Preliminary Data Sheet August 1998 LUCDA4044 Phase Frequency Detector Features Applications Typical propagation delay 9.0 ns (through phase detector) Includes charge pump and amplifier Available in 14-pin DIP or SONB R 1 D1 2 V 3 13 U1 PU 4 UF 5 D2 6 9 AIN GND 7 8 AOU CHARGE PUMP Clock recovery The LUCDA4044 consists of two digital phase detectors, a charge pump, and an amplifier. In combination with a voltage-controlled multivibrator, this device is useful in a broad range of phase-locked loop (PLL) applications. The circuit accepts TTL waveforms at the R and V inputs and generates an error voltage that is proportional to frequency and/or phase difference. 12 U2 PHASE FREQUENCY DETECTOR #2 Frequency synthesizers Description 14 VCC PHASE FREQUENCY DETECTOR #1 11 PD 10 DF 12-3519F Figure 1. Functional Diagram Phase detector #1 is intended for use in systems requiring zero frequency and phase at lock. Phase detector #2 is used if quadrature lock is desired. Phase detector #2 can also be used to indicate that the main loop (utilizing phase detector #1) is out of lock. This LUCDA4044 is a direct replacement for the Motorola(R) MC4044. Preliminary Data Sheet August 1998 LUCDA4044 Phase Frequency Detector Pin Information Absolute Maximum Ratings R 1 14 VCC D1 2 13 U1 V 3 12 U2 PU 4 11 PD UF 5 10 DF D2 6 9 AIN GND 7 8 AOU Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Ambient Operating Temperature Storage Temperature Range Power Supply Voltage (VCC to GND) Symbol -- Value -40 to +85 Unit C Tstg -40 to +125 C -- 7.0 V 12-3518F Figure 2. Pin Diagram Table 1. Pin Descriptions Symbol Pin Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R D1 V PU UF D2 GND AOU AIN DF PD U2 U1 VCC Common Reference Signal Input Detector #1 Output Common Variable Signal Input Diode Cathode Diode Anode Detector #2 Output Power Supply Ground Amplifier Output Amplifier Input Charge Pump Output Charge Pump Input Detector #2 Output Detector #1 Output Positive Power Supply Truth Table This table is not strictly a functional truth table; i.e., it does not show all possible modes of operation. It is included as an aid for dc testing. Table 2. Truth Table Input State 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Input R V 0 0 1 0 1 1 1 0 0 0 1 0 0 0 1 0 0 0 0 1 0 0 0 1 0 0 0 1 0 0 1 0 0 0 U1 x x x x x x 0 0 0 0 1 1 1 1 1 1 1 Output D1 U2 x 1 x 0 x 1 x 0 x 1 x 0 1 1 1 0 1 1 1 1 1 1 1 1 0 1 0 1 0 1 0 0 1 1 D2 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Notes: x indicates output state unknown. U1 and D1 outputs are sequential, i.e., they must be sequenced in the order shown. U2 and D2 outputs are combinational, i.e., they need only inputs to obtain the desired output state. 2 Agere Systems Inc. Preliminary Data Sheet August 1998 LUCDA4044 Phase Frequency Detector Electrical Characteristics Table 3. Electrical Characteristics (at 25 C) Parameter Output Voltage High (pins 2, 6, 12, 13) Symbol VOH Output Voltage Low (pins 2, 6, 12, 13) VOL Input Voltage High (pins 1, 3, 11) Input Voltage Low (pins 1, 3, 11) Input Current Low #1 (pins 1 and 3) VIH VIL IIL1 Input Current Low #2 (pin 11) IIL2 Input Current High #1 (pins 1 and 3) IIH1 Input Current High #2 (pin 11) IIH2 Input Current High (pins 1, 3, 11) IIHH Clamp Voltage (pins 1, 3, 11) Vclamp Output Current (pins 2, 6, 12, 13) IOS Forward Diode Voltage (pin 5) VDF Reverse Diode Voltage (pin 4) VDR Output Voltage High (pin 10) VOH Output Voltage Low (pin 10) VOL Output Current (pin 8) IOLK Output Current (pin 8) IO Test Conditions IOH = -1.6 mA VCC = 4.75 V IOL = 16 mA VCC = 4.75 V VCC = 4.75 V VCC = 4.75 V VIL = 0.4 V VCC = 5.25 V VIL = 0.4 V VCC = 5.25 V VIH = 2.4 V VCC = 5.25 V VIH = 2.4 V VCC = 5.25 V VIH = 5.25 V VCC = 5.25 V IIN = -18 mA VCC = 4.75 V VOL = 0 V* VCC = 5.25 V IIN = 1 mA VCC = 5.25 V IIN = 5 A VCC = 5.25 V IOH = -1 mA VCC = 4.75 V IOL = 100 A VCC = 4.75 V VA = 0 V VCC = 5.25 V IA = 10 A VCC = 5.25 V Min 2.4 Typ -- Max -- Unit V -- -- 0.4 V 2.0 -- -- -- -- -- -- 0.8 -2.4 V V mA -- -- -0.8 mA -- -- 120 A -- -- 40 A -- -- 1.0 mA -- -- -1.5 V -30 -- -85 mA 0.4 -- 1.0 V 5.25 -- -- V 2.5 -- -- V -- 0 V -- 120 A -- -- mA 5.25 * Pins 2 and 13 are prone to change state; care must be taken during testing. Agere Systems Inc. 3 Preliminary Data Sheet August 1998 LUCDA4044 Phase Frequency Detector Outline Diagrams 14-Pin SONB Dimensions are in millimeters. L N B 1 PIN #1 IDENTIFIER ZONE W H SEATING PLANE 0.10 0.51 MAX 1.27 TYP 0.61 0.28 MAX 5-4414F 4 Package Description Number of Pins "N" SONB (Small Outline Narrow Body) 14 Maximum Length "L" 8.84 Package Dimensions Maximum Width Maximum Width Without Leads Including Leads "W" "B" 4.01 6.17 Maximum Height Above Board "H" 1.73 Agere Systems Inc. Preliminary Data Sheet August 1998 LUCDA4044 Phase Frequency Detector Outline Diagrams (continued) 14-Pin DIP Dimensions are in millimeters. L N B 1 W PIN #1 IDENTIFIER ZONE H SEATING PLANE 0.38 MIN 2.54 TYP 0.58 MAX 5-4410F Package Description PDIP3 (Plastic Dual Inline Package) (0.300" Series) Agere Systems Inc. Number of Pins "N" 14 Maximum Length "L" 20.57 Package Dimensions Maximum Maximum Width Maximum Width Including Leads Height Above Without Leads Board "H" "W" "B" 6.47 7.87 5.08 5 LUCDA4044 Phase Frequency Detector Preliminary Data Sheet August 1998 Ordering Information Device Code LUCDA4044AAFE LUCDA4044AAFE-TR LUCDA4044AAPE Package 14-Pin SONB 14-Pin SONB Tape and Reel 14-Pin DIP Operating Temperature -40 to +85 -40 to +85 -40 to +85 Comcode 108158403 108158411 108158429 Motorola is a registered trademark of Motorola Inc. For additional information, contact your Agere Systems Account Manager or the following: INTERNET: http://www.agere.com E-MAIL: docmaster@agere.com N. AMERICA: Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286 1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106) ASIA: Agere Systems Hong Kong Ltd., Suites 3201 & 3210-12, 32/F, Tower 2, The Gateway, Harbour City, Kowloon Tel. (852) 3129-2000, FAX (852) 3129-2020 CHINA: (86) 21-5047-1212 (Shanghai), (86) 10-6522-5566 (Beijing), (86) 755-695-7224 (Shenzhen) JAPAN: (81) 3-5421-1600 (Tokyo), KOREA: (82) 2-767-1850 (Seoul), SINGAPORE: (65) 778-8833, TAIWAN: (886) 2-2725-5858 (Taipei) EUROPE: Tel. (44) 7000 624624, FAX (44) 1344 488 045 Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. Copyright (c) 2002 Agere Systems Inc. All Rights Reserved August 1998 DS98-390LEG