https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Plug-in surge arrester, in accordance with Type 2/Class II, for 2-phase power supply networks with combined PE and N installed in one conductor (3-conductor system: L1, L2, PEN), with remote indication contact. Your advantages Varistor arrester with a low leakage current Extremely narrow design, just 12 mm per position High continuous voltage of 350 V AC for 230/400 V AC networks with high voltage fluctuations Pluggable Low voltage protection level of 1.5kV Optical, mechanical status indicator With floating remote indication contact Plugs can be checked with CHECKMASTER 2 Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356948005 Weight per Piece (excluding packing) 220.000 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 97.9 mm Width 25.4 mm 05/15/2021Page1/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Technical data Dimensions Depth 74.5 mm (incl. DIN rail 7.5mm) Horizontal pitch 1.4 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 C ... 80 C Ambient temperature (storage/transport) -40 C ... 80 C Altitude 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x X, Y, Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General IEC test classification II T2 EN type T2 IEC power supply system TN-C Mode of protection L-PEN Mounting type DIN rail: 35 mm Color light grey RAL7035 traffic grey A RAL 7042 Housing material PA 6.6-FR 20% GF PBT-FR Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 2 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 240/415VAC (TN-C) Nominal frequency fN 50 Hz (60Hz) Maximum continuous voltage UC 350 VAC Rated load current IL 40 A (Biconnect M4 fork-type cable lug 6 mm) 63 A (TWIN ferrule 2 x 10 mm) Nominal discharge current In (8/20) s 20 kA Maximum discharge current Imax (8/20) s 40 kA Short-circuit current rating ISCCR 25 kA (for a backup fuse of up to 315AgG) 50 kA (for a backup fuse of up to 200AgG) 05/15/2021Page2/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Technical data Protective circuit Voltage protection level Up 1.5 kV Residual voltage Ures 1.5 kV (at In) 1.3 kV (at 10 kA) 1.2 kV (at 5 kA) 1.1 kV (at 4 kA) 1 kV (at 2 kA) TOV behavior at UT 415 VAC (5s / withstand mode) 457 VAC (120min / safe failure mode) Response time tA 25 ns Max. backup fuse with V-type through wiring 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm) 63 A (gG / TWIN ferrule 2x 10mm) Max. backup fuse with branch wiring 315 A (gG) Indicator/remote signaling Switching function Changeover contact Operating voltage 5 VAC ... 250 VAC 125 VDC (200 mA DC) Operating current 5 mA AC ... 1 A AC 1 ADC (30VDC) Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section flexible 0.14 mm ... 1.5 mm Conductor cross section solid 0.14 mm ... 1.5 mm Conductor cross section AWG 28 ... 16 Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 16 mm Conductor cross section flexible 2.5 mm ... 16 mm Conductor cross section solid 2.5 mm ... 25 mm Conductor cross section AWG 12 ... 4 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm ... 6 mm UL specifications 05/15/2021Page3/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Technical data UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (L-L) 700 VAC Maximum continuous operating voltage MCOV (L-N) 350 VAC Nom. voltage 277/480VAC Mode of protection L-L L-N Power distribution system Wye Nominal frequency 50/60 Hz Measured limiting voltage MLV (L-L) 3280 V Measured limiting voltage MLV (L-N) 2000 V Nominal discharge current In (L-L) 20 kA Nominal discharge current In (L-N) 20 kA UL indicator/remote signaling Operating voltage 125 VAC Operating current 1 A AC Tightening torque 2 lbf-in. ... 4 lbf-in. Conductor cross section AWG 30 ... 14 UL connection data Conductor cross section AWG 14 ... 2 (solid) 14 ... 4 (flexible) Tightening torque 40 lbf-in. ... 50 lbf-in. Standards and Regulations Standards/regulations IEC61643-11 2011 EN61643-11 2012 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 05/15/2021Page4/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Dimensional drawing 25,4 67 74,5 97,9 Product drawing VALVETRAB VALVETRAB T2 T2 VAL-SEC T2-350-P VAL-SEC T2-350-P Circuit diagram PEN 12 11 L1 14 FM L2 Classifications eCl@ss eCl@ss 10.0.1 27130805 eCl@ss 11.0 27130805 eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130805 05/15/2021Page5/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Classifications eCl@ss eCl@ss 9.0 27130805 ETIM ETIM 6.0 EC000941 ETIM 7.0 EC000941 UNSPSC UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 UNSPSC 21.0 39121620 Approvals Approvals Approvals DNV GL / CCA / UL Recognized / KEMA-KEUR / cUL Recognized / IECEE CB Scheme / EAC / cULus Recognized Ex Approvals Approval details DNV GL CCA https://approvalfinder.dnvgl.com/ TAE000023D NTR-NL 7347 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181 KEMA-KEUR http://www.dekra-certification.com 2196453.01 05/15/2021Page6/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Approvals cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181 IECEE CB Scheme http://www.iecee.org/ NL-34356 EAC RU CDE.*09.B.00169 cULus Recognized Accessories Accessories Device marking Label-EML (20XE)R-0803452 Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20mm Label-EML (20XE)R YE-0803453 Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20mm 05/15/2021Page7/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Accessories Zack marker strip-ZBN 18:UNBEDRUCKT-2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Zack marker strip-ZBN 18:UNBEDRUCKT-2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 End block End clamp-CLIPFIX 35-3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray Labeled device marker Marker for terminal blocks-ZBN 18,LGS:L1-N,ERDE-2749576 Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker for terminal blocks-ZBN 18,LGS:ERDE-2749589 Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 05/15/2021Page8/9 https://www.phoenixcontact.com/us/products/2905337 Type 2 surge arrester-VAL-SEC-T2-2C-350-FM-2905337 Accessories Marker pen Marker pen-X-PEN 0,35-0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Terminal marking Flat zack marker sheet-ZBFM 5/WH:UNBEDRUCKT-0803595 Flat zack marker sheet, Sheet, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 5 x 4.5 mm, Number of individual labels: 120 Spare parts Type 2 surge protection plug-VAL-SEC-T2-350-P-2905346 Replacement plug for surge arresters from the VALVETRAB SEC product range for L-N and L-PEN paths. Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 05/15/2021Page9/9