ATC 100 C Series Porcelain High RF Power Multilayer Capacitors * Case C Size (.250" x .250") * Capacitance Range 1 pF to 2700 pF * High Q * Ultra-Stable Performance * Low ESR/ESL * High RF Current/Voltage * High RF Power * High Reliability * Available with * Extended WVDC Encapsulation Option* up to 3600 VDC ATC, the industry leader, offers new improved ESR/ESL performance for the 100 C Series RF Capacitors. This high Q multilayer capacitor is ultra-stable under high RF current and voltage applications. High density Porcelain construction provides a rugged, hermetic package. ELECTRICAL AND MECHANICAL SPECIFICATIONS QUALITY FACTOR (Q): Greater than 10,000 (1.0 pF to 1000 pF) @ 1 MHz. Greater than 10,000 (1100 pF to 2700 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): ATC offers an encapsulation option for applications requiring extended protection against arc-over and corona. +90 30 PPM/C (-55C to +125C) Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and DC Blocking. 1 pF to 2700 pF: 105 Megohms min. @ +25C at rated WVDC. 104 Megohms min. @ +125C at rated WVDC. Max. test voltage is 500 VDC. Typical circuit applications: VHF/UHF RF Power Amplifiers, Antenna Tuning, Plasma Chambers and Medical (MRI coils). *For leaded styles only. INSULATION RESISTANCE (IR): WORKING VOLTAGE (WVDC): See Capacitance Values Table, p 2. ENVIRONMENTAL TESTS DIELECTRIC WITHSTANDING VOLTAGE (DWV): ATC 100 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. THERMAL SHOCK: RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 107, Condition A. AGING EFFECTS: None MOISTURE RESISTANCE: PIEZOELECTRIC EFFECTS: None MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. (No capacitance variation with voltage or pressure). CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. OPERATING TEMPERATURE RANGE: From -55C to +125C (No derating of working voltage). TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 20 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-808 Rev. M, 1/17 ATC 100 C Capacitance Values F, G, J K, M F, G, J 2500 K, M 3000 EXT. VOLT. 300 330 360 1500 2000 390 430 470 510 560 620 680 F, G, J 750 K, M 1000 1500 820 910 1000 1100 1200 1500 500 800 1800 2200 2400 300 500 2700 VOLTAGE VOLTAGE 3600 301 331 361 391 431 471 511 561 621 681 751 821 911 102 112 122 152 182 222 242 272 EXTENDED 2500 3600 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 EXTENDED B, C, D 390 430 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 VOLTAGE 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 EXTENDED 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 330 360 EXTENDED VOLTAGE EXTENDED VOLTAGE 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 B, C, D 2500 3600 2.1 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 EXTENDED VOLTAGE 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 EXTENDED VOLTAGE RATED WVDC CAP. CAP. RATED WVDC CAP. CAP. RATED WVDC CAP. CAP. RATED WVDC CAP. CAP. TOL. TOL. TOL. TOL. CODE (pF) CODE(pF) CODE (pF) CODE (pF) STD. EXT. STD. EXT. STD. EXT. STD. EXT. VRMS = 0.707 x WVDC * SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. * ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. CAPACITANCE TOLERANCE B C D F G K M J Code Tol. 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% 20% ATC PART NUMBER CODE ATC100 C 10 0 J W 2500 X C Series Packaging C - ATC Matrix Tray (Standard) T - Tape and Reel, 500 pc. qty. I - Special Packaging. Consult Factory Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Laser Marking Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Termination Code Capacitance Tolerance The above part number refers to a 100 C Series (case size C) 10 pF capacitor, J tolerance (5%), 2500 WVDC, with W termination (Tin / Lead, Solder Plated over Nickel Barrier), laser marking and ATC Waffle-packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 ATC North America sales@atceramics.com For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 100 C Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (MM) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) W W C Solder Plate T L P W C L Pellet T C Solderable Nickel Barrier T W T L 100C CA W C Gold Chip L .040 (1.02) max. RoHS Compliant Tin Plated over Nickel Barrier Termination .230 +.020 -.010 (5.84 +0.51 -0.25) Y T RoHS Compliant TL 100C MS LL C WL Microstrip L T LL C 100C .250 .015 (6.35 0.38) W * W AR Axial Ribbon L Gold Plated over Nickel Barrier Termination .145 (3.68) max. for capacitance values 680 pF; High Purity Silver Leads LL = .500 (12.7) min. WL = .240 .005 (6.10 .127) TL = .004 .001 (.102 .025) Leads are Attached with High Temperature Solder. .165 (4.19) max. for capacitance values > 680 pF. T LL 100C AW W C Axial Wire L TL L T RW T C Radial Wire L LL = .500 (12.7) min. WL = See below ** TL = .004 .001 (.102 .025) LL 100C Silver-plated Copper Leads LL = 2.25 (57.15) min. Dia. = .032 .002 (0.81 0.05) Silver Leads W Vertical Axial Ribbon N/A WL C VA .245 .025 (6.22 0.64) T LL 100C * MATERIAL Heavy Tin / Lead Coated, over Nickel Barrier Termination .230 +.020 -.010 (5.84 +0.51 -0.25) Y 100C OVERLAP (Y) Tin /Lead, Solder Plated over Nickel Barrier Termination .230 +.025 -.010 (5.84 +0.64 -0.25) Y 100C THICKNESS (T) .230 +.020 -.010 (5.84 +0.51 -0.25) Y 100C WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS W Silver-plated Copper Leads LL = 1.0 (25.4) min. Dia. = .032 .002 (0.81 0.05) Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. ** WL = .110 (2.79) for capacitance values 680 pF; WL = .130 (3.30) for capacitance values > 680 pF A M E R I C A N 3 ATC North America sales@atceramics.com T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.at c er am ic s .c om ATC 100 C Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) W C Non-Mag Solder Plate WN T L W C Non-Mag Pellet PN T L .250 .015 (6.35 0.38) .230 +.025 -.010 (5.84 +0.64 -0.25) Y 100C TN W C Non-Mag Solderable Barrier L OVERLAP (Y) T .145 (3.68) max. for capacitance values 680 pF; .165 (4.19) max. for capacitance values > 680 pF. Heavy Tin / Lead Coated, over Non-Magnetic Barrier Termination .040 (1.02) max. 100C MN C Non-Mag Microstrip WL L Tin Plated over Non-Magnetic Barrier Termination LL = .500 (12.7) min. WL = .240 .005 (6.10 .127) TL = .004 .001 (.102 .025) Leads are Attached with High Temperature Solder. .245 .025 (6.22 0.64) W RoHS Compliant High Purity Silver Leads TL LL MATERIALS Tin / Lead, Solder Plated over Non-Magnetic Barrier Termination .230 +.035 -.010 (5.84 +0.89 -0.25) Y 100C THICKNESS (T) .230 +.025 -.010 (5.84 +0.64 -0.25) Y 100C WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS T Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions Dimensions are in inches. A M E R I C A N ATC North America sales@atceramics.com 4 T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com www.a tc er am ic s .c om ATC 100 C Performance Data ESR VS. CAPACITANCE E 100, CASE C ATC SERIES Q VS. CAPACITANCE ATC SERIES 100, CASE C 100000 10000 500 MHz 0.1 30 MHz 150 MHz Q ESR (Ohms) 1 1000 30 MHz 0.01 150 MHz 100 500 MHz (Typical) 0.001 10 1 100 1000 (Typical) 10 10000 1 10 100 C CAPACITANCE (pF) 1000 10000 CAPACITANCE (pF) C SERIES RESONANCE VS. CAPACITANCE ATC SERIES 100, CASE C CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE C RMS CURRENT (Amps) FREQUENCY (MHz) 10000 1000 100 (Typical) 10 1 10 100 1000 10000 CAPACITANCE (pF) CAPACITANCE (pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE C,, EXTENDED VOLTAGE , 100 CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 100, CASE C , CASE C 1.5 The current rating is based on a 65C mounting surface and a device thermal resistance of 15C/W. A power dissipation of 4W will result in a case temperature of 125C. TC= +90 30 PPM/C 10 150 MHz 500 MHz 0.1 10 MHz 30 MHz 1 Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 10 100 1000 10000 %%CHANGE IN CAPACITANCE RMS CURRENT (Amps) Lorem ipsum 1 0.5 0 -0.5 -1 -55 -35 CAPACITANCE (pF) C A M E R I C A N ATC North America sales@atceramics.com 5 -15 5 25 45 65 TEMPERATURE (Degrees C) T E C H N I C A L C E R A M I C S ATC Europe saleseur@atceramics.com ATC Asia sales@atceramics-asia.com w w w.at c er am ic s .c om 85 105 125 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-808 Rev. M 1/17 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: American Technical Ceramics (ATC): 100C100JT2500X 100C100JT2500XT 100C182JAW500X 100C222JW300X 100C1R5CW2500XC 100C3R3CW2500XC 100C4R7CW2500XC 100C2R7CW2500XC 100C3R9CW2500XC 100C101JW2500XC 100C2R2CW2500XC 100C101JAW2500X 100C220JT2500XT