https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, Block with vertical alignment and integrated supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section: 0.14 mm-4 mm, AWG:26-12, width: 28.6 mm, color: violet, mounting type: NS 35/7,5, NS 35/15 Your advantages Space savings of up to 50% on the DIN rail, thanks to transverse mounting Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting Time-saving conductor connection, thanks to tool-free Push-in direct connection technology Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging Clear wiring, thanks to eleven different color variants Key Commercial Data Packing unit 1 pc Minimum order quantity 8 pc GTIN GTIN 4055626391212 Weight per Piece (excluding packing) 45.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 19 01/05/2021Page1/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Technical data General Potentials 1 Nominal cross section 2.5 mm Nominal cross section feed-in 6 mm Color violet Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 32 A (with 4mm conductor cross section) Maximum total current 57 A (with 10 mm conductor cross section) Nominal current IN 24 A Nominal voltage UN 690 V Maximum load current 57 A (with 10 mm conductor cross section) Nominal current IN 41 A (with 6 mm conductor cross section) Open side panel No Ambient temperature (operation) -60 C ... 105 C (max. short-term operating temperature130C) Ambient temperature (storage/transport) -25 C ... 60 C (for a short time, not exceeding 24h, -60C to +70C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 C ... 70 C Ambient temperature (actuation) -5 C ... 70 C Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm / 0.3 kg 6 mm / 1.4 kg 10 mm / 2 kg 01/05/2021Page2/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Technical data General 0.14 mm / 0.2 kg 2.5 mm / 0.7 kg 4 mm / 0.9 kg Tensile test result Test passed Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature 45 K Short circuit stability result Test passed Conductor cross section short circuit testing 6 mm Short-time current 0.72 kA Conductor cross section short circuit testing 10 mm Short-time current 1.2 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 C Static insulating material application in cold -60 C 01/05/2021Page3/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Technical data General Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 28.6 mm Length 58.1 mm Height NS 35/7,5 32.4 mm Height NS 15 30.4 mm Connection data Connection method Push-in connection Stripping length 8 mm ... 10 mm Connection in acc. with standard IEC60947-7-1 Conductor cross section solid min. 0.14 mm Conductor cross section solid max. 4 mm Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm Conductor cross section flexible max. 2.5 mm Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm Connection cross sections directly pluggable 0.34 mm 4 mm 24 12 Conductor cross section solid min. 0.34 mm Conductor cross section solid max. 4 mm Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm 01/05/2021Page4/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Technical data Connection data Internal cylindrical gage A3 Connection Feed-in stage Connection method Push-in connection Stripping length 10 mm ... 12 mm Connection in acc. with standard IEC60947-7-1 Conductor cross section solid min. 0.5 mm Conductor cross section solid max. 10 mm Conductor cross section AWG min. 20 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.5 mm Conductor cross section flexible max. 10 mm Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm Standards and Regulations Connection in acc. with standard IEC60947-7-1 IEC60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram 01/05/2021Page5/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 11.0 27141120 eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals DNV GL / CSA / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / LR / BV / cULus Recognized Ex Approvals 01/05/2021Page6/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Approvals Approval details DNV GL https://approvalfinder.dnvgl.com/ Nominal voltage UN 500 V Nominal current IN 24 A CSA TAE00002TT http://www.csagroup.org/services-industries/product-listing/ B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 50 A 50 A 5A mm/AWG/kcmil 20-8 20-8 20-8 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 50 A 50 A 5A mm/AWG/kcmil 20-8 20-8 20-8 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 50 A 50 A 5A mm/AWG/kcmil 20-8 20-8 20-8 IECEE CB Scheme 13631 http://www.iecee.org/ Nominal voltage UN 690 V FILE E 60425 FILE E 60425 DE1-62701 01/05/2021Page7/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Approvals Nominal current IN 41 A VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx Nominal voltage UN 690 V Nominal current IN 41 A 40047797 RU CDE.AI30.B.01102 EAC RU CDE.BL08.B.00644 LR http://www.lr.org/en LR2002627TA BV http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials 59146/A0 BV cULus Recognized EAC Accessories Accessories Bridge 01/05/2021Page8/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Wire bridge-FBSW 2-5/250MM-3030172 Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black Wire bridge-FBSW 2-5/60MM-3030170 Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black Wire bridge-FBSW 2-5/110MM-3030171 Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black DIN rail DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver 01/05/2021Page9/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver 01/05/2021Page10/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored End cap-NS 35/ 7,5 CAP-1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver 01/05/2021Page11/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white passivated, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 01/05/2021Page12/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories End cap-NS 35/15 CAP-1206573 DIN rail end piece, for DIN rail NS 35/15 Insulating sleeve Insulating sleeve-MPS-IH WH-0201663 Insulating sleeve, color: white Insulating sleeve-MPS-IH RD-0201676 Insulating sleeve, color: red Insulating sleeve-MPS-IH BU-0201689 Insulating sleeve, color: blue Insulating sleeve-MPS-IH YE-0201692 Insulating sleeve, color: yellow 01/05/2021Page13/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Insulating sleeve-MPS-IH GN-0201702 Insulating sleeve, color: green Insulating sleeve-MPS-IH GY-0201728 Insulating sleeve, color: gray Insulating sleeve-MPS-IH BK-0201731 Insulating sleeve, color: black Insulating sleeve-ISH 2,5/0,2-3002843 Insulating sleeve, color: white Insulating sleeve-ISH 2,5/0,5-3002856 Insulating sleeve, color: gray 01/05/2021Page14/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Insulating sleeve-ISH 2,5/1,0-3002869 Insulating sleeve, color: black Jumper Plug-in bridge-FBS 2-5-3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red Plug-in bridge-FBS 2-5 GN-3032143 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green Plug-in bridge-FBS 2-5 BU-3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue Plug-in bridge-FBS 2-5 GY-3038969 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray 01/05/2021Page15/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Labeled terminal marker Marker card-SK 3,8 REEL P5,2 WH CUS-8199989 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8mm Marker card-SK 2,8 REEL P5,2 WH CUS-8199986 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 2.8mm Marker card-SK 3,8 REEL P5,2 WH CUS-8199989 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8mm Marker carriers Terminal strip marker carrier-KLM 2-0807575 Terminal strip marker carrier, gray, unlabeled, mounting type: plug in, lettering field size: 20 mm x 8 mm Terminal strip marker carrier-KLM 3-L-0814788 Terminal strip marker carrier, height-adjustable, for end brackets CLIPFIX 15, CLIPFIX 35 and CLIPFIX 35-5, can be labeled with BMK...20 x 8 labels, or directly with the M-PEN or X-PEN 01/05/2021Page16/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Screwdriver tools Screwdriver-SZF 1-0,6X3,5-1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Marking foil for zack marker strip-TML (EX3,8)R-0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x3.8mm, Number of individual labels: 1 Marking foil for zack marker strip-TML (104X3,8)R-0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels: 2500 Marking foil for zack marker strip-TML (104X2,8)R-0801832 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels: 2500 01/05/2021Page17/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Marking foil for zack marker strip-TML (EX2,8)R-0801836 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x2.8mm, Number of individual labels: 1 Marker for terminal blocks-US-TML (104X3,8)-0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 3.8 mm, Number of individual labels: 22 Marker for terminal blocks-US-TML (104X2,8)-0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 2.8 mm, Number of individual labels: 26 Marker card-SK U/3,8 WH:UNBEDRUCKT-0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440 Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 01/05/2021Page18/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Label-MM-TML (EX3,8)R C1 WH/BK-1092026 Label, Roll, white, unlabeled, can be labeled with: THERMOFOX, THERMOMARKGO, THERMOMARK GO.K, mounting type: adhesive, for terminal block width: 8000 mm, lettering field size: continuous x 3.8mm Test plug terminal block Test plugs-MPS-MT SN-3212251 Test plugs, with solder connection up to 1 mm conductor cross section, tin-plated surface, color: silver Test plugs-MPS-MT 1-S-1944372 Test plug, consisting of 1.0mm O test pin and 2.0mm O socket Test plugs-MPS-MT-0201744 Test plugs, with solder connection up to 1 mm conductor cross section, color: gray Test socket Test adapter-PAI-4-N GY-3032871 4 mm test adapter, for terminal blocks with 5.2mm, 6.2mm and 8.2mm pitch 01/05/2021Page19/20 https://www.phoenixcontact.com/us/products/3273126 Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126 Accessories Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 01/05/2021Page20/20