Microwave Components Chip Multilayer Hybrid Couplers Hybrid Dividers 1.60.1 0.60.1 2.000.10 0.80.1 0.30.1 0.500.05 (1) Directional Input Mark (4) (1)(3)(5) (2) (4) (6) (5) (6) 0.300.10 0.350.10 0.20 0.650.05 0.10 : GND : IN : OUT1 : OUT2 (in mm) LDD21 Series (1) GND (2) IN (3) GND (4) OUT1 (5) GND (6) OUT2 (in mm) 100ohm external resister is required between Out 1 and Out 2. All the technical data and information contained herein are subject to change without prior notice. 100 external resister is required between OUT1 and OUT2 All the technical data and information contained herein are subject to change without prior notice. Frequency Range (MHz) Insertion Loss (OUT1,OUT2) (dB) Isolation (min.) (dB) VSWR (max.) LDD18713M03A-164 713.0 38.0MHz 3.5 0.4dB 17.0 1.6 LDD211G6103A-095 1619.0 12.0MHz 3.4 0.4dB 17.0 1.5 LDD211G6603A-096 1660.0 13.5MHz 3.4 0.4dB 20.0 1.5 LDD211G7503A-067 1750.0 30.0MHz 3.4 0.4dB 20.0 1.5 LDD212G1403A-075 2140.0 30.0MHz 3.4 0.4dB 22.0 1.5 LDD21718M03A-060 718.5 38.0MHz 3.4 0.4dB 17.0 1.5 LDD21740M03A-077 740.0 19.0MHz 3.4 0.4dB 20.0 1.5 LDD21967M03A-068 967.0 13.0MHz 3.4 0.4dB 20.0 1.5 Part Number Characteristics Impedance (Nominal): 50ohm Operating Temperature Range: -40C to +85C Microwave Components LDD18 Series (6) 0.150.10 0.20+0.10/-0.15 0.20.1 (5) (2) 1.250.10 (3) Directional Input Mark (4) 0.950.10 (1) +0.1 (2) 0.30 -0.2 (3) 8 !Note * This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. * This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 07.06.20