856140 310.7 MHz SAW Filter Applications General Purpose For IF applications Product Features Functional Block Diagram Top view Gnd Usable bandwidth 3 MHz Low loss High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Dimensions: 5.0 x 5.0 x 1.3mm Hermetic RoHS compliant, Pb-free Pb 8 7 Gnd 2 6 Output 3 5 Gnd Gnd 1 Input Gnd 4 Gnd General Description Pin Configuration The 856140 is a high-performance IF SAW filter with a center frequency of 310.7 MHz and a usable bandwidth of 3 MHz. It features low loss with excellent attenuation, and is designed to be used with a single ended input and output. Pin # Single-end Description 2 6 1,3,4,5,7,8 Input Output Case Ground Ordering Information The device is RoHS compliant and Pb-free. Part No. Description 856140 856140-EVB packaged part evaluation board Standard T/R size = 4000 units/reel. Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856140 310.7 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +95 C Parameter (3) Center Frequency Insertion Loss Lower 25dB Band Edge (5) Upper 25dB Band Edge (5) Rejection (5) Min Typical (4) Max Units 295 - 310.7 3.0 304.9 317.1 6.5 325 MHz dB MHz MHz 100 - 295 MHz 289.9 - 301.5 MHz 319.9 - 325 MHz 325 - 500 MHz 25 20 20 25 59.0 48.5 46.0 67.0 - dB dB dB dB 289.3 MHz 305.35 MHz 309.2 - 312.2 MHz 42 4 - 62.0 18.8 0.1 50 50 0.3 - dB dB dB p-p Conditions at 310.7 MHz Attenuation (5) Gaussian Ripple Source Impedance (single-ended) (6) Load Impedance (single-ended) (6) Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Relative to insertion loss at center frequency 6. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature Storage Temperature Input Power(7) -30 to +95 oC -40 to +85 oC +9dBm 7. Device is measured for equivalent 10K hours @ +55 C [CW Signal] Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856140 310.7 MHz SAW Filter Reference Design Schematic 2 50 Single-ended Input 50 6 1,3,4,5,7,8 50 Single-ended Output 50 Notes: 1. Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 5.20 2.28 1.47 8 JJJYM .84 .71 960700 .43 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick .84 1.47 Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number SMA PCB N/A N/A SMA connector 3-layer Radiall USA Inc. multiple 9602-1111-018 960700 Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856140 310.7 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856140 310.7 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Sawtek logo Package Style: SMP-20A Dimensions: 5.00 x 5.00 x 1.32 mm Marking code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating 8 JJJYM ID dot All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm Date code The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 0.66 1.32 NOM. 1.52 MAX. 5.00 1.27 5.00 1.27 2.08 0.64 Tape and Reel Information Standard T/R size = 4000 units/reel. All dimensions are in millimeters 2.7 Sawtek logo 12.8 O330 Section A-A ID dot 4.0 0.3 2.0 O1.5 A 1.75 5.5 O102 O20.2 O13.0 2.0 Direction of travel 5.25 1.8 Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - 5.25 8.0 O1.5 12.0 A Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856140 310.7 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1B Value: Passes 700 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: B Value: Passes 200V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev - 5/06/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)