ELD Screw Terminal Edgecard Connector .200 The .200" spacing Electrocon ELD features selectively gold-plated Consistent, reliable connections are provided even after repeated cantilever beam contacts and a insertion and withdrawal cycles, e .200 SPACING vise clamp wire termination design. and over the full .054" to .071" Superior Connection Bo eee oheae 6 TO 36 CONTACTS Kay Iote line BEPinianie of Standard PCD plating is .000030" ey to the Superior perton gold over a nickel underplate on e CANTILEVER BEAM the Electrocon ELD/200 is the phosphor bronze contacts. CONTACTS unique cantilever beam contact that eliminates the board damage possible with the stamped tuning e VISE CLAMP WIRE fork contacts traditionally used in TERMINATION such connectors. The dual can- tilever beam contact also assures improved performance under board warping and bending conditions. MATERIALS: Contact: Phosphor bronze Plating: .000030 selective gold over nickel (standard); alternates available Hardware: #4-40 steel screw, nickel plated Housing: Black polyester UL94-V0 SPECIFICATIONS: Maximum Operating Temperature: 105 C Dielectric Withstanding: 3000 V Current Rating: 10 A Operating Voltage: 300 V Insulation Resistance: 10" ohms Wire Range: AWG #12 stranded, #14-26 solid and stranded. Wire Pullout Force: Meets UL 486 APPROVALS: AA UL recognized under File No. E83421 SP Canadian Standards Association recognized under File No. LR69703-2 1. Bual Cantilever Beam Contact 2. Selective .000030" Gold Plating at the board contact point. 3. Floating Vise Clamp ELD .200 ELD - -D jefepel' * t ee A . ie : .200" Spacing [> | acerca Ya Eq te a) ae =| eae | aos eel @ | Aa | My 410 | Be 1.190 wh ak Sl eeertrees 2 Technology Drive * Peabody, MA 01960 * Phone (978) 532-8800 Fax (978) 532-6800