AMORPHOUS CHOKE COILS W L a D1 D2 ?MAJOR USES @Output choke coils for Switching Mode Power Supply @Choke coils for DC-DC converter @Normal mode choke coils for noise control Maximum outer diameter : D1(Vertical), D2(Horizontal) Maximum width : W Total lead length : L=30mm(+3mm, -3mm) Soldering boundary : a=1.5mmMAX *The bottom of the core or coil ( ) is defined as base surface. ?FEATURES @Miniaturization in comparison with CM series coils by about 30 percent @Lineup about the standard from 3 to 30A @Little inductance fall when overload ?COIL STANDARD SPECIFICATIONS *1 Coil Part No. (Old Coil Part No.) LACM003192JRHV00 (CM03192JR) LACM005102JRHV00 (CM05102JR) LACM008511JRHV00 (CM08511JR) LACM010261JRHV00 (CM10261JR) LACM015131JRHV00 (CM15131JR) LACM020790JRHV00 (CM20790JR) LACM025430JRHV00 (CM25430JR) LACM030320JRHV00 (CM30320JR) Rated Current A Inductance (10kHz) D.C.R. mo (max) Winding *2 mmfblines-turns 0[A] mH Rating mH 3 2000 1900 290 5 1200 1000 8 600 10 Outside Dimensions D1 W D2 mm mm mm 0.9FB1P - 126T 41.5 41.5 27.0 150 1.1FB1P - 96T 42.0 42.0 28.0 510 77 1.3FB1P - 69T 42.0 42.0 29.5 290 260 38 1.1FB2P - 48T 42.0 42.0 28.0 15 150 130 20 1.3FB2P - 34T 42.0 42.0 29.5 20 92 79 13 1.2FB3P - 27T 42.5 42.5 28.5 25 50 43 7 1.2FB4P - 20T 42.5 42.5 28.5 30 36 32 6 1.3FB4P - 17T 42.5 42.5 29.5 *1 Rated inductance tolerance : P25%, the inductance at current 0[A] indicates the reference value. *2 The number of turns indicates the reference value. The specification of the inductance takes precedence over that of the number of turns. There is a horizontal putting type in all items in the above list."V"changes into "H" in last the third digit of the name of items. There is a type with the length putting seat in @ item in the above list."V" changes into "D" in last the third digit of the name of items. There are the type with the length putting seat and the horizontal putting seat in item. The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items. *Order the auxiliary pins separately if they are required for the pedestal. Please select them according to the situation. (1/2) CAT. No. E1008E AMORPHOUS CHOKE COILS ?D.C. BIAS CHARACTERISTICS @Core : LNC322015J2, Frequency : 10 kHz 10000 Inductance L [MH] LACM003192JRHV00 1000 LACM005102JRHV00 LACM008511JRHV00 LACM010261JRHV00 LACM015131JRHV00 100 LACM020790JRHV00 LACM025430JRHV00 LACM030320JRHV00 10 0 10 20 30 40 50 60 D.C. current I [A] (2/2) CAT. No. E1008E