ILLUMINATION
PB165 LUXEON CoB with CrispColor Technology Product Brief ©2016 Lumileds Holding B.V. All rights reserved.
LUXEON CoB with
CrispColor Technology™
Fashion retail lighting that makes an impact, highlighting rich
colors and increasing contrast
The LUXEON CoB with CrispColor Technology LED is the ultimate solution
that makes colors pop and makes fabrics come to life. With ecient
solid state lighting technology, the contrast of colors has never been so
vivid. Our special phosphor technology has created a higher gamut color
rendering than existing solutions with a specic color point below the
Black Body Line to allow for Class A products. Combined with industry
leading performance, LUXEON CoB with CrispColor Technology creates
a highly impactful retail experience with all of the advantages of our
LUXEON CoB range, including lowest Rth, small Light Emitting Surface (LES)
and 3-step MacAdam ellipse color denition, which is tested at 85°C.
FEATURES AND BENEFITS PRIMARY APPLICATIONS
Highest ux densities with industry’s smallest Light Emitting Surface (LES) Downlights
3-step MacAdam ellipse color denition: Freedom from Binning
for color consistency from luminaire to luminaire Indoor Area Lighting
Up to 4x lower thermal resistance than competition, enabling smaller
heatsinks and higher lumens Lamps
Supported by a comprehensive optical, mechanical and electrical ecosystem Spotlights
PB165 LUXEON CoB with CrispColor Technology Product Brief 20160712 ©2016 Lumileds Holding B.V. All rights reserved. 2
LUXEON CoB with CrispColor Technology product performance at specied test current, Tj=85°C.
PRODUCT NOMINAL
CCT
MINIMUM
CRI [1, 2, 3]
LUMINOUS FLUX [1] (lm)TYPICAL
LUMINOUS
EFFICACY (lm/W)
TEST
CURRENT
(mA)
LES
(mm)PART NUMBER
MINIMUM TYPICAL
LUXEON
CoB
1202s
2700K 90 588 653 95 200 6 L2C5-27HG1202E0600
3000K 90 648 700 101 200 6 L2C5-30HG1202E0600
3250K 90 675 720 104 200 6 L2C5-33HG1202E0600
3500K 90 656 729 106 200 6 L2C5-35HG1202E0600
4000K 90 690 767 111 200 6 L2C5-40HG1202E0600
5000K 90 716 796 115 200 6 L2C5-50HG1202E0600
LUXEON
CoB
1202
2700K 90 613 681 99 200 9 L2C5-27HG1202E0900
3000K 90 648 720 104 200 9 L2C5-30HG1202E0900
3250K 90 675 750 109 200 9 L2C5-33HG1202E0900
3500K 90 683 759 110 200 9 L2C5-35HG1202E0900
4000K 90 720 800 116 200 9 L2C5-40HG1202E0900
5000K 90 748 831 120 200 9 L2C5-50HG1202E0900
LUXEON
CoB
1203
2700K 90 907 1008 97 300 9 L2C5-27HG1203E0900
3000K 90 972 1080 104 300 9 L2C5-30HG1203E0900
3250K 90 1017 1130 109 300 9 L2C5-33HG1203E0900
3500K 90 1035 1150 111 300 9 L2C5-35HG1203E0900
4000K 90 1066 1184 114 300 9 L2C5-40HG1203E0900
5000K 90 1106 1229 119 300 9 L2C5-50HG1203E0900
LUXEON
CoB
1204
2700K 90 1424 1582 101 450 13 L2C5-27HG1204E1300
3000K 90 1494 1660 106 450 13 L2C5-30HG1204E1300
3250K 90 1575 1750 112 450 13 L2C5-33HG1204E1300
3500K 90 1594 1771 113 450 13 L2C5-35HG1204E1300
4000K 90 1656 1840 117 450 13 L2C5-40HG1204E1300
5000K 90 1737 1930 123 450 13 L2C5-50HG1204E1300
LUXEON
CoB
1205
2700K 90 1850 2055 98 600 13 L2C5-27HG1205E1300
3000K 90 1953 2170 103 600 13 L2C5-30HG1205E1300
3250K 90 2034 2260 108 600 13 L2C5-33HG1205E1300
3500K 90 2070 2300 110 600 13 L2C5-35HG1205E1300
4000K 90 2172 2413 115 600 13 L2C5-40HG1205E1300
5000K 90 2255 2506 119 600 13 L2C5-50HG1205E1300
LUXEON
CoB
1208
2700K 90 2775 3083 98 900 15 L2C5-27HG1208E1500
3000K 90 2970 3300 105 900 15 L2C5-30HG1208E1500
3250K 90 3105 3450 110 900 15 L2C5-33HG1208E1500
3500K 90 3105 3450 110 900 15 L2C5-35HG1208E1500
4000K 90 3263 3626 116 900 15 L2C5-40HG1208E1500
5000K 90 3389 3766 120 900 15 L2C5-50HG1208E1500
Notes:
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specied, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,
indirect or consequential, resulting from the use of the provided information and data. Although
Lumileds Holding B.V. has attempted to provide the most accurate information and data, the
materials and services information and data are provided “as is” and Lumileds Holding B.V.
neither warranties, nor guarantees the contents and correctness of the provided information
and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user
agree to this disclaimer and user agreement with the download or use of the provided materials,
information and data.
PB165 LUXEON CoB with CrispColor Technology
Product Brief 20160712
LUXEON CoB with CrispColor Technology product performance at specied test current, Tj=85°C (continued).
PRODUCT NOMINAL
CCT
MINIMUM
CRI [1, 2, 3]
LUMINOUS FLUX [1] (lm)TYPICAL
LUMINOUS
EFFICACY (lm/W)
TEST
CURRENT
(mA)
LES
(mm)PART NUMBER
MINIMUM TYPICAL
LUXEON
CoB
1211
2700K 90 3803 4226 101 1200 19 L2C5-27HG1211E1900
3000K 90 4023 4470 107 1200 19 L2C5-30HG1211E1900
3250K 90 4190 4656 111 1200 19 L2C5-33HG1211E1900
3500K 90 4264 4738 113 1200 19 L2C5-35HG1211E1900
4000K 90 4466 4962 119 1200 19 L2C5-40HG1211E1900
5000K 90 4638 5153 123 1200 19 L2C5-50HG1211E1900
LUXEON
CoB
1216
2700K 90 4994 5549 101 1600 23 L2C5-27HG1216E2300
3000K 90 5273 5859 106 1600 23 L2C5-30HG1216E2300
3250K 90 5492 6102 111 1600 23 L2C5-33HG1216E2300
3500K 90 5589 6210 113 1600 23 L2C5-35HG1216E2300
4000K 90 5864 6515 118 1600 23 L2C5-40HG1216E2300
5000K 90 6089 6766 123 1600 23 L2C5-50HG1216E2300
Notes (continued):
1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ux measurements.
2. Typical CRI is approximately 2 points higher than the minimum CRI specied, but this is not guaranteed.
3. R9 value of 90CRI products is >50.
Mechanical Dimensions.
L2C5-xxHG1202E0600 L2C5-xxHG1202E0900 L2C5-xxHG1203E0900 L2C5-xxHG1204E1300
L2C5-xxHG1205E1300 L2C5-xxHG1208E1500 L2C5-xxHG1211E1900 L2C5-xxHG1216E2300
C
L
0.1
1±0.1
0.5±0.2
C
L
C
L
6
3.5
6.5
6
6.5
2
3.5
2
3.5
3.5
2x 16±0.2
19±0.2
R1.6
11.3±0.3
2
9+
-
0.5
0.1
° DIMENSIONS ARE IN MILLIMETERS
DRAWIN G
DO NOT SCALE THIS
METRIC
B
° THIRD ANGLE PROJECTION
COB DATASHEET
DRAWING
XX.X ±0.1 mm XX.X ±0°30'
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
2013-01-24
5:111
16x19 LES9
2013-01-24T. VU
DRAWN BYDATE
ENGINEER/CHECKER
TITLE
SCALESHEET
OF
XX.XX ±0.05 mm XX.XX ±0°00'30"
T. VU / R . HEL BING
FRAME DATE: 2011-04-18
UNLESS OTHERWISE SPECIFIED
DATE
LINEAR: ANGU LAR:
XX. ±0.2 mm XX ±1°
TOLERANCES
(UNLESS OTHER WISE SPECIFIE D)
L2C2-xxxx1202E0900
xxxx 1202
C
L
0.1
1±0.1
0.5±0.2
C
L
C
L
6
3.5
6.5
6
6.5
2
3.5
2
3.5
3.5
2x 16±0.2
19±0.2
R1.6
11.3±0.3
2
9+
-
0.5
0.1
° DIMENSIONS ARE IN MILLIMETERS
DRAWIN G
DO NOT SCALE THIS
METRIC
B
° THIRD ANGLE PROJECTION
COB DATASHEET
DRAWING
XX.X ±0.1 mm XX.X ±0°30'
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
2013-01-24
5:111
16x19 LES9
2013-01-24T. VU
DRAWN BYDATE
ENGINEER/CHECKER
TITLE
SCALESHEET
OF
XX.XX ±0.05 mm XX.XX ±0°00'30"
T. VU / R . HELBING
FRAME DATE: 2011-04-18
UNLESS OTHERWISE SPECIFIED
DATE
LINEAR: ANGU LAR:
XX. ±0.2 mm XX ±1°
TOLERANCES
(UNLESS OTHE RWISE SPECIFIE D)
L2C2-xxxx1203E0900
xxxx 1203
C
L
C
L
4.5
24±0.2
3.5
4.5
2x
R1.6
15.5±0.3
2
8
3.5
8
2
20±0.2
8.5
7.5
2
13+
-
0.5
0.1
C
L
0.1
1±0.1
0.5±0.2
L2C2-xxxx1204E1300 L2C2-xxxx1205E1300
C
L
0.1
1±0.1
0.5±0.2
C
L
C
L
4.5
24±0.2
3.5 4.5
2x
R1.6
15.5±0.3
2
8
3.5
8
2
20±0.2
8.5
7.5
2
13+
-
0.5
0.1
B
° THIRD ANGLE PROJECTION
COB DATASHEET
DRAWING
XX.X ±0.1 mm XX.X ±0°30'
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
2013-01 -24
5:111
20x24 LES13
2013-01 -24T. VU
T. VU / R. HELB ING
DATE
FRAME DATE: 2011-04-18
DRAWN BY
SCALESHEET
OF
XX.XX ±0.05 mm XX.XX ±0°00'30"
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DRAWIN G
DATE
TITLE
METRIC
ENGINEER/CHECKER
DO NOT SCALE THIS
LINEAR: ANGULA R:
XX. ±0.2 mm XX ±1°
TOLERANCES
(UNLESS OTHERW ISE SPECIFIED )
xxxx 1205
xxxx 1204
C
L
C
L
4.5
24±0.2
3.5
4.5
2x
R1.6
15.5±0.3
2
8
3.5
8
2
20±0.2
8.5
7.5
2
13+
-
0.5
0.1
C
L
0.1
1±0.1
0.5±0.2
L2C2-xxxx1204E1300 L2C2-xxxx1205E1300
C
L
0.1
1±0.1
0.5±0.2
C
L
C
L
4.5
24±0.2
3.5 4.5
2x
R1.6
15.5±0.3
2
8
3.5
8
2
20±0.2
8.5
7.5
2
13+
-
0.5
0.1
B
° THIRD ANGLE PROJECTION
COB DATASHEET
DRAWING
XX.X ±0.1 mm XX.X ±0°30'
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
2013-01 -24
5:111
20x24 LES13
2013-01 -24T. VU
T. VU / R. HELB ING
DATE
FRAME DATE: 2011-04-18
DRAWN BY
SCALESHEET
OF
XX.XX ±0.05 mm XX.XX ±0°00'30"
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DRAWIN G
DATE
TITLE
METRIC
ENGINEER/CHECKER
DO NOT SCALE THIS
LINEAR: ANGULA R:
XX. ±0.2 mm XX ±1°
TOLERANCES
(UNLESS OTHERW ISE SPECIFIED )
xxxx 1205
xxxx 1204
DRAWING
XX.X ±0.1 mm XX.X ±0°30'
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
2013-01 -24
5:111
20x24 LES15
2013-01 -24T. VU
T. VU / R. HELB ING
DATE
FRAME DATE: 2011-04-18
DRAWN BYDATE
ENGINEER/CHECKER
TITLE
XX.XX ±0.05 mm XX.XX ±0°00'30"
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DRAWIN G
DO NOT SCALE THIS
METRIC
B
SCALE
OF
COB DATASHEET
SHEET
° THIRD ANGLE PROJECTION
LINEAR: ANGULA R:
XX. ±0.2 mm XX ±1°
TOLERANCES
(UNLESS OTHERW ISE SPECIFIED )
L2C2-xxxx1208E1500
2X
2
12
C
L
C
L
C
L
YYYY-MM-DD
PER
GD&T SYMBOLOGY
ASME Y14.5M-1994
SIZE
1/20/14
4:1
11
28X28 LES19
1/20/14MMW
RENE/THUY
DATE
FRAME DATE: 2013-05-10
DRAWN BY DATE
ENGINEER/CHECKER
TITLE
SCALESHEET
OF
UNLESS OTHERWISE SPECIFIED
° DIMENSIONS ARE IN MILLIMETERS
DRAWING
DO NOT SCALE THIS
METRIC
B
° THIRD ANGLE PROJECTION
COB DATA SHEET
DRAWING
TOLERANCES
MATERIAL FINISH
- -
xxxx 1211
L2C2-xxxx1211E1900
LINEA R:
XX. 0.2mm
XX.X 0.1 mm
XX.XX 0.05mm
ANGU LAR:
XX 1
XX.X 0 30'
XX.XX 0 00'30"
TOLERANCES
(UNLESS OTHER WISE SPECIFIED)
12
9.4
6.4 9.4
11.4
11.4 9.4
9.4
11.4
11.4
YYYY-MM-DD
PER
GD& T SYM BOLOG Y
ASME Y14.5M-1994
SIZE
7/8/14
N/A11
28X28 LES23
7/8/14MMW
RENE /THUY
DATE
FRAM E DA TE : 2007-06- 29
DRAW N BY DA TE
ENGI NEER/C HECKER
TITLE
SHEET S CALES HEET
OF
° ADHE RENCE TO DW G A-5951-1561-1
UNLE SS OTHER WIS E SPECI FIED
° DIM ENSIO NS AR E IN M ILLIME TERS
DRAW ING
DO NOT S CALE TH IS
METRIC
B
° THIR D ANG LE PR OJECTION
A-5951-1745-1 (G SE) I S REQ UIRE D
COB DATA SHEET
DRAWING
(COM PANY S TD. SE CTION 608) A ND
TOLER ANCE TYP E
YYYY-MM-DD
C
L
C
LC
L
3.2
3.2
28±0.2
2
28±0.2
0.5
0.1
25±0.3
23+
-
2x 3.2
0.1
1±0.1
0.5±0.2
xxxx 1216
Notes:
1. Drawings are not scale.
2. All dimensions are in millimeters.