Ohmite's TAP600 delivers 600 watts of reliable power to a variety of power conditioning, power transmission, and power control applications. These resistors can be designed for liquid or air cooled heat sink systems. Applications include variable speed drives, power supplies, robotics, motor control, and other control devices. FeatureS SPeciFicationS Electrical Resistance Values: 0.25 to 100K (0.1 to <0.25 avail. in HC version only) Resistance Tolerance: 10% Std., 5% available on request. TAP600 Series 600 Watt Heat Sinkable Planar o0.159-0.169" (4.05-4.3mm) *Also C L to C L dimension for mounting holes 1.331-1.346" (33.8-34.2mm) RoHS compliant Non-compliant version unavailable TA P 6 0 0 H C K 5 R 0 E Tolerance J = 5% K = 10%, Std. L = 20% Resistance 1 Ohm = 1R0 10 Ohm = 10R 1000 Ohm = 1K0 Check product availability at www.ohmite.com Ohmite Mfg. Co. 2.527-2.591" (64.2-65.8mm) 1.409-1.425" (35.8-36.2mm) II 0.295-0.335" (7.5-8.5mm) 0.177-0.216" (4.5-5.5mm) 1.240-1.279" (31.5-32.5mm) 1.161-1.201" (29.5-30.5mm) 0.571-610" (14.5-15.5mm) Percent rated power 120 720 100 600 80 480 60 360 40 240 20 120 0 0 25 50 75 100 125 150 Bottom of base plate Temperature, C 175 Rated power, watts O R D E R I N G I N F O R M AT I O N Style 0.689-0.728" (17.5-18.5mm) D E R AT I N G c u R v E Method t typical results - r 1000 W/10 Sec. @ 70C 0.4% 56 Days/40C/ 95C 0.25% -55/+125/5 Cycles 0.20% 40g/4,000 Times 0.25% 2 - 500Hz/10g 0.25% Pn 30 min. ON/30 min. OFF 0.40% 200N 0.05% High Current 10% tol. only oM5 occ. Din *2.236-2.252" (56.8-57.2mm) P E R F O R M A N c E D ATA t test Short Time Overload Humidity Steady State Temp. Cycling Shock Vibrations Load Life 1,000 Cycles Terminal Strength of Contacts 2.331-2.394" (59.2-60.8mm) 0.177-0.216" (4.5-5.5mm) * Dielectric Strength up to 12KV * Special Design for Low Inductance and Capacitance Values * Contacts allow for easy load connection with M5 screws (not included) available with M4 as special request. * Encapsulated with a special resin filled epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insulation resistance (CTI 600). * Materials meet the requirements of UL94-V0 * High current version available: 0.1 to 0.2 ohms; 10% tol. Temperature Coefficient: 150ppm/C (others upon request) Maximum Working Voltage: 5,000V DC, higher voltage on request, not exceeding max. power Power Rating: 600W at 70C heat sink temperature or 85C bottom case temperature. This value is only valid by using a thermal conduction to the heat sink Rth -cs<0.025C/W. The value can be reached by using thermal transfer compound with a heat conductivity of 1w/mk. The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4m. Dielectric Strength Voltage: 6k Vrms, 50Hz, 1min standard; up to 12k Vrms available Single Shot Voltage: Up to 12KV Normwave (1.5/50 sec) Insulation Resistance: 10G min. at 500V Creeping Distance: 42mm min. Air Distance: 14mm min. Inductance: 80nH Capacitance/Mass: 110pF Capacitance/Parallel: 40pF Operation Temperature: -55C to +150C Max. Torque for Contacts: 2 Nm Max. Torque for Mounting: 1.8 Nm Derating (thermal resist.): 8.73W/C (0.115C/W) 0 S TA N D A R D vA L u E S F O R TA P 6 0 0 S E R I E S 0.10* 1.0 15 500 0.20* 2.0 30 1000 0.25 3.0 50 2500 0.33 4.0 75 3000 0.50 5.0 100 5000 10 300 10,000 *available only in HC version 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com 75