532 wala fou Td Issued 9-99 CHAMP Ribbon Style Connectors (continued) CHAMP IDC Connector (for 50 Position only) Plug Style PS Plug. Screw Lock (Thick Flange) Style PB Plug, Bail Lock 69, 2420.25 4 | [2.7262.019) 17.59 yea i753 7 = [680] [690] 4.34 Max. ay 28.52 Max. . 12.57 Ref..| [192] 28.52 [083] Max. [495] Max. 11.129) 16 4-40 UNC-28 $85 sax. bazar cee Centers [380] 2.16 |_[.085] (2 Hotes) {7 1085) 6222 15.37 om ah 15.47 1.605) M2 : [505] . = - =e \ 64.29 a | | | we a " "Jaagose (2.5391) i Min.) pa.o4ee oajRet [2.531] "63-84 oa bp . 77.62 gy ~~ 4 (S.2eq)"" [3.0568] "" Receptacle Style RS Receptacle, Screw or Bail Lock (Thick Flange) 17.53 6) [" 7H 4 498 [690] SS _ [193] Max. Max... | Ve | Q 63.31 12.57 Rat. [495] (3.280) 74 aaea.se Max. BI [2.948.014] 7 Logs]canters 15.37 | la SS -= [.805] | ee ee Max. 5 be TT Bat + j 4-40 UNC-28 | User 64.26 |, | etoles} (2.530)""* "Thick flange connectors are typically for cable-to-cable scraw lock applications. Note: These dimensions apply to all mating faces of all types of CHAMP Connectors. to. of Wire Size Housing Contact Part Numbers Positions Sofid 7 Strand Color Gat Lotter Plug Recaptache AWG ram AWG mn Des. Code Style PS Style PO _Stype RS Style RP 50 22 0.65 22 0.46 Green c 552173-1 52319-1 52064-1 2-552324-1 2 50 24-26 0.51-0.40 24 0.20 Blue B 2239974-1 352032-T 229975-1 2-652001-1 50 - = 26-27-28 0.14, 0.10, 0.09 Yellow E 552990-1 552471-1 552391-1 2-552476-1 Notes: +. A panel mount 50 position plug connector is available in thin flange with 4.75 [.187] dlameter mounting hoi, Part Number 552686-1, which has B slot contacts. 2. Style AP is not compatible with integral locking latch receptacle. For thin flange panel mount plug connectors all standard mounting hardware may be ulilized with the exception of bail lock mounting hardware. 3. Acceptable conductor insulations are polyvinyl chlorida {PVC}, polyathylena, irradiated polyethylene, polypropylene and TEFLON coating. Maximum insulation diameter 1.14 [.045] for teale that mass terminate conductors on one side at a time. For tools that Insert one conductor per side at a time, 1.09 [.043} Insulation dlameter Is the maximum. As a rule, harder insulations require smaller conductor insulation diameters. Natworking AMP Technical Support Canter/AMP FAX Sarvice Dimensions are In www. amp.com Specifications 1-800-522-6752 717-986-7777 millimeters over [inchas] subject to change.