QPQ1289
LTE Band 4 / 10 / 66 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
9 Pad 2.00 mm  x  2.50 mm x 0.91 mm SMP
Functional Block Diagram
Top View
Key Features
70 MHz Bandwidth
High Attenuation
Low Loss
Excellent Wi-Fi Rejection
Single Input, Single Output Operation
Small Size: 2.00 x 2.50 x 0.91 mm
Surface Mount Device
RoHS compliant (2002/95/EC), Pb-free
Pin Configuration - Single Ended
Pin No.
Label
1
Downlink
2, 4, 5, 7, 8, 9
Ground
3
Uplink
6
Antenna port
Ordering Information
Part No.
Description
QPQ1289SB
Sample Bag with 5 pieces
QPQ1289SR
Sample Reel with 100 pieces
QPQ1289TR7
7” Taped Reel with 2500 pieces
QPQ1289EVB
Assembled Evaluation Board
Applications
Extended Band 4 / 10
Partial Band 66
Base Station Infrastructure
General Purpose Wireless
Product Overview
The QPQ1289 is a high performance Bulk Acoustic Wave
(BAW) Duplexer designed for Small Cell applications. It is
specifically designed to address bands 4, 10, and 66. For
band 66, the uplink is fully covered while the downlink is
partially covered with 70 MHz bandwidth.
The QPQ1289 provides low insertion loss and high
rejection making it an ideal choice for Small Cells. This
duplexer is housed in a compact, RoHs compliant
2.00 mm x 2.50 mm x 0.91 mm surface mount package
(SMP).
The QPQ1289 is part of Qorvo’s extensive portfolio of RF
BAW and SAW filters.
2
3
6
54
ANT
GND
GND
GND
UL
DL 7
8
1
9GND
GND
GND
P
b
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Absolute Maximum Ratings (1)
Parameter
Rating
Storage Temperature 
−40 to +125°C
Operating Temperature (2)
−40 to +95 °C
RF in, Pulsed, DL, +25°C (3)
+39.5 dBm
Notes:
1. Operation of this device outside the parameter ranges given may
cause permanent damage.
2. Device will function but it is not guaranteed to meet electrical
specifications
3. Peak Power, 200mS pulse width, 2% Duty Cycle
Minimum Lifetime Ratings
Conditions
Rating
+29 dBm DL, +85°C, FD-LTE, 5 MHz,
16QAM, PAR=8 dB
>290,000 hours
+23 dBm CW, UL, +85°C
>270,000 hours
Electrical Specifications – Downlink (1)
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameter
Conditions (1, 2)
Min
Ty p
Max
Unit
Insertion Loss (2)
2110 – 2180 MHz
-
2.0
2.9
dB
2110 – 2170 MHz, B10DL
-
2.0
-
dB
2110 – 2155 MHz, B4DL
-
2.0
-
dB
Input / Output Return Loss
2110 – 2180 MHz
9
12
-
dB
Amplitude Variation (3)
2110 – 2180 MHz
-
0.6
1.0
dB
Attenuation (4)
10 – 1680 MHz
32
35
-
dB
1680 – 1800 MHz
42
45
-
dB
2402 – 2494 MHz
38
43
-
dB
2496 – 2690 MHz
31
38
-
dB
Electrical Specifications – Uplink (1)
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameter
Conditions (1, 2)
Min
Ty p
Max
Unit
Insertion Loss (2)
1710 – 1780 MHz
-
2.3
3.2
dB
1710 – 1770 MHz, B10UL
-
2.3
-
dB
1710 – 1755 MHz, B4UL
-
2.3
-
dB
Input / Output Return Loss
1710 – 1780 MHz
9
11
-
dB
Amplitude Variation (3)
1710 – 1780 MHz
-
0.7
1.5
dB
Attenuation (4)
10 – 870 MHz
40
45
-
dB
870 – 1680 MHz
25
32
-
dB
1850 – 2050 MHz
38
45
-
dB
2080 – 2225 MHz
32
35
-
dB
2402 – 2494 MHz
34
37
-
dB
2496 – 2690 MHz
18
34
-
dB
Notes:
1. All specifications are based on the QORVO schematic for the main reference design.
2. Maximum Insertion Loss within defined frequency range.
3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 10 MHz channels.
4. Attenuation is referenced to zero dB
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Evaluation Board and Schematic – QPQ1289EVB
Notes:
1. Distance from left side of L2 to right side of U1: 5 mils.
Bill of Material – QPQ1289EVB
Ref. Des.
Value
Description
Manufacturer
Part Number
U1
N/A
Band 66 BAW Duplexer
Qorvo
QPQ1289
N/A
N/A
Printed Circuit Board
Qorvo
1140616
C2
3.3 pF
Cap., Chip, 0402, 5%, 50V. NPO/COG
Murata
GJM1555C1H3R3BB01
C1
0.4 pF
Cap., Chip, 0402, +/-0.1pF, 50V. NPO/COG
Murata
GJM1555C1HR40WB01
L2
5.6 nH
Inductor, 0402, LQG
Murata
LQP03TN5N6H02
L1
1.8 nH
Inductor, 0402, LQG
Murata
LQP03TN1N8B02
N/A
N/A
SMA Edge Connector
Radial
9602-1111-018
Electrical Specifications – Isolation (1)
Test conditions unless otherwise specified. Temperature Range: −40 to +95 °C
Parameter
Conditions (1, 2)
Min
Ty p
Max
Unit
Isolation
1710 – 1780 MHz
42
45
-
dB
2110 – 2180 MHz
38
42
-
dB
1710 – 1780 MHz, B10UL
-
45
-
dB
2110 – 2170 MHz, B10DL
-
42
-
dB
1710 – 1755 MHz, B4UL
-
46
-
dB
2110 – 2155 MHz, B4DL
40
44
-
dB
Notes:
1. All specifications are based on the QORVO schematic for the main reference design.
2. Maximum Insertion Loss within defined frequency range.
3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 10 MHz channels.
4. Attenuation is referenced to zero dB
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Performance Plots Uplink
Test conditions unless otherwise noted: Temp= +25°C
Uplink Frequency Response
Frequency (MHz)
d
B
-70
-60
-50
-40
-30
-20
-10
0
1555 1755 1955 2155 2355
Uplink Passband Response
Frequency (MHz)
d
B
-8
-7
-6
-5
-4
-3
-2
-1
1675 1710 1745 1780 1815
Uplink Wideband Response
Frequency (MHz)
d
B
-80
-60
-40
-20
0
0 1500 3000 4500 6000
Uplink Return Loss
Frequency (MHz)
d
B
-25
-20
-15
-10
-5
1675 1710 1745 1780 1815
Uplink Path - Antenna Port Impedance
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
1
-1 -0.5 0 0.5 1
Uplink Port Impedance
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
1
-1 -0.5 0 0.5 1
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Performance Plots Downlink
Test conditions unless otherwise noted: Temp= +25°C
Downlink Frequency Response
Frequency (MHz)
d
B
-70
-60
-50
-40
-30
-20
-10
0
1555 1755 1955 2155 2355
Downlink Passband Response
Frequency (MHz)
d
B
-8
-7
-6
-5
-4
-3
-2
-1
2075 2110 2145 2180 2215
Downlink Wideband Response
Frequency (MHz)
d
B
-80
-60
-40
-20
0
0 1500 3000 4500 6000
Downlink Return Loss
Frequency (MHz)
d
B
-25
-20
-15
-10
-5
2075 2110 2145 2180 2215
Downlink Path - Antenna Port Impedance
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
1
-1 -0.5 0 0.5 1
Downlink Port Impedance
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
1
-1 -0.5 0 0.5 1
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Performance Plots Isolation
Test conditions unless otherwise noted: Temp= +25°C
Isolation
Frequency (MHz)
d
B
-80
-60
-40
-20
0
1675 1810 1945 2080 2215
Antenna Return Loss
Frequency (MHz)
d
B
-25
-20
-15
-10
-5
1675 1810 1945 2080 2215
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Package Dimensions
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Dimension and tolerance formats conform to ASME Y14.4M-1994.
3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Package Marking
Package Marking
Qorvo Logo
Product Identifier: 1289
Trace Code: XXXX
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be
necessary to suit end user assembly materials and processes.
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
Size (mm)
Cavity
Length
A0
0.092
2.34
Width
B0
0.112
2.85
Depth
K0
0.043
1.10
Pitch
P1
0.157
4.00
Centerline
Distance
Cavity to Perforation - Length Direction
P2
0.079
2.00
Cavity to Perforation - Width Direction
F
0.138
3.50
Cover Tape
Width
C
0.213
5.40
Carrier Tape
Width
W
0.315
8.00
0.12
0.12
Bo
Ao
4.00
P2
P1
Ø1.00 MIN A
A
F
1.75±0.10
W
Ko
0.30±0.05
SECTION A-A
Ø1.50 +0.1/-0.0
C
COVER TAPE
R0.25
R 0.20 MAX.
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Tape and Reel Information – Reel Dimensions
Tape and reel specifications for this part are also available on the Qorvo website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Symbol
Size (in)
Size (mm)
Flange
Diameter
A
6.969
177.0
Thickness
W2
0.559
14.2
Space Between Flange
W1
0.346
8.8
Hub
Outer Diameter
N
2.283
58.0
Arbor Hole Diameter
C
0.512
13.0
Key Slit Width
B
0.079
2.0
Key Slit Diameter
D
0.787
20.0
QPQ1289
LTE Extended Band 4 / Band 10 BAW Duplexer
Data Sheet, May 4, 2017 | Subject to change without notice
www.qorvo.com
®
Solderability
Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes.
Solder profiles available upon request.
Contact Plating: TBD
RoHS Compliance
This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment) as amended by Directive 2015/863/EU.
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations:
Web: www.qorvo.com
Tel: 1-844-890-8163
Email: customer.support@qorvo.com
For technical questions and application information: Email: appsupport@qorvo.com
Important Notice
The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained
herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained
herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for
Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED
HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER
EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical,
life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Copyright 2017 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc.
Handling Precautions
Parameter
Rating
Standard
Caution!
ESD-Sensitive Device
ESD – Human Body Model (HBM)
Class 1C
ESDA / JEDEC JS-001-2012
ESD – Charged Device Model (CDM)
Class C3
ESDA / JEDEC JS-002-2014
MSL – Moisture Sensitivity Level
Level 3
IPC/JEDEC J-STD-020
Pb