tyca Electronics Raychem 4441111-28 and 30 Issue 1 28th July 2004 SINGLE CORE CABLE, RADIATION CROSSLINKED POLYALKENE INSULATED, SHIELDED AND JACKETED, LIGHTWEIGHT, 150C, 600 VOLT. The complete requirements for procuring the wire described herein shall consist of this document. Shield - Tin Coated Copper, coverage 85% minimum Component wire - Jacket - 4440111- Radiation Crosslinked Modified PVF. Part Wire | Shield Jacket Thickness Overall Diameter Maximum Number Size Size (mm) (mr) Weight (mm) Min Nom Target Max (kg! km) 4441111-30-"-" 30 0.10 0.13 0.16 1.47 1.60 5.21 4441111-28-*-* 28} 0.10 0.13 0.18 1.55 1.68 5.80 CABLE PERFORMANCE DETAIL Part Mandrel Diameter (rm + 3%) Weight (kg + 3%) Number Life Cycle, Immersion, Life Cycle, Immersion and Cold Accelerated Ageing and Cold Accelerated Ageing Bend 4444111-30--* 38.4 0.06 0.68 4441111-28-*-* 44.5 0.09 0.80 COLOUR CODE: The in the part number shall be replaced by a standard colour code designator in accordance with Mil Std 681. e.g. 4441111-28-2-9, cores red, jacket white White preferred PERFORMANCE To be tested in accordance with the issue in effect of QP-D-004 and REQUIREMENTS: meet the requirements of below: Accelerated Ageing: 300 + 3C for 6 hours Blocking: 150 +3C for 6 hours Dielectric Withstand: 2.5 kV (rms) for 1 minute Flammability: 30 seconds Max, 76 mm Max. no flaming tissue. Immersion: Diameter increase 5% Max. no cracking, no dielectric breakdown Jacket Elongation and Tensile Strength: Elongation: 200% Min. Tensile Strength: 27.6 N/ mm? Min. Jacket Flaws: Spark Test: 1.5 kV (rms) 100% test Life Cycle: 200 +3C for 168 hours Low Temperature - Cold Bend: -65 +2C for 4 hours Voltage Withstand Test (Post Environmental): (After Accelerated Ageing, Immersion, Life Cycle and Low Temperature-Cold Bend} 1 kV (rms) for 1 minute f _. DESIGN PROD. MAN. TECHNICAL | MANUFACTURE on fhgman. | Qed woot] reeferlee | Le/7be_| whiou Tyco Electronics UE Lid Faraday Road Oercan SWiNOOn SN3 SHH Tel: (19S3) S210 1 Telex: 44408 Registration Number; 550926 London, Engtand This drawing and the infanmatian sat forth hareen are the property of Tyoo Electronics UK Lid, and are io be held in irust and comigence Publicalion, duplicalion, d&cheure or use for any purpage nol expressly authorised in wraing by Tyeo Electronics WK Lid prohibred This specficalion sheet lakes precedence over documents referenced herein. As Tyoo Electronics UK Lid. reserva the right bo make changes in construction wilhoul notice please eantact Theo Electronics UK Lid to ensure thal this dacumert is Ihe lalesl Beue.