Hyper CHIPLED Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS Q976, LO Q976, LY Q976 Released Besondere Merkmale Features * Gehausetyp: 0603, farbloser diffuser Verguss * Besonderheit des Bauteils: kleinste Bauform 1,6 mm x 0,8 mm x 0,8 mm * Wellenlange: 633 nm (super-rot), 605 nm (orange), 587 nm (gelb) * Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160) * Technologie: InGaAlP * optischer Wirkungsgrad: 7 lm/W (super-rot), 11 lm/W (orange, gelb) * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 4000/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B * Erweiterte Korrosionsfestigkeit: Details siehe Seite 10 * package: 0603, colorless diffused resin * feature of the device: smallest package 1.6 mm x 0.8 mm x 0.8 mm * wavelength: 633 nm (super-red), 605 nm (orange), 587 nm (yellow) * viewing angle: extremely wide (160) * technology: InGaAlP * optical efficiency: 7 lm/W (super-red), 11 lm/W (orange, yellow) * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 4000/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B * Superior Corrosion Robustness: details see page 10 Anwendungen Applications * Informationsanzeigen im Auenbereich * Flache Hinterleuchtung (LCD, Handy, Schalter, Display) * Signal- und Symbolleuchten * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * outdoor displays * flat backlighting (LCD, cellular phones, switches, displays) * signal and symbol luminaire * marker lights (e.g. steps, exit ways, etc.) 2010-03-01 1 LS Q976, LO Q976, LY Q976 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Bestellnummer Type Color of Emission Luminous Intensity1) page 16 Luminous Flux2) page 16 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) Ordering Code LS Q976-NR-1 super-red 28 ... 180 330 (typ.) Q62702P5187 LO Q976-PS-25 orange 45 ... 280 520 (typ.) Q62702P5188 LY Q976-P1S2-36 yellow 45 ... 280 520 (typ.) Q62702P5276 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LY Q976-P1S2-36 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen P1, P2, Q1, Q2, R1, R2, S1 oder S2 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LY Q976-P1S2-36 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, -5 oder -6 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LS Q976-NR-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LY Q976-P1S2-36 means that only one group P1, P2, Q1, Q2, R1, R2, S1 or S2 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LY Q976-P1S2-36 means that only 1 wavelength group -3, -4, -5 or -6 will be shippable (see page 5 for explanation). E.g. LS Q976-NR-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2010-03-01 2 LS Q976, LO Q976, LY Q976 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 30 ... + 85 C Lagertemperatur Storage temperature range Tstg - 40 ... + 85 C Sperrschichttemperatur Junction temperature Tj + 95 C Durchlassstrom Forward current (TA=25C) IF 25 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 0.1 A Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 65 mW Rth JA 900 K/W Rth JS 510 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/solder point 2010-03-01 3 LS Q976, LO Q976, LY Q976 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 20 mA Werte Values Einheit Unit LS LO LY peak 645 610 591 nm dom 633 6 605* 6 587* nm -4/+8 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 160 160 160 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 20 mA (typ.) (max.) VF VF 2.0 2.5 2.0 2.5 2.0 2.5 V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 100 0.01 100 0.01 100 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 11 11 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2010-03-01 4 LS Q976, LO Q976, LY Q976 Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Gruppe Group gelb yellow min. orange orange max. 2 Einheit Unit min. max. 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 609 612 nm 6 592 595 nm Helligkeits-Gruppierungsschema (super rot, orange) Brightness Groups (super red, orange) Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) N P Q R S 28 ... 45 45 ... 71 71 ... 112 112 ... 180 180 ... 280 Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 115 (typ.) 180 (typ.) 280 (typ.) 450 (typ.) 715 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. 2010-03-01 5 LS Q976, LO Q976, LY Q976 Helligkeits-Gruppierungsschema (gelb) Brightness Groups (yellow) Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) P1 P2 Q1 Q2 R1 R2 S1 S2 45 ... 56 ... 71 ... 90 ... 112 ... 140 ... 180 ... 224 ... 56 71 90 112 140 180 224 280 Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 160 (typ.) 200 (typ.) 255 (typ.) 325 (typ.) 405 (typ.) 510 (typ.) 645 (typ.) 805 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 8 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 8 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: Q2-4 Example: Q2-4 Helligkeitsgruppe Brightness Groups Wellenlange (gelb) Wavelength (yellow) Q2 4 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2010-03-01 6 LS Q976, LO Q976, LY Q976 Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00555 100 % rel orange super-red 80 V yellow 60 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL00408 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2010-03-01 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LS Q976, LO Q976, LY Q976 Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 16 Relative Luminous Intensity2) 7) page 16 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL00556 10 1 IV I V (20 mA) IF 10 0 10 1 5 5 super-red 10 -1 5 10 yellow, orange 0 10 -2 5 5 10 -1 1 1.4 1.8 2.2 2.6 10 -3 10 3 V 3.4 -1 0 5 10 5 10 1 mA 10 VF 2 IF 2) Seite 16 Relative Lichtstarke Relative Luminous Intensity2) IV/IV(25 C) = f (Tj); IF =20 mA page 16 OHL02378 2.0 IV I V (25 C) 1.6 orange yellow super-red 1.2 0.8 orange yellow super-red 0.4 0 -20 0 20 40 60 C 100 Tj 2010-03-01 8 LS Q976, LO Q976, LY Q976 Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) OHL00873 30 I F mA 25 20 TS 15 TA 10 5 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 C 100 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C OHL02140 0.12 IF A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C t D = TP OHL02147 0.12 tP IF IF A T tP tP D= T IF T D= 0.08 0.06 0.04 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.08 0.06 0.04 0.02 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.02 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2010-03-01 D= tp 9 LS Q976, LO Q976, LY Q976 Mazeichnung8) Seite 16 Package Outlines8) page 16 0.9 (0.035) 0.7 (0.028) 1.1 (0.043) 0.9 (0.035) 0.7 (0.028) 0.5 (0.020) C 0.9 (0.035) 0.7 (0.028) Cathode mark 0.4 (0.016) 0.2 (0.008) Cathode mark 1.7 (0.067) 1.5 (0.059) o0.5 (o0.020) o0.3 (o0.012) 0.9 (0.035) 0.7 (0.028) 0.4 (0.016) 0.2 (0.008) A Soldering terminal may flow in x, y direction GEOY6989 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Gewicht / Approx. weight: 1.4 mg Gurtung / Polaritat und Lage8) Seite 16 1.5 (0.059) +0.1 (0.004) 2 (0.079) 0.05 (0.002) 8 (0.315) 0.2 (0.008) 0.2 (0.008) 0.05 (0.002) 3.5 (0.138) 0.05 (0.002) 4 (0.157) 0.1 (0.004) 1.8 (0.071) 0.1 (0.004) Method of Taping / Polarity and Orientation8) page 16 1.75 (0.069) 0.1 (0.004) Verpackungseinheit: 4 Rollen mit 4000/Rolle, 8 mm Gurt, o180 mm Packing unit: 4 reels with 4000/reel, 8 mm tape, o180 mm C A 0.95 (0.037) 0.1 (0.004) 0.75 (0.030) 0.1 (0.004) 2010-03-01 4 (0.157) 0.1 (0.004) 10 OHAY1539 LS Q976, LO Q976, LY Q976 Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 IR Reflow Loten IR Reflow Soldering OHAPY606 0.35 (0.014) 0.8 (0.031) 2.25 (0.089) 0.225 (0.009) Empfohlenes Lotpaddesign verwendbar fur Hyper CHIPLED und Chipled - Bauform 0603 IR Reflow Loten8) 9) Seite 16 Recommended Solder Pad useable for Hyper CHIPLED and Chipled - Package 0603 IR Reflow Soldering8) 9) page 16 0.3 (0.012) 0.5 (0.020) 0.65 (0.026) OHPY0203 2010-03-01 11 LS Q976, LO Q976, LY Q976 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil IR Reflow Soldering Profile (nach IPC 9501) (acc. to IPC 9501) OHLA0685 250 Tmax = 245 C C T 200 t = 70 s T = 183 C 150 2-3 K/s 100 2-3 K/s 50 0 0:00 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 min 5:30 t IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T (nach J-STD-020B) (acc. to J-STD-020B) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 t 2010-03-01 12 s 300 LS Q976, LO Q976, LY Q976 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: Sa m pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code (1T) LOT NO: Lot Number Additional TEXT (9D) D/C: Date Code R077 Bar Code (X) PROD NO: Product Code DEMY PACKVAR: Packing Type (Q)QTY: Product Quantity per Reel (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A 180 (7) 2010-03-01 W Nmin W1 W2 max 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 13 LS Q976, LO Q976, LY Q976 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials S to p rs O cto M u A d R o n O: S ic N O em H (6 P ) B A TC (1 T) 2100 LO T N 2199 8 O (X ) P R O D N O : 34 12 H G 23 :1 (9 D D /C Y 6 B Bin Tem 0 C R T M C R E 67 T ED ML 22 240 C XT D 0 Y L 2 26 al TE S P 2a 18 L O on R -1 3 iti : iT Q R dd lt + A 7 VA u 07 -1 R CK M P ) 110 0 14 2 5 (Q 4 14 :0 Muster )Q : 0 -2 0 -1 P -1-2 1: Q T in S B in2: p R 3: TY 00 20 P A (G ) G R O U P : OHA02624 2010-03-01 14 LS Q976, LO Q976, LY Q976 Revision History: 2010-03-01 Previous Version: 2007-07-16 Page Subjects (major changes since last revision) Date of change 4 value (wavelength yellow) 11 recommended solder pad 2 color of the light emitting area 3 pad size from 16 mm2 to 5 mm2 13 annotations 2002-07-25 4 value (TCdom from 0.01 to 0.05 nm/K) 2002-07-25 3, 4 value (reverse voltage from 5 V to 12 V) 2002-09-18 2 ordering code 2002-09-19 3 ambient temperature 2003-09-09 5 Wavelength groups for dominant wavelength 2003-09-26 all new template 2003-10-29 8 Permissible Pulse Handling Capability 2004-01-22 1 RoHS compliant 2004-04-20 1 ESD-withstand voltage 2004-08-30 12 Product Label acc. to OS-IN-2005-015 2005-05-18 2 Brightness groups completed in ordering table 2007-07-16 5, 6 Brightness groups table for full bins completed 2007-07-16 1, 10 additional information 2010-03-01 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 16 may only be used in life-support devices or systems11) page 16 with the express written approval of OSRAM OS. 2010-03-01 15 LS Q976, LO Q976, LY Q976 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 5 mm2 je Pad) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Mae werden wie folgt angegeben: mm (inch) 9) Empfohlene Lotpastendicke: 120 m 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2010-03-01 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). Recommended thickness of solder paste: 120 m A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 16 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 5 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.