H A-A A d1 D d2 essentracomponents.com 2013 Essentra Components. All rights reserved. Registered in England, Company No. 547495. Registered Office: Avebury House, 201-249 Avebury Boulevard, Milton Keynes, MK9 1AU Condition of Sale can be found on our website: essentra.com. Essentra Components does not warrant that the files will be error free and may create new versions ("Upgrades") at any time, which may correct such errors. Essentra Components has no obligation to notify you of such upgrades. Any upgraded file will be published to the website, when it becomes available. A You are not permitted to load any of the files on to a network server for the purposes of distribution to one or more other computer(s) on that network or to effect such distribution. Essentra Components shall not be liable for any loss or damage whatsoever or however caused, arising directly or indirectly from the use of the files. h UNLESS OTHERWISE STATED ALL DIMENSIONS IN mm DO NOT SCALE LINEAR TOLERANCE THIRD ANGLE PROJECTION SIZE (0.0) (0.00) (0) 0-10mm 0.10 0.15 0.5 10-30mm 0.15 0.20 0.5 30-50mm 0.20 0.5 0.30 50-100mm 0.25 0.8 0.50 ANGULAR TOLERANCE 0.5 DEGREES 100-200mm 0.40 1.5 0.80 UNSPECIFIED RADII 0.25mm 200-300mm 0.80 DRAFT ANGLE 0.5 DEGREES 2.0 1.20 300-500mm 1.00 DIMENSIONS IN BRACKETS [ ] ARE 3.0 2.00 +500mm 1.50 IN INCHES FOR REFERENCE ONLY 5.0 3.00 UNCONTROLLED ORG.SCALE MATERIAL Part Number Mounting Hole Panel Hole Thickness d1 D H Material Part ID 498065 5.0 1.0 3.0 8.0 4.0 EPDM 1126584 ITEM No. TITLE NTS CREATE DATE. 16/Dec/2014 PVC / EPDM 498065 STANDARD GROMMET (METRIC) DWG.No. ISSUE No. P110590-2 2