Specialty Terminals 81F-156-NBL-A, 82F-156-NBL-A, Female Snap Receptacle, Bullet Style, Nylon Fully Insulated with Insulation Grip Data Sheet Specifications March 2008 Product Number Wire Range (AWG) Mating Snap Diameter S 81F-156-NBL-A 22 - 18 0.156 .99 .15 82F-156-NBL-A 16 - 14 0.156 .99 .19 Wire Size: Barrel Seam: Maximum Voltage Rating: Maximum Operating Temp: Maximum Current: Insulator Material Terminal Material: Terminal Plating: L Maximum Insulation Diameter See Table Above Butted with insulation Grip 300 V Building Wire 221F (105C) Same as Wire Nylon Brass Tin Installation Information Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3MTM ScotchlokTM Crimp Tool: TH-440, TH-450. Barrel Crimp (Electrical) Insulation Crimp (Mechanical) 1 of 2 Engineering Specification Crimp-Type Female Disconnects shall, electrically and mechanically, connect permanently to a pre-stripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer tongue variations (sized to grip bullet-style Male Tabs 0.156" diameter per ANSI/NEMA CD-2) and barrel variations in wire (AWG) size (22-18, 16-4) and construction (vinyl insulated, nylon fully insulated, etc.). Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M and Scotchlok are trademarks of 3M Company. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329 www.3M.com/electrical Please recycle. (c) 3M 2008 All rights reserved. 78-8127-6867-5_A 2 of 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 81F-156-NBL-A