LPC-Link 2 :: NXP Semiconductors Page 1 of 1 Global / English You are not logged in Login Register OM13054 LPC-Link 2 Demo board description LPC-Link 2 is a stand-alone debug adapter that can be configured to support various development tools and IDEs by downloadable firmwares. Available firmware images include: J-Link by Segger CMSIS-DAP by ARM Code Red Technologies Redlink The order code for this board is OM13054 Features Compatible with the LPCXpresso-IDE and Code Red Technologies Red Suite via the Redlink interface Compatible with tools/IDEs that support the Segger J-Link via downloadable firmware image. Compatible with tools/IDEs that support CMSIS-DAP by ARM via downloadable firmware image. Descriptive summary LPC-Link 2 stand alone debug adapter. The LPC-Link 2 is the latest addition to the LPCXpresso development platform. It is an extensible, stand-alone debug adapter, that can be connecter to virtually any development board, and that support a broad variety of development tools and IDEs via downloadable firmware images. The LPC-Link 2 includes a standard 10-pin JTAG/SWD connector; a 20-pin JTAG/SWD/ETM connector; and analog, digital and serial expansion headers, making it a highly extensible platform. Available downloads Configuration tool for LPC-Link 2. LPCXpresso - Information about the LPCXpresso platform. LPCXpresso Forums Download the LPCXpresso IDE All information on this product information page is subject to the subsequent disclaimers: General product disclaimer Quality and reliability disclaimer http://www.nxp.com/demoboard/OM13054.html 10/4/2013