Ohmite Mfg. Co.
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
75
ORDERING INFORMATION
TAP600 Series
600 Watt Heat Sinkable Planar
Ohmite’s TAP600 delivers 600
watts of reliable power to a
variety of power conditioning,
power transmission, and power
resistors can be designed for
liquid or air cooled heat sink
systems. Applications include
variable speed drives, power
supplies, robotics, motor con
-
trol, and other control devices.
FEATURES
• Dielectric Strength up to 12KV
• Special Design for Low
Inductance and Capacitance
Values
• Contacts allow for easy load
connection with M5 screws (not
included) available with M4 as
special request.
• Encapsulated with a special resin
filled epoxy casing with a large
creepage distance to mass, large
air distance between terminals,
and a high insulation resistance
(CTI 600).
• Materials meet the requirements
of UL94-V0
• High current version available:
0.1 to 0.2 ohms; 10% tol.
SPECIFICATIONS
Electrical
Resistance Values:
0.25
Ω
to
Ω to Ω
100K
Ω
(0.1
Ω (0.1Ω
Ω
to <0.25
Ω to <0.25Ω
Ω
avail. in
Ω avail. in Ω
HC version only)
Resistance Tolerance:
±10%
Std., 5% available on request.
Temperature Coefficient:
±150ppm/°C (others upon
request)
Maximum Working Voltage:
5,000V DC, higher voltage on
request, not exceeding max.
power
Power Rating:
600W at 70°C heat
sink temperature or 85°C bottom
case temperature. This value
is only valid by using a thermal
conduction to the heat sink R
th
-cs<0.025°C/W.
The value can be reached by
using thermal transfer com
-
pound with a heat conductivity
of 1w/mk. The flatness of the
cooling plate must be better than
0.05mm overall. The roughness
of the surface should not exceed
6.4µm.
Dielectric Strength Voltage:
6k Vrms, 50Hz, 1min standard;
up to 12k Vrms available
Single Shot Voltage:
Up to 12KV
Normwave (1.5/50 µsec)
Insulation Resistance:
10G
Ω
min. at 500V
Creeping Distance:
42mm min.
Air Distance:
14mm min.
Inductance:
80nH
Capacitance/Mass:
110pF
Capacitance/Parallel:
40pF
40pF
Operation Temperature:
-55°C to +150°C
Max. Torque for Contacts:
2 Nm
Max. Torque for Mounting:
1.8
Nm
Derating (thermal resist.):
8.73W/°C (0.115°C/W)
PERFORMANcE DATA
T
est
Test T
Method
T
ypical
Typical T
R
esults -
R
R
Short Time Overload
1000 W/10 Sec. @ 70°C 0.4%
Humidity Steady State
56 Days/40°C/ 95°C
0.25%
Temp. Cycling
-55/+125/5 Cycles
0.20%
Shock
40g/4,000 Times
0.25%
Vibrations
2 - 500Hz/10g
0.25%
Load Life 1,000 Cycles
Pn 30 min. ON/30 min. OFF 0.40%
Terminal Strength of Contacts 200N
0.05%
*Also C to C
dimension for
mounting holes
LL
ø0.159–0.169"
(4.05–4.3mm)
0.689–0.728"
(17.5–18.5mm)
2.527–2.591"
(64.2–65.8mm)
1.331–1.346"
(33.8–34.2mm)
*2.236–2.252"
(56.8–57.2mm)
1.409–1.425"
(35.8–36.2mm)
2.331–2.394"
(59.2–60.8mm)
øM5
occ. Din
0.177–0.216"
(4.5–5.5mm)
1.161–1.201"
(29.5–30.5mm)
1.240–1.279"
(31.5–32.5mm)
0.571–610"
(14.5–15.5mm)
0.177–0.216"
(4.5–5.5mm)
0.295–0.335"
(7.5–8.5mm)
II
DERATING cuRvE
Percent rated power
Bottom of base plate Temperature,
°
C
02
5507
5 100 125 150 175
40
0
60
80
120
20
100
Rated power, watts
240
0
360
480
720
120
600
To
leranc
e
J = 5%
K = 10%, Std.
L
= 20%
Style
Resistance
1 Ohm = 1R0
10 Ohm = 10R
1000 Ohm = 1K0
TA
P
600
HC
K5R0
E
RoHS compliant
Non-compliant version
unavailable
High Current
10% tol. only
STANDARD v ALuES FOR TAP600 SERIES
0.10* 1.0 15 500
0.20* 2.0 30 1000
0.25 3.0 50 2500
0.33 4.0 75 3000
0.50 5.0 100 5000
10 300 10,000
*available only in HC version
Check product availability at www.ohmite.com