2BB0535T2Ax-33 2BB0535T2Ax-33 Target Data Sheet Base Board for 2SC0535T SCALE-2 drivers for 3300V IGBT modules with a combined electrical/fiber-optic interface for 2-level, 3-level and multilevel converter topologies with paralleling capability Abstract The 2BB0535T is a Base Board based on the 2SC0535T SCALE-2 driver core designed to drive almost all available 3300V IGBT modules such as 130mm x 140mm or 190mm x 140mm IGBT modules and others. This Base Board features a combined electrical/fiber-optic interface with a built-in DC/DC power supply to assure maximum flexibility. The user can chose between an electrical or a fiber-optic interface within the same version of the Base Board. The turn-on and turn-off gate resistors as well as the auxiliary gate capacitor of both channels are left un-assembled to allow maximum flexibility. They must be assembled by the user before start of operation. Please refer to "Description & Application Manual for 2BB0535T Base Boards" for more information. For drivers adapted to various types of high-power and high-voltage IGBT modules, refer to www.IGBT-Driver.com/go/plug-and-play Features [ Easy start of operation of 2SC0535T [ Shortens application development time [ Schematics available [ Production data available (Gerber files) [ 20-pin flat cable interface [ Electrical interface available [ Fiber-optic links available [ Allows parallel connection of IGBT modules [ Safe isolation to EN 50178 and EN 50124 [ UL compliant www.IGBT-Driver.com Applications [ 130mm x 140mm dual IGBT modules [ 130mm x 140mm single IGBT modules [ 190mm x 140mm single IGBT modules [ Half-bridge IGBT modules [ Choppers Page 1 2BB0535T2Ax-33 Target Data Sheet Safety Notice! The data contained in this data sheet is intended exclusively for technically trained staff. Handling all highvoltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory! Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation The data sheet of 2SC0535T (see www.igbt-driver.com/go/2SC0535T) applies. This data sheet contains only information which differs or completes the data contained in the data sheet of driver core 2SC0535T. It is valid for the delivered driver version. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to "Description & Application Manual for 2SC0535T drivers" and "Description & Application Manual for 2BB0535T Base Boards" on www.IGBT-Driver.com/go/2SC0535T and www.IGBT-Driver.com/go/2BB0535T. The turn-on and turn-off gate resistors as well as the auxiliary gate capacitors on this Base Board are left unassembled in order to assure maximum flexibility. Please refer to "Description & Application Manual for 2BB0535T Base Boards" for more information. Mechanical Dimensions Dimensions: See "Description & Application Manual for 2BB0535T Base Boards" Mounting principle: Connected to IGBT module over the connectors X101, X102 and X201, X202 Fiber-Optic Interfaces Interface Remarks Part type # Drive signal input Status output Fiber-optic receiver (Notes 8, 9) Fiber-optic transmitter (Notes 8, 10) HFBR-2522Z HFBR-1522Z Interface Remarks Part type # Power supply connector X3 Output connectors THT connector X101, X102, X201, X202 Electrical Connectors www.IGBT-Driver.com FCI/71922-120LF SAURO/MSB02005 Page 2 2BB0535T2Ax-33 Target Data Sheet Absolute Maximum Ratings Parameter Remarks Average supply current IDC Output power per gate Note 1 Ambient temperature <70C (Note 2) Ambient temperature 85C (Note 2) Switching operation (Note 3) Off state (Note 11) DC-link voltage Operating temperature Storage temperature Min Max Unit -40 -40 800 4.0 3.0 2200 2700 +85 +90 mA W W V V C C Typ Max Unit 4 k mA Max Unit Recommended Operating Conditions Parameter Remarks Min Resistance from TB to GND SOx current Blocking time0, ext. value Fault condition, 3.3V logic 128 Electrical Characteristics All data refer to +25C and VDC = VCC = 15V unless otherwise specified Power supply Remarks Supply current ICC Supply current ICC F = 0Hz F = 100kHz Logic Inputs and Outputs Remarks Min Typ Max Unit Input impedance SOx output voltage Electrical interface, V(INx) > 3V Fault condition, I(SOx)<8mA 3.5 4.1 4.6 0.7 k V Short-circuit Protection Remarks Min Typ Max Unit Vce-monitoring threshold Response time Between auxiliary terminals DC-link voltage = 2200V (Note 4) DC-link voltage = 2000V (Note 4) DC-link voltage = 1600V (Note 4) DC-link voltage = 1100V (Note 4) DC-link voltage = 800V (Note 4) After fault (Note 5) Blocking time www.IGBT-Driver.com Min Typ 73 84 62 7.3 7.4 7.7 10.0 14.6 90 mA mA V s s s s s ms Page 3 2BB0535T2Ax-33 Target Data Sheet Timing Characteristics Remarks Min Typ Max Jitter of turn-on delay Jitter of turn-off delay Dead time between outputs Jitter of dead time Propagation delay turn-on Propagation delay turn-off Electrical interface, Note 6 Electrical interface, Note 6 Electrical interface, Half-bridge mode Electrical interface, Half-bridge mode Fiber-optic interface Fiber-optic interface Outputs Remarks Turn-on gate resistor Rg(on) Turn-off gate resistor Rg(off) Auxiliary gate capacitor Cge Gate resistance to COMx Note 7 Note 7 Note 7 Electrical Isolation Remarks Min Creepage distance Primary to secondary side 44.0 mm Clearance distance Secondary to secondary side Primary to secondary side Secondary to secondary side 22.0 44.0 14.0 mm mm mm 2.5 1.5 4.2 t.b.d. 815 480 Min Typ ns ns s ns ns ns Max Not assembled Not assembled Not assembled 4.7 Typ Unit Max Unit nF k Unit Footnotes to the Key Data 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) If the specified value is exceeded, this indicates a Base Board overload. It should be noted that the Base Board is not protected against overload. Including the auxiliary gate capacitance Cge. If the specified value is exceeded, this indicates a Base Board overload. It should be noted that the Base Board is not protected against overload. From 70C to 85C, the maximum permissible output power can be linearly interpolated from the given data. Note that the maximum gate power generated by the auxiliary gate capacitance must be limited to 1.5W (<70C) or 1W (85C) respectively. This limit is due to active clamping under switching conditions. Refer to the "2BB0535T Description & Application Manual". Resulting pulse width of the direct output of the gate drive unit for short-circuit type I (excluding the delay of the gate resistors) Factory set value. The blocking time can be reduced with an external resistor. Refer to the "2BB0535T Description & Application Manual". Jitter measurements are performed with input signals INx switching between 0V and 15V referred to GND, with a corresponding rise time and fall time of 8ns. The gate resistors and the auxiliary gate capacitors are not assembled on this Base Board. They must be assembled by the user. Please refer to "2BB0535T Description & Application Manual". The transceivers required on the host controller side are not supplied with the gate driver. It is recommended to use the same types as those used in the gate driver. For product information refer to www.IGBT-Driver.com/go/fiberoptics The recommended transmitter current at the host controller is 20mA. A higher current may increase jitter or delay at turn-off. The typical transmitter current at the gate driver is 18mA. In case of supply undervoltage, the minimum transmitter current at the gate driver is 12mA: this is suitable for adequate plastic optical fibers with a length of more than 10 meters. www.IGBT-Driver.com Page 4 2BB0535T2Ax-33 Target Data Sheet 11) Due to the Dynamic Active Advanced Clamping Function (DA2C) implemented on the Base Board, the DC-link voltage can be increased in the off-state condition (e.g. after emergency shut-down). This value is only valid when the IGBTs are in the off state (not switching). The time during which the voltage can be applied should be limited to short periods (< 60 seconds). Refer to the "2BB0535T Description & Application Manual". Legal Disclaimer This data sheet specifies devices but cannot promise to deliver any specific characteristics. No warranty or guarantee is given - either expressly or implicitly - regarding delivery, performance or suitability. CT-Concept Technologie AG reserves the right to make modifications to its technical data and product specifications at any time without prior notice. The general terms and conditions of delivery of CT-Concept Technologie AG apply. www.IGBT-Driver.com Page 5 2BB0535T2Ax-33 Target Data Sheet Ordering Information The general terms and conditions of delivery of CT-Concept Technologie AG apply. CONCEPT Base Board Type # Related IGBTs 2BB0535T2A0-33 3300V IGBT modules Note that the 2BB0535T2A0-33 Base Boards are delivered without a 2SC0535T driver and without gate resistors and auxiliary gate capacitors. For orders of 1000 pieces or more (per delivery) the Base Board can be assembled with the 2SC0535T driver, the required gate resistors and gate capacitances. Product home page: www.IGBT-Driver.com/go/2BB0535T Refer to www.IGBT-Driver.com/go/nomenclature for information on driver nomenclature Information about Other Products For drivers adapted to high-voltage or high-power IGBT modules Direct link: www.IGBT-Driver.com/go/plug-and-play For other drivers, evaluation systems product documentation and application support Please click onto: www.IGBT-Driver.com Manufacturer CT-Concept Technologie AG A Power Integrations Company Johann-Renfer-Strasse 15 2504 Biel-Bienne Switzerland Phone Fax +41 - 32 - 344 47 47 +41 - 32 - 344 47 40 E-mail Internet Info@IGBT-Driver.com www.IGBT-Driver.com (c) 2012...2013 CT-Concept Technologie AG - Switzerland. We reserve the right to make any technical modifications without prior notice. www.IGBT-Driver.com All rights reserved. Version 2.0 from 2013-02-05 Page 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Power Integrations: 2BB0535T2A0-33