Technical Data Sheet DYMO Industrial Vinyl (PVC) Tape Description DYMO Industrial Vinyl tape is formulated with a permanent acrylic adhesive and a topcoat specifically for thermal transfer printing. Vinyl tape is mainly used for general ID, electrical panels, asset labeling, visual workplace, pipe marking and 5S labeling. This tape is recommended for indoor and outdoor use and can be used on curved or flat surfaces. This tape is halogen free. DYMO Part Numbers 18443 18433 1805413 1805429 1805414 1805423 1805418 18444 1805431 1805419 1805437 1805420 1805415 1805424 18445 18435 1805425 1805435 1805426 1805421 1805430 18436 1805416 1805436 1805243 1805428 18432 1805427 1805422 1805432 1805417 1805412 Available Colors & Sizes Print Color Tape Color Available Widths (in, mm) Black White Black Yellow , 9mm; 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, Black Orange Black Grey White Black White Red White Green 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm , 9mm; 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm White Blue White Purple White Brown 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm 1/2, 12mm; 3/4, 19mm; 1, 24mm Certifications and & Standards Adherence - UL Recognized as a component to UL969 (UL File Number MH48389) Last Updated 11/29/2011 Technical Data Sheet All UL information can be found at UL.com under certifications - To the best of our company's knowledge we declare that our products meet the most recent standards of the European Directives considering REACH and ROHS. None of the substances identified as "substance of concern" has been and will be contained in the product(s), listed on this Technical Data Sheet, to a higher level than mentioned in the European Directives considering REACH and ROHS. Physical Properties - Total Thickness: 178 m +/- 10% - Dimensional Stability (%): MD <1.0 observed on an aluminum panel at 70C (158F) for 24 hrs. TD <1.0 observed on an aluminum panel at 70C (158F) for 24 hrs. Adhesive Properties (tested per UL969) Adhesion to Surfaces Surface (N/25mm) ABS Stainless steel Galvanized steel PVC Polycarbonate Anodized aluminum Polystyrene HDPE Glass Polypropylene Polyethylene Terephthalate Nylon - polyamide Polyurethane paint on Aluminum Polyester paint on Aluminum PE - cross linked EPMD rubber Bare aluminum LDPE Polyimide Kapton Phenolic 72 hrs. Test Method 24 29 29 27 28 41 36 17 36 34 35 38 39 40 12 38 39 11 36 37 FTM-1 - Tack (ASTM D 2979): 800gm/cm Temperature Ratings (tested per UL969) Last Updated 11/29/2011 Technical Data Sheet Surfaces Temperature (C) Max Min Indoor Use Outdoor Use Acrylonitrile butadiene styrene Aluminum 60 -40 x x 60 -40 x x EPDM rubber 60 -40 x x Galvanized steel 60 -40 x x Glass 60 -40 x x Nylon - Polyamide 60 -40 x x Phenolic - Phenol Formaldehyde Polycarbonate 60 -40 x x 60 -40 x x Polyester paint 60 -40 x x Polyethylene 60 -40 x x Polyethylene terephthalate Polyimide 60 -40 x x 60 -40 x x Polypropylene 60 -40 x - Polystyrene 60 -40 x x Polyurethane paint 60 -40 x x Polyvinyl chloride 60 -40 x x Stainless steel 60 -40 x x Chemical Resistance (Printed with black ribbon on the Rhino 6000) Chemical # of rubs Result Test Method Fuel Gasoline Isopropyl alcohol Ethanol Water Skydrol* LD-4 Ethyl acetate Papanicolau og. 6 Hematoxylin (stain) Xylene 30x 30x 30x 30x 30x 30x 5x 30x 30x 30x No visible effect No visible effect No visible effect No visible effect No visible effect Slight print removal Printing gone No visible effect No visible effect Printing gone Crockmeter, 900g weight/arm Abrasion Resistance (Printed with the Rhino 6000) Abrasive Object # of rubs Result Test Method Pencil eraser Polystyrene pin 30x 30x No visible effect No visible effect Crockmeter, 900g weight/arm Last Updated 11/29/2011 Technical Data Sheet Sandpaper 30x Slight print removal UV light stability of: Time Result Test Method Label 30 days Constant UV light exposure in Suntester Adhesive 30 days - No visible effect on text and background - Slight shrinkage of material No loss of adhesive properties UV Light Resistance Humidity Resistance - Printed labels adhered to aluminum surface for 30 days at 45C (113F), 85% Relative Humidity with no visible effect on text or background; Slight shrinkage of material Shelf life of label cassette - Two years stored at 21C (69.8F) and 50% Relative Humidity Notice - This product is not developed to be used on humans, animals and/or in direct food contact. *Skydrol is a registered trademark from Solutia All of the descriptive information, performance data, and recommendations for the use of DYMO products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is an attempt to assist you and in no event will constitute a warranty of any kind by DYMO or DYMO distributors. All purchasers of DYMO products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. Last Updated 11/29/2011