without notice 9 of 11 www.qorvo.com QPQ1289 (R) LTE Extended Band 4 / Band 10 BAW Duplexer Tape and Reel Information - Reel Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2500 pieces on a 7" reel. Feature Flange Hub Measure Symbol Size (in) Size (mm) Diameter A 6.969 177.0 Thickness W2 0.559 14.2 Space Between Flange W1 0.346 8.8 Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0 Data Sheet, May 4, 2017 | Subject to change without notice 10 of 11 www.qorvo.com QPQ1289 LTE Extended Band 4 / Band 10 BAW Duplexer (R) Handling Precautions Parameter Rating Standard ESD - Human Body Model (HBM) Class 1C ESDA / JEDEC JS-001-2012 ESD - Charged Device Model (CDM) Class C3 ESDA / JEDEC JS-002-2014 MSL - Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Caution! ESD-Sensitive Device Solderability Compatible with both lead-free (260C max. reflow temp.) and tin/lead (245C max. reflow temp.) soldering processes. Solder profiles available upon request. Contact Plating: TBD RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2017 (c) Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Data Sheet, May 4, 2017 | Subject to change without notice 11 of 11 www.qorvo.com