DATA SHEET PHOTOCOUPLER PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES -NEPOC Series- DESCRIPTION The PS2565-1 is optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2565-1 is in a plastic DIP (Dual In-line Package) and the PS2565L-1 is lead bending type (Gull-wing) for surface mount. The PS2565L1-1 is lead bending type for long creepage distance. The PS2565L2-1 is lead bending type for long creepage distance (Gull-wing) for surface mount. FEATURES PIN CONNECTION * AC input response (Top View) * High Isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) 4 3 1 2 * High current transfer ratio (CTR = 200% TYP.) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of taping product: PS2565L-1-F3 : 2 000 pcs/reel : PS2565L2-1-E3: 1 000 pcs/reel 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector * Safety standards * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved: No. 7112/7420 * SEMKO approved: No. 903238 * NEMKO approved: No. P09210868 * DEMKO approved: No. 314999 * FIMKO approved: No. FI 25119 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS * Telephone/FAX. * FA/OA equipment * Programmable logic controller The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10236EJ05V0DS (5th edition) Date Published November 2009 NS Printed in Japan The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. 1992, 2009 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance PS2565L1-1 PS2565-1 4.60.35 4.60.35 4 3 1 2 6.50.5 6.50.5 4 3 1 2 0 to 15 +0.1 0.25 -0.05 1.250.15 10.16 3.50.3 3.15 3.85 0.35 0.4 3.50.3 3.20.4 4.150.4 7.62 0.500.1 0.25 M 1.250.15 0.500.10 0.25 M +0.1 0.25-0.05 2.54 0 to 15 2.54 Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PS2565L2-1 PS2565L-1 4.60.35 4.60.35 3 1 2 3 1 2 2.54 PHOTOCOUPLER CONSTRUCTION Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 4 mm Isolation Thickness 2 0.25-0.05 +0.1 0.90.25 10.16 +0.2 2.54 0.15 Parameter 0.250.2 3.50.3 0.1 +0.1 -0.05 0.25 +0.1 -0.05 6.50.5 3.50.3 0.25 M 0.25 1.250.15 0.25 M 0.90.25 9.600.4 1.250.15 4 6.50.5 4 0.4 mm Data Sheet PN10236EJ05V0DS 11.8-0.5 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 MARKING EXAMPLE No. 1 pin Mark 2565 NJ931 N J Assembly Lot 9 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Pb-Free Pb-Free and Halogen Free Made in Japan Made in Taiwan New PKG J K New PKG R Y *1 *1 Special version Data Sheet PN10236EJ05V0DS 3 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Specification Pb-Free Approval PS2565-1 PS2565-1-A Magazine case 100 pcs PS2565L-1 PS2565L-1-A (UL, CSA, BSI, PS2565L1-1 PS2565L1-1-A SEMKO, NEMKO, PS2565L2-1 PS2565L2-1-A DEMKO, FIMKO PS2565L-1-F3 PS2565L-1-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-E3 PS2565L2-1-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1-V-A Magazine case 100 pcs PS2565L-1-V PS2565L-1-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1-V-A approved products PS2565L2-1-V PS2565L2-1-V-A (option) PS2565L-1-V-F3 PS2565L-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2565-1 PS2565-1Y-A Special version PS2565L-1 PS2565L-1Y-A (Pb-Free and (UL, CSA, BSI, PS2565L1-1 PS2565L1-1Y-A Halogen Free) SEMKO, NEMKO, PS2565L2-1 PS2565L2-1Y-A PS2565L-1-F3 PS2565L-1Y-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-E3 PS2565L2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2565-1-V PS2565-1Y-V-A Magazine case 100 pcs PS2565L-1-V PS2565L-1Y-V-A (VDE0884 Part2) PS2565L1-1-V PS2565L1-1Y-V-A approved products PS2565L2-1-V PS2565L2-1Y-V-A (option) PS2565L-1-V-F3 PS2565L-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2565L2-1-V-E3 PS2565L2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel Magazine case 100 pcs Standard products PS2565-1 DIN EN60747-5-2 Standard products DEMKO, FIMKO Data Sheet PN10236EJ05V0DS Number approved) approved) DIN EN60747-5-2 *1 For the application of the Safety Standard, following part number should be used. 4 Application Part PS2565-1 *1 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Ratings Unit IF 80 mA PD/C 1.5 mW/C PD 150 mW IFP 1 A Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 7 V IC 50 mA PC/C 1.5 mW/C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Diode Forward Current (DC) Power Dissipation Derating Power Dissipation *1 Peak Forward Current Transistor Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10236EJ05V0DS 5 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Transistor Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = 10 mA 1.17 Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 100 ICEO VCE = 80 V, IF = 0 mA CTR IF = 5 mA, VCE = 5 V 80 CTR1/ IF = 5 mA, VCE = 5 V 0.3 Collector to Emitter Dark pF 100 nA 200 400 % 1.0 3.0 Current Coupled Current Transfer Ratio (IC/IF) CTR Ratio *1 CTR2 Collector Saturation VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V Voltage Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 Rise Time tr *2 tf Fall Time 10 VCC = 10 V, IC = 2 mA, RL = 100 11 0.5 pF 3 s 5 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IC1 IF1 VCE IC2 IF2 *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 Input ton 50 VOUT RL = 100 td toff ts 90% Output 10% tr 6 Data Sheet PN10236EJ05V0DS tf PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 100 1.5 mW/C 50 0 25 50 75 100 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 125 150 100 1.5 mW/C 50 0 150 25 125 150 FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 50 60 TA = +100C +60C +25C Forward Current IF (mA) Forward Current IF (mA) 100 Ambient Temperature TA (C) Ambient Temperature TA (C) 10 5 0C -25C -55C 1 0.5 40 20 0 -20 -40 -60 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 -80 1.5 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA 10 mA 10 000 VCE = 80 V 40 V 24 V 10 V 5V 1 000 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 75 50 100 10 1 - 50 -25 0 25 50 75 100 10 2 mA IF = 1 mA 1 0.5 0.1 0 Ambient Temperature TA (C) Remark 5 mA 5 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) The graphs indicate nominal characteristics. Data Sheet PN10236EJ05V0DS 7 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR 70 Collector Current IC (mA) 60 50 40 50 mA 30 20 mA A m 10 20 IF = 5 mA 10 0 4 2 8 6 10 1.2 1.0 0.8 0.6 0.4 0 -50 -25 0 25 50 75 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 1 000 450 400 300 Switching Time t ( s) 350 Sample A B C 250 200 150 100 ts 100 10 tr 50 0 100 tf IF = 5 mA, VCC = 5 V, CTR = 290% VCE = 5 V Current Transfer Ratio CTR (%) Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 0.05 0.1 0.5 1 5 10 1 100 50 td 500 1 k Forward Current IF (mA) 5 k 10 k 50 k 100 k Load Resistance RL () SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE 50 tf tr IF = 5 mA, VCE = 5 V 0 10 Normalized Gain GV Switching Time t ( s) IC = 2 mA, VCC = 10 V, CTR = 290% td ts 1 -5 -10 100 -15 RL = 1 k -20 0.1 10 300 50 100 500 1 k 5 k 10 k 0.5 1 Load Resistance RL () Remark 8 2 5 10 20 50 100 200 500 Frequency f (kHz) The graphs indicate nominal characteristics. Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 LONG TERM CTR DEGRADATION 1.2 TYP. CTR (Relative Value) 1.0 0.8 IF = 5 mA TA = 25C 0.6 IF = 5 mA TA = 60C 0.4 0.2 0 102 103 104 105 Time (Hr) Remark The graph indicates nominal characteristics. Data Sheet PN10236EJ05V0DS 9 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimesions (Tape) 7.50.1 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2565L-1-F3 Outline and Dimensions (Reel) 2.00.5 R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 17.51.0 21.51.0 Packing: 2 000 pcs/reel 10 Data Sheet PN10236EJ05V0DS 15.9 to 19.4 Outer edge of flange PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 2.050.1 4.40.2 12.350.15 11.50.1 1.550.1 24.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 6.60.2 0.38 12.00.1 Tape Direction PS2565L2-1-E3 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 25.51.0 29.51.0 Packing: 1 000 pcs/reel Data Sheet PN10236EJ05V0DS 23.9 to 27.4 Outer edge of flange 11 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 12 Data Sheet PN10236EJ05V0DS PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10236EJ05V0DS 13 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 890 Vpeak Upr 1 335 Vpeak Upr 1 669 Vpeak UTR 8 000 Vpeak Upr = 1.5 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C VIO = 500 V dc at TA = 25C Ris MIN. 10 12 VIO = 500 V dc at TA MAX. at least 100C Ris MIN. 10 11 Package temperature Tsi 175 C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance, minimum value Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = Tsi 14 Data Sheet PN10236EJ05V0DS 9 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 * The information in this document is current as of November, 2009. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. In addition, NEC Electronics products are not taken measures to prevent radioactive rays in the product design. When customers use NEC Electronics products with their products, customers shall, on their own responsibility, incorporate sufficient safety measures such as redundancy, fire-containment and anti-failure features to their products in order to avoid risks of the damages to property (including public or social property) or injury (including death) to persons, as the result of defects of NEC Electronics products. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E0904E Data Sheet PN10236EJ05V0DS 15 PS2565-1,PS2565L-1,PS2565L1-1,PS2565L2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.