https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page1/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Distribution block, Block with vertical alignment and integrated supply, The blocks can be bridged with one
another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V,
nominal current: 24 A, connection method: Push-in connection, Push-in connection, number of connections: 19,
cross section: 0.14 mm²-4 mm², AWG:26-12, width: 28.6 mm, color: violet, mounting type: NS 35/7,5, NS
35/15
Your advantages
Space savings of up to 50% on the DIN rail, thanks to transverse mounting
Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting
Time-saving conductor connection, thanks to tool-free Push-in direct connection technology
Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging
Clear wiring, thanks to eleven different color variants
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 8 pc
GTIN
GTIN 4055626391212
Weight per Piece (excluding packing) 45.000 g
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Note Notes on operation The blocks can be bridged with one another via the
conductor shaft. For corresponding plug-in bridges, see accessories
Number of levels 1
Number of connections 19
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page2/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Technical data
General
Potentials 1
Nominal cross section 2.5 mm²
Nominal cross section feed-in 6 mm²
Color violet
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 8 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied
according to the pin assignment)
Maximum load current 32 A (with 4mm² conductor cross section)
Maximum total current 57 A (with 10 mm² conductor cross section)
Nominal current IN24 A
Nominal voltage UN690 V
Maximum load current 57 A (with 10 mm² conductor cross section)
Nominal current IN41 A (with 6 mm² conductor cross section)
Open side panel No
Ambient temperature (operation) -60 °C ... 105 °C (max. short-term operating temperature130°C)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24h, -60°C to +70°C)
Permissible humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection) Test passed
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
6 mm² / 1.4 kg
10 mm² / 2 kg
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page3/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Technical data
General
0.14 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
Tensile test result Test passed
Result of tight fit on support Test passed
Tight fit on carrier NS 35
Setpoint 5 N
Result of voltage-drop test Test passed
Result of temperature-rise test Test passed
Requirement temperature-rise test Increase in temperature ≤ 45 K
Short circuit stability result Test passed
Conductor cross section short circuit testing 6 mm²
Short-time current 0.72 kA
Conductor cross section short circuit testing 10 mm²
Short-time current 1.2 kA
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Result of aging test Test passed
Ageing test for screwless modular terminal block temperature cycles 192
Oscillation, broadband noise test result Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum Service life test category 2, bogie-mounted
Test frequency f1 = 5 Hz to f2 = 250 Hz
ASD level 6.12 (m/s2)2/Hz
Acceleration 3.12 g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Shock test result Test passed
Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
Shock form Half-sine
Acceleration 30g
Shock duration 18 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page4/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Technical data
General
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Dimensions
Width 28.6 mm
Length 58.1 mm
Height NS 35/7,5 32.4 mm
Height NS 15 30.4 mm
Connection data
Connection method Push-in connection
Stripping length 8 mm ... 10 mm
Connection in acc. with standard IEC60947-7-1
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 12
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 2.5 mm²
Min. AWG conductor cross section, flexible 26
Max. AWG conductor cross section, flexible 14
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12
Conductor cross section solid min. 0.34 mm²
Conductor cross section solid max. 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page5/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Technical data
Connection data
Internal cylindrical gage A3
Connection Feed-in stage
Connection method Push-in connection
Stripping length 10 mm ... 12 mm
Connection in acc. with standard IEC60947-7-1
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 8
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 10 mm²
Min. AWG conductor cross section, flexible 20
Max. AWG conductor cross section, flexible 10
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, minimum 0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules,
with plastic sleeve, maximum 1.5 mm²
Standards and Regulations
Connection in acc. with standard IEC60947-7-1
IEC60947-7-1
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page6/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Classifications
eCl@ss
eCl@ss 10.0.1 27141120
eCl@ss 11.0 27141120
eCl@ss 4.0 27141121
eCl@ss 4.1 27141121
eCl@ss 5.0 27141120
eCl@ss 5.1 27141120
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
eCl@ss 9.0 27141120
ETIM
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Approvals
Approvals
Approvals
DNV GL / CSA / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / LR / BV / cULus Recognized
Ex Approvals
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page7/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Approvals
Approval details
DNV GL https://approvalfinder.dnvgl.com/ TAE00002TT
Nominal voltage UN 500 V
Nominal current IN 24 A
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 50 A 50 A 5 A
mm²/AWG/kcmil 20-8 20-8 20-8
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 50 A 50 A 5 A
mm²/AWG/kcmil 20-8 20-8 20-8
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 50 A 50 A 5 A
mm²/AWG/kcmil 20-8 20-8 20-8
IECEE CB Scheme http://www.iecee.org/ DE1-62701
Nominal voltage UN 690 V
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page8/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Approvals
Nominal current IN 41 A
VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40047797
Nominal voltage UN 690 V
Nominal current IN 41 A
EAC RU C-
DE.AI30.B.01102
EAC RU C-
DE.BL08.B.00644
LR http://www.lr.org/en LR2002627TA
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 59146/A0 BV
cULus Recognized
Accessories
Accessories
Bridge
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page9/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Wire bridge-FBSW 2-5/250MM-3030172
Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black
Wire bridge-FBSW 2-5/60MM-3030170
Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black
Wire bridge-FBSW 2-5/110MM-3030171
Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black
DIN rail
DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page10/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
DIN rail perforated-NS 35/ 7,5 WH PERF 2000MM-1204119
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 WH UNPERF 2000MM-1204122
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 AL UNPERF 2000MM-0801704
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/ 7,5 ZN PERF 2000MM-1206421
DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/ 7,5 ZN UNPERF 2000MM-1206434
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page11/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762
DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
End cap-NS 35/ 7,5 CAP-1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated-NS 35/15 PERF 2000MM-1201730
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
passivated with a thick layer, length:2000 mm, color:silver
DIN rail perforated-NS 35/15 WH PERF 2000MM-0806602
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized, white
passivated, length:2000 mm, color:silver
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page12/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
DIN rail, unperforated-NS 35/15 WH UNPERF 2000MM-1204135
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, Galvanized,
white passivated, length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated,
length:2000 mm, color:silver
DIN rail perforated-NS 35/15 ZN PERF 2000MM-1206599
DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 ZN UNPERF 2000MM-1206586
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized,
length:2000 mm, color:silver
DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895
DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated,
length:2000 mm, color:copper-colored
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page13/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
End cap-NS 35/15 CAP-1206573
DIN rail end piece, for DIN rail NS 35/15
Insulating sleeve
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, color: white
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, color: red
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, color: blue
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, color: yellow
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page14/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, color: green
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, color: gray
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, color: black
Insulating sleeve-ISH 2,5/0,2-3002843
Insulating sleeve, color: white
Insulating sleeve-ISH 2,5/0,5-3002856
Insulating sleeve, color: gray
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page15/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Insulating sleeve-ISH 2,5/1,0-3002869
Insulating sleeve, color: black
Jumper
Plug-in bridge-FBS 2-5-3030161
Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red
Plug-in bridge-FBS 2-5 GN-3032143
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green
Plug-in bridge-FBS 2-5 BU-3036877
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue
Plug-in bridge-FBS 2-5 GY-3038969
Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page16/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Labeled terminal marker
Marker card-SK 3,8 REEL P5,2 WH CUS-8199989
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8˽mm
Marker card-SK 2,8 REEL P5,2 WH CUS-8199986
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 2.8˽mm
Marker card-SK 3,8 REEL P5,2 WH CUS-8199989
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8˽mm
Marker carriers
Terminal strip marker carrier-KLM 2-0807575
Terminal strip marker carrier, gray, unlabeled, mounting type: plug in, lettering field size: 20 mm x 8 mm
Terminal strip marker carrier-KLM 3-L-0814788
Terminal strip marker carrier, height-adjustable, for end brackets CLIPFIX 15, CLIPFIX 35 and CLIPFIX 35-5, can be
labeled with BMK...20 x 8 labels, or directly with the M-PEN or X-PEN
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page17/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Screwdriver tools
Screwdriver-SZF 1-0,6X3,5-1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
Terminal marking
Marking foil for zack marker strip-TML (EX3,8)R-0801837
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x3.8mm, Number of individual
labels: 1
Marking foil for zack marker strip-TML (104X3,8)R-0801833
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels:
2500
Marking foil for zack marker strip-TML (104X2,8)R-0801832
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels:
2500
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page18/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Marking foil for zack marker strip-TML (EX2,8)R-0801836
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x2.8mm, Number of individual
labels: 1
Marker for terminal blocks-US-TML (104X3,8)-0830768
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field
size: 104 x 3.8 mm, Number of individual labels: 22
Marker for terminal blocks-US-TML (104X2,8)-0830767
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field
size: 104 x 2.8 mm, Number of individual labels: 26
Marker card-SK U/3,8 WH:UNBEDRUCKT-0803906
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels:
1440
Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels:
3600
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page19/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Label-MM-TML (EX3,8)R C1 WH/BK-1092026
Label, Roll, white, unlabeled, can be labeled with: THERMOFOX, THERMOMARKGO, THERMOMARK GO.K, mounting
type: adhesive, for terminal block width: 8000 mm, lettering field size: continuous x 3.8˽mm
Test plug terminal block
Test plugs-MPS-MT SN-3212251
Test plugs, with solder connection up to 1 mm² conductor cross section, tin-plated surface, color: silver
Test plugs-MPS-MT 1-S-1944372
Test plug, consisting of 1.0mm Ø test pin and 2.0mm Ø socket
Test plugs-MPS-MT-0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test socket
Test adapter-PAI-4-N GY-3032871
4 mm test adapter, for terminal blocks with 5.2mm, 6.2mm and 8.2mm pitch
https://www.phoenixcontact.com/us/products/3273126
01/05/2021Page20/20
Distribution block-PTFIX 6/18X2,5-NS35 VT-3273126
Accessories
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com