|||||| | | | | | | | | |
ABLS3
APPLICATIONS:
FEATURES:
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
STANDARD SPECIFICATIONS:
• Computers, Modems, Microprocessors
• Wireless Applications
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com
Revised: 07.05.11
Visit www.abracon.com for Terms & Conditions of Sale
• Suitable for RoHS compliant reflow
• Low height reduced to 2.5/2.6mm
•Tight stability & extended temperature options
TABLE 1: ESR
FREQUENCY (MHz)
ESR (Ω)
3.579545 - 4.999 (Fund.) 180
5.000 - 5.999 (Fund.)
120
6.000 - 7.999 (Fund.) 100
8.000 - 8.999 (Fund.)
80
9.000 - 9.999 (Fund.) 60
10.000 - 15.999 (Fund.)
50
16.000 - 50.000 (Fund.) 40
24.01 - 31.999 (3rd O/T)
100
32.000 - 70.00 (3rd O/T) 80
Parameters Minimum Typical Maximum Units Notes
Frequency Range
3.579545 ----- 24.000000
MHz
Fundamental AT
(Standard)
24.000001 ----- 50.000000
Fundamental AT or BT
(See options)
24.000001 ----- 70.000000
3rd Overtone
(Standard)
Operation Mode Fundamental or 3
rd
Overtone
Operating Temperature 0 ----- +70 ºC See options
Storage Temperature -55 ----- +125 ºC
Frequency Tolerance @+25°C -50 ----- +50 ppm See options
Frequency Stability over the Operating
Temperature ( ref. to +25°C) -50 ----- +50 ppm
See options
(For BT cut, ±100ppm max.at
-10° C to +60° C only)
Equivalent series resistance (R1) See table 1 below Ω
Shunt capacitance (C0) ----- ----- 7 pF
Load capacitance (CL) ----- 18 ----- pF
Standard
(See options if
other than STD)
Drive Level ----- 100 1000 µW
Aging -5 ----- +5 ppm @25°C±3°C
First year
Insulation Resistance 500 ----- ----- MΩ @ 100Vdc ± 15V
Drive level dependency (DLD)
Minimum 7 points tested: from 1µW to 500µW.
Change in frequency (Maximum - Minimum) over DLD range < ±10ppm
Change in ESR (Maximum - Minimum) over DLD range < 25% of Max ESR
value.
Maximum ESR over DLD range < Max ESR value.
11.4 x 4.7 x 2.5/2.6mm
HC49/US (AT49) LOW PROFILE SMD
MICROPROCESSOR CRYSTAL
to 2.5mm
Reduced height
to 2.5/2.6mm
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and
not Moisture Sensitive - MSL = N/A: Not Applicable
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
||||||||| | | | | | |
ABLS3
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com
Revised: 07.05.11
Visit www.abracon.com for Terms & Conditions of Sale
11.4 x 4.7 x 2.5/2.6mm
HC49/US (AT49) LOW PROFILE SMD
MICROPROCESSOR CRYSTAL
ABLS3 - MHz - - - - -
Frequency in MHz
Please specify the frequency
in MHz. e.g. 14.31818MHz
Packaging
Blank: Bulk
T: Tape & Reel
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
Oscillation Mode
F: Fund. AT>24MHz
FB: Fund. BT>24MHz
Freq. Stability
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
R: ± 150 ppm
Custom ESR if other
than standard
R
: Specify a value in Ω
(e.g.: R40)
Freq. Tolerance
H5: ± 5 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J*: -40°C ~ +105°C
K*: -40°C ~ +125°C
L*: -55°C ~ +125°C
NOTE: Fundamental BT frequency stability ± 100ppm max. at -10° C to +60° C only.
* Frequency stability ±50ppm, ±100ppm, ±150ppm only.
** -10 to +60C only.
Contact ABRACON for tighter frequency stability.
to 2.5mm
Reduced height
to 2.5/2.6mm
ISO 9001:2008
|||||||||| | | | | |
ABLS3
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | w ww.abracon.com
Revised: 07.05.11
Visit www.abracon.com for Terms & Conditions of Sale
11.4 x 4.7 x 2.5/2.6mm
HC49/US (AT49) LOW PROFILE SMD
MICROPROCESSOR CRYSTAL
to 2.5mm
Reduced height
to 2.5/2.6mm
Dimensions: inches (mm)
H: 2.5mm max for frequency 6MHz or higher
2.6mm max for frequency lower than 6MHz
OUTLINE DRAWING:
REFLOW PROFILE:
TAPE & REEL:
T = tape and reel (1000pcs/reel)
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
