Surface Mount Multilayer Ceramic Chip Capacitors DSCC Approved 03029 (BR/BX Dielectrics) Overview DSCC drawing no. 03029 was developed in response to the growing need and demand within the defense and aerospace industries for EIA 0402 case size MLCCs not currently offered in MIL-PRF-55681. KEMET's DSCC approved capacitors meet the requirements, specifications and standards outlined in drawing no. 03029 as well as all referenced provisions per MIL-PRF-55681. KEMET is approved to DSCC (Defense Supply Center, Columbus) drawing no. 03029 for surface mount EIA 0402 case size multilayer ceramic capacitors (MLCCs) in BR and BX dielectrics. DSCC MLCC control drawings are managed by the Defense Logistics Agency (DLA) and represent devices with case sizes, voltage ratings, and capacitance offerings not currently referenced in a valid military specification. Approved devices must meet the stringent requirements, specifications and standards outlined by DSCC. Applications Benefits Typical applications include decoupling, bypass, filtering, blocking and energy storage for use in military and aerospace applications. * EIA 0402 case size * Defense Supply Center, Columbus approved * Federal Stock Control Number, Cage Code 31433 * Meets US Department of Defense (USDoD) specifications per MIL-PRF-55681 * Meets USDoD standards per MIL-STD 202 & MIL-STD-1285 * High reliability * Surface mount device * Non-polar Outline Drawing 70Sn/30Pb B Nickel Plate N Conductive Metallization C Electrodes Dimensions - Millimeters (Inches) EIA SIZE CODE METRIC SIZE CODE 0402 1005 L LENGTH^ W WIDTH^ B BANDWIDTH T THICKNESS Maximum 1.02 (.040) 0.10 (.004) 0.51 (.020) 0.10 (.004) 0.25 (.010) 0.15 (.006) 0.61 (.024) ^For symbol "U" termination add .20 inches (0.51mm) to the positive length tolerance and .015 inches (0.38mm) to the positive width and thickness tolerances. Ordering Information 03029 BX 222 Z J Z C 7189 DSCC Drawing Number Dielectric Capacitance Code (pF) Voltage Capacitance Tolerance End Metallization^ Group C Testing Option Packaging/Grade (C-Spec)* 03029 (0402 case size) BR 2 Sig. Digits + W = 6.3V J = 5% U = SnPb (4%min) BX Number of X = 10V K = 10% Z = SnPb (4%min) Zeros Y = 16V M = 20% Blank = No group C testing Blank = Waffle Pack C = Full group C 7189 = 7" Reel L = 2,000 hour life test only Z = 25V M = 1,000 hour life test only A = 50V H = Low voltage humidity only B = 100V C = 200V ^ "U" = Base metallization-barrier metal-solder coated (tin/lead alloy, with a min of 4% lead). Melting point is +200C or less. Metallization thickness is 60-inches. ^ "Z" = Base metallization-barrier metal-tinned (tin/lead alloy, with a min of 4% lead). * Additional reeling or packaging options may be available. Contact KEMET for details. Additional termination options may be available. Contact KEMET for details. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F4003 06/10 DSCC Approved 03029 (BR/BX Dielectrics) Electrical Parameters/Characteristics: BR Dielectric Operating Temperature Range Capacitance Change with Reference to +25C and 0 Vdc Applied: Capacitance Change with Reference to +25C and 100% Rated Vdc Applied: Aging Rate (Max % Cap Loss/Decade Hour) Dielectric Withstanding Voltage Dissipation Factor (DF%) Maximum Limits @ 25C Insulation Resistance (IR) Limit @ 25C Insulation Resistance (IR) Limit @ 125C -55C to +125C 15% +15%, -40% 1% 250% 5% (10V), 3.5% (16V & 25V) and 2.5% (50V to 200V) 1000 megohm microfarads (minimum) or 100G 100 megohm microfarads (minimum) or 10G To obtain the IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Capacitance and Dissipation Factor (DF) measured under the following conditions: 1kHz 50Hz and 1.0 0.2 Vrms if capacitance >1000pF Electrical Parameters/Characteristics: BX Dielectric Operating Temperature Range Capacitance Change with Reference to +25C and 0 Vdc Applied: Capacitance Change with Reference to +25C and 100% Rated Vdc Applied: Aging Rate (Max % Cap Loss/Decade Hour) Dielectric Withstanding Voltage Dissipation Factor (DF%) Maximum Limits @ 25C Insulation Resistance (IR) Limit @ 25C Insulation Resistance (IR) Limit @ 125C -55C to +125C 15% +15%, -25% 1% 250% 5% (10V), 3.5% (16V & 25V) and 2.5% (50V to 200V) 1000 megohm microfarads (minimum) or 100G 100 megohm microfarads (minimum) or 10G To obtain the IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Capacitance and Dissipation Factor (DF) measured under the following conditions: 1kHz 50Hz and 1.0 0.2 Vrms if capacitance >1000pF Qualification/Certification Qualification Inspection per MIL-PRF-55681 Inspection Group I Voltage conditioning DWV IR (elevated temperature) Capacitance Dissipation factor IR DWV Visual and mechanical examination Group II Solderability Group III Voltage-temperature limits Thermal shock and immersion Group IV Resistance to soldering heat Moisture resistance Group V Life (at elevated ambient temperature) Group VIII Humidity, steady state, low voltage Test method paragraph 4.8.3 4.8.9 4.8.6 4.8.4 4.8.5 4.8.6 4.8.9 4.8.2 4.8.10 4.8.11 4.8.12 4.8.13 4.8.14 4.8.16 4.8.15 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F4003 06/10 DSCC Approved 03029 (BR/BX Dielectrics) Electrical Characteristics 4 10 Z & ESR - 0402, 1000pF, 25V, BX TCVC - 0402, 1000pF, 25V, BX 10 ESR Z 0 2 10 C/C (%) Magnitude Ohms 3 10 1 10 -10 -20 0 10 -30 0 VDC 25 VDC -1 10 -40 -2 10 4 10 -55 5 10 6 10 7 10 8 10 9 10 -35 -15 10 10 5 25 45 65 85 105 125 Temperature (C) Freq (Hz) Z & ESR - 0402, 2200pF, 50V, BR TCVC - 0402, 2200pF, 50V, BR 4 10 10 ESR Z 0 2 10 C/C (%) Magnitude Ohms 3 10 1 10 -10 -20 0 10 -30 0 VDC 50 VDC -1 10 -40 -2 10 4 10 5 10 6 10 7 10 8 10 9 10 10 10 -55 -35 Freq (Hz) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com -15 5 25 45 65 85 105 125 Temperature (C) F4003 06/10 DSCC Approved 03029 (BR/BX Dielectrics) DSCC DRAWING NO. 03029 DIELECTRIC 6.3V A B C W * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Cap Tolerance 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 J J J J J J J J J J J J J J J J J J J J J J J J J J K K K K K K K K K K K K K K K K K K K K K K K K K K M M M M M M M M M M M M M M M M M M M M M M M M M M 200V 200V Z 100V 100V Y 50V 50V X 25V 25V W 16V 16V Voltage Code 10V Voltage 10V Cap Code BX 6.3V Capacitance pF BR X Y Z A B C * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * EIA 0402 CASE SIZE * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Packaging Quantities CHIP SIZE (EIA) TAPE SIZE 0402 8mm BULK QUANTITY 7" REEL QUANTITY WAFFLE PACKAGING (Default) PAPER TAPE 100 10,000 Please refer to the "Ordering Information" section of this document for packaging ordering information. Soldering Process All parts incorporate the standard KEMET barrier layer of pure nickel with a tin-lead (SnPb) finish. Both "U" and "Z" termination finishes contain a minimum of 4% lead. Marking Marking is not available for EIA 0402 case size capacitors. These chips will be supplied unmarked. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com F4003 06/10