16
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Ceramic Resonators (CERALOCKr)
MHz Chip Type -Tight Frequency Tolerance for General Usage-
Chip type "CERALOCK" with built-in load capacitors in
an extremely small package provides high accuracy.
MURATA's frequency adjustment and package technology
expertise has enabled the development of the chip
"CERALOCK" with built-in load capacitors.
High-density mounting can be realized because of the
small package and the elimination of the need for an
external load capacitor.
■ Features
1. High accuracy resonator realizes initial tolerance
of +-250ppm.
2. Oscillation circuits do not require external load
capacitors.
3. The series is available in a wide frequency range.
4. The resonators are extremely small and have a low
profile.
5. No adjustment is necessary for oscillation circuits.
■ Applications
1. Clock oscillators for USB (High-speed and Full-speed)
controller ICs
2. Storage devices with SATA interface
(HDD, Optical storage device, etc.)
3. Audio equipment and musical instrument, etc.
4. Other applications for replacement from Crystal
Oscillators
4.5±0.1
∗
4.1 max.
0.8±0.1
0.75±0.1 1.5±0.1 1.5±0.1
0.4±0.1 0.4±0.1 0.4±0.1
0.8±0.1 0.8±0.1
0.4 (ref.)0.4 (ref.)0.4 (ref.)
0.4±0.05
0.2±0.2
0.3±0.2
2.0±0.1
1.4 max.
(2) (1)(3)
1.15±0.05
∗ : EIAJ Monthly
Code
(in mm)
CSTCR_G15L
4.00-7.99MHz
3.2±0.15
1.3±0.15
0.50 (ref.) 0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
0.70±0.10
0.4±0.1 0.4±0.1
(in mm)
∗
CSTCE_G15L
8.00-13.99MHz
3.2±0.15
0.10±0.10
0.1±0.1
1.3±0.15
1.1 max.
0.4±0.1
0.5 (ref.) 0.5 (ref.)
0.9±0.1
3.0 max.
0.4±0.1 (1)(2)(3)
0.4±0.1 1.2±0.1 1.2±0.1
0.4±0.10.4±0.1
0.5 (ref.)
(in mm)
∗: EIAJ Monthly
Code
∗
CSTCE_V13L
14.00-20.00MHz
3.2±0.15
1.3±0.15
0.50 (ref.) 0.50 (ref.)
0.50 (ref.)
3.0 max.
0.10±0.10
0.4±0.1
0.4±0.1 1.2±0.1 1.2±0.1
(1)(2)(3)
0.1±0.1
1.1 max.
0.4±0.1
1.00±0.10
0.4±0.1 0.4±0.1
(in mm)
∗
CSTCE_XK, CSTCE_XT
24.00-27.20/30.00MHz
2.5T0.2 1.4 max.
Thickness varies
with frequency and
built-in capacitance.
*: EIAJ code
0.5T0.2 0.5T0.2
0.5T0.2
1.0T0.21.0T0.2
1.25T0.2
(0.5)
(3) (0.5)
(1)
(0.5)
(2)
0.05+0.10
-
0.05 0.05+0.10
-
0.05
0.4 +0.3
-
0.2
0.4 +0.3
-
0.2
0.4 +0.3
-
0.2
*
2.0T0.2
(in mm)
CSTCW_X11
20.01-29.99MHz
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P16E.pdf
08.3.3
17
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
2.00T0.05 0.75T0.10
(0.45)(0.45)
(0.60)
(3) (1)(2)
1.60T0.05
(in mm)
0.3+0.20
-0.15
0.3+0.20
-0.15
0.3+0.20
-0.15
*
0.78T0.20
1.00T0.20
0.43T0.10 0.55T0.10 0.43T0.10
0.78T0.20
Thickness varies
with frequency and
built-in capacitance.
*: EIAJ code
CSTCZ_X12R
30.00-48.00MHz
Part Number Oscillating
Frequency
(MHz)
Initial
Tolerance Temp. Stability
(%)
Temperature
Range
(°C)
CSTCR_G15L 4.00 to 7.99 ±0.1% ±0.08 0 to 70
CSTCE_G15L 8.00 to 13.99 ±0.1% ±0.08 0 to 70
CSTCE_V13L 14.00 to 20.00 ±0.1% ±0.08 0 to 70
CSTCW_X11 20.01 to 29.99 ±0.1% ±0.1 0 to 70
CSTCE_XK 24.00 to 27.20
/30.00 +0.02
/-0.025% ±0.015 0 to 70
CSTCE_XT 24.00 to 27.20
/30.00 ±0.027% ±0.015 0 to 70
CSTCZ_X12R 30.00 to 48.00 ±0.15% ±0.05
[0 to 70°C:±0.03%] -30 to 85
CSTCE_XK: Available Frequency is 24.00 to 27.20MHz and 30.00MHz.
CSTCE_XT: Initial tol. Includes freq. aging. Please contact us in case temp. range exceeds 0 to 70 degrees C.
Irregular or stop oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use.
■ Oscillation Frequency Measuring Circuit
CSTCR_G15/CSTCE_G15L/CSTCE_V13L
VDD
Rf To Frequency Counter
5pF
1MΩ
Rd
C1 C2
(1) (3)
(2)
CSTCE_XK, CSTCE_XT
Rf
VDD
C1 C2
To Frequency Counter
(1) (3)
(2)
Continued on the following page.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P16E.pdf
08.3.3
18
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
■ Oscillation Frequency Measuring Circuit
CSTCW_X11
Rf
Rd
VDD
C1 C2
To Frequency counter
(1) (3)
(2)
CSTCZ_X12R
Rf
VDD
C1 C2
To Frequency Counter
(1) (3)
(2)
■ Standard Land Pattern Dimensions
CSTCR_G15L
2.6
0.4
1.5 1.5
1.1
0.4 0.41.1
Land Pattern
(in mm)
CSTCE_G15L
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTCE_V13L
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTCE_XK, CSTCE_XT
0.4
1.90 ~ 2.10
0.4 0.40.8
Land Pattern
0.8
1.2 1.2
(in mm)
CSTCW_X11
0.5 0.50.50.5
1.0 1.0
0.80.8
2.0T0.2
0.30.3
0.5
Land Pattern
(in mm)
CSTCZ_X12R
0.3
2.0
1.6
0.3 0.30.650.65
0.95 0.95
(in mm)
Land Pattern
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P16E.pdf
08.3.3
19
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ Oscillation Frequency Temperature Stability
CSTCR_G15L
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCE_G15L
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+0.2
+0.1
0
-0.1
-0.2
CSTCE_V13L
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
+0.2
+0.1
0
-0.1
-0.2
Temperature (°C)
CSTCE_XK, CSTCE_XT
-60 -40 -20 0 +20 +40 +60 +80 +100 +120 +140
Oscillating Frequency Shift (%)
Temperature (°C)
+1000
+500
0
-500
-1000
CSTCW_X11
Oscillating Frequency Shift (%)
Temperature (°C)
-40 -20 0 +20 +40 +60 +80 +100
+0.2
+0.1
0
-0.1
-0.2
CSTCZ_X12R
Oscillating Frequency Shift (%)
Temperature (°C)
-40 -20 0 +20 +40 +60 +80 +100
+0.2
+0.1
0
-0.1
-0.2
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P16E.pdf
08.3.3
Application Circuits Utilization
20
3
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ M66291GP (Renesas)
USB Transceiver
14 13 GND
EVALUATION BOARD
IC : M66291GP
Vset=3.3V
CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V1
220Ω
1MΩ
CERALOCKr
C1C2
V2
■ MN102HF74GHL (Panasonic)
16-bit Microcontroller
H 82 18
Fout
23 24 L
IC : MN102HF74GHL
Vdd=3.3V
H: 1~17, 22, 25, 26~42, 54, 58~60, 66~81, 83~91
L: 19, 20, 43~53, 55~57, 61~65, 82, 92~100
CERALOCKr
C1C2CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
V2V1
■ LC87F1964A (Sanyo)
8-bit Microcontroller
6 7 LL1
IC : LC87F1964A
Vdd=5.0V
CERALOCKr: CSTCE12M0G15Lpp-R0
C1=33pF (Typ.)
C2=33pF (Typ.)
H H1
V2V1
470Ω
CERALOCKr
C1C2
H: 8, 19, 39
L: 5, 20, 40
H1: 31, 33
L1: 29, 30, 32, 34~36
10kΩ
10kΩ
■ TUSB2046B (Texas Insturuments)
USB 4-port HUB
H
30 29 GND
IC : TUSB2046B
Vcc=3.3V
CERALOCKr
C1C2CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
1MΩ
H: 3, 25
L: 7, 28
■ ISP1181BDGG (Philips)
USB Controller
H
48 47 GND
EVALUATION BOARD
IC : ISP1181BDGG
Vset=3.3V
CERALOCKr
C1C2CERALOCKr: CSTCR6M00G15ppp-R0
C1=39pF (Typ.)
C2=39pF (Typ.)
V2V1
■ uPD720114 (NEC Electronics)
USB2.0 (Hi-speed) HUB Controller
VDD
10 11 GND
IC : µPD720114
Vdd=3.3V
CERALOCKr
C1C2CERALOCKr: CSTCE30M0XK1ppp-R0
C1=5pF (Typ.)
C2=5pF (Typ.)
V2V1
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note P16E.pdf
08.3.3
