Rev. 1.0 7/06 Copyright © 2006 by Silicon Laboratories Si532
Si532
DUAL FREQUENCY CRYSTAL OSCILLATOR (XO)
(10 MHZ TO 1.4 GHZ)
Features
Applications
Description
The Si532 dual frequency XO utilizes Silicon Laboratories’ advanced
DSPLL
®
circuitry to provide a low jitter clock at high frequencies. The Si532 is
available with any-rate output frequency from 10 to 945 MHz and select
frequencies to 1400 MHz. Unlike a traditional XO where a different crystal is
required for each output frequency, the Si532 uses one fixed crystal
frequency to provide a wide range of output frequencies. This IC based
approach allows the crystal resonator to provide exceptional frequency
stability and reliability. In addition, DSPLL clock synthesis provides superior
supply noise rejection, simplifying the task of generating low jitter clocks in
noisy environments typically found in communication systems. The Si532 IC
based XO is factory configurable for a wide variety of user specifications
including frequency, supply voltage, output format, and temperature stability.
Specific configurations are factory programmed at time of shipment, thereby
eliminating long lead times associated with custom oscillators.
Functional Block Diagram
Available with any-rate output
frequencies from 10 MHz to 945 MHz
and select frequencies to 1.4 GHz
Two selectable output frequencies
3rd generation DSPLL® with superior
jitter performance
3x better frequency stability than
SAW-based oscillators
Internal fixed crystal frequency
ensures high reliability and low
aging
Available CMOS, LVPECL,
LVDS, and CML outputs
3.3, 2.5, and 1.8 V supply options
Industry-standard 5 x 7 mm
package and pinout
Pb-free/RoHS-compliant
SONET/SDH
Networking
SD/HD video
Test and measurement
Clock and data recovery
FPGA/ASIC clock generation
Fixed
Frequency
XO
Any-rate
10–1400 MHz
DSPLL®
Clock
Synthesis
VDD CLK+CLK–
FS GND
OE
Ordering Information:
See page 7.
Pin Assignments:
See page 6.
(Top View)
Si5602
1
2
3
6
5
4GND
OE
VDD
CLK+
CLK–
FS
1
2
3
6
5
4GND
OE
VDD
CLK
NC
FS
(LVDS/LVPECL/CML)
(CMOS)
Si532
2 Rev. 1.0
1. Electrical Specifications
Table 1. Recommended Operating Conditions
Parameter Symbol Test Condition Min Typ Max Units
Supply Voltage1VDD 3.3 V option 2.97 3.3 3.63
V2.5 V option 2.25 2.5 2.75
1.8 V option 1.71 1.8 1.89
Supply Current IDD Output enabled
LVPECL
CML
LVDS
CMOS
111
99
90
81
121
108
98
88
mA
TriState mode 60 70
Output Enable (OE)
and Frequency Select (FS)2
VIH 0.75 x VDD ——
V
VIL ——0.5
Operating Temperature Range3TA–40 85 ºC
Notes:
1. Selectable parameter specified by part number. See Section 3. "Ordering Information" on page 7 for further details.
2. OE and FS pins include a 17 k pullup resistor to VDD. Pulling OE to ground causes outputs to tristate.
3. If the device is powered up below –20 ºC and the ambient temperature rises by approximately 105 ºC during normal
operation, the device will perform a one-time recalibration. The output is squelched for approximately 2–3 ms during
this recalibration.
Table 2. CLK± Output Frequency Characteristics
Parameter Symbol Test Condition Min Typ Max Units
Nominal Frequency1,2 fOLVPECL/LVDS/CML 10 945
MHz
CMOS 10 160
Initial Accuracy fi
Measured at +25 °C at
time of shipping —±1.5ppm
Temperature Stability1,3 f/fO–20
–50
+20
+50 ppm
Aging fa
Frequency drift over
projected 15 year life ——±10ppm
Powerup Time4tOSC ——10ms
Settling Time After FS Change tFRQ ——10ms
Notes:
1. See Section 3. "Ordering Information" on page 7 for further details.
2. Specified at time of order by part number. Also available in frequencies from 970 to 1134 MHz and 1213 to 1417 MHz.
3. Selectable parameter specified by part number.
4. Time from powerup or tristate mode to fO.
Si532
Rev. 1.0 3
Table 3. CLK± Output Levels and Symmetry
Parameter Symbol Test Condition Min Typ Max Units
LVPECL Output Option1VOmid-level VDD – 1.42 VDD – 1.25 V
VOD swing (diff) 1.1 1.9 VPP
VSE swing (single-ended) 0.5 0.93 VPP
LVDS Output Option2VOmid-level 1.125 1.20 1.275 V
VOD swing (diff) 0.32 0.40 0.50 VPP
CML Output Option2VOmid-level VDD – 0.75 V
VOD swing (diff) 0.70 0.95 1.20 VPP
CMOS Output Option3VOH IOH =32mA 0.8 x VDD VDD V
VOL IOL =32mA 0.4
Rise/Fall time (20/80%) tR, tFLVPECL/LVDS/CML 350 ps
CMOS with CL = 15 pF 1 ns
Symmetry (duty cycle) SYM LVPECL: VDD – 1.3 V (diff)
LVDS: 1.25 V (diff)
CMOS: VDD/2
45 55 %
Notes:
1. 50 to VDD – 2.0 V.
2. Rterm = 100 (differential).
3. CL = 15 pF
Table 4. CLK± Output Phase Jitter
Parameter Symbol Test Condition Min Typ Max Units
Phase Jitter (RMS)*
for FOUT > 500 MHz
φJ12 kHz to 20 MHz (OC-48) 0.40 0.50 ps
50 kHz to 80 MHz (OC-192)
LVPECL
CML
LVDS
0.30
0.35
0.40
0.40
0.47
0.49
ps
Phase Jitter (RMS)*
for FOUT of 125 to 500 MHz
φJ12 kHz to 20 MHz (OC-48)
LVPECL
CML
LVDS
0.40
0.45
0.45
0.50
0.50
0.52
ps
*Note: Differential Modes: LVPECL/LVDS/CML. Refer to AN256 for further information.
Si532
4 Rev. 1.0
Table 5. CLK± Output Period Jitter
Parameter Symbol Test Condition Min Typ Max Units
Period Jitter*
for FOUT < 160 MHz
JPER RMS 1 ps
Peak-to-Peak 5
*Note: Any output mode, including CMOS, LVPECL, LVDS, CML. N = 1000 cycles. Refer to AN279 for further information.
Table 6. CLK± Output Phase Noise (Typical)
Configuration fC
Output
81.25 MHz
LVDS
312.5 MHz
LVPECL
1066 MHz
LVPECL
Units
Offset Frequency (f)
100 Hz
1kHz
10 kHz
100 kHz
1MHz
10 MHz
100 MHz
L (f)
dBc/Hz
–110
–127
–134
–136
–143
–147
n/a
–100
–115
–119
–123
–135
–144
–147
–87
–102
–107
111
–121
–135
–142
Table 7. Absolute Maximum Ratings1
Parameter Symbol Rating Units
Supply Voltage VDD –0.5 to +3.8 Volts
Input Voltage (any input pin) VI–0.5 to VDD + 0.3 Volts
Storage Temperature TS–55 to +125 ºC
ESD Sensitivity (HBM, per JESD22-A114) ESD >2500 Volts
Soldering Temperature (Pb-free profile)2TPEAK 260 ºC
Soldering Temperature Time @ TPEAK (Pb-free profile)2tP10 seconds
Notes:
1. Stresses beyond those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional
operation or specification compliance is not implied at these conditions.
2. Refer to Si5xx Packaging FAQ available for download at www.silabs.com/VCXO for further information, including
soldering profiles.
Si532
Rev. 1.0 5
Table 8. Environmental Compliance
The Si532 meets the following qualification test requirements.
Parameter Conditions/ Test Method
Mechanical Shock MIL-STD-883F, Method 2002.3 B
Mechanical Vibration MIL-STD-883F, Method 2007.3 A
Solderability MIL-STD-883F, Method 203.8
Gross & Fine Leak MIL-STD-883F, Method 1014.7
Resistance to Solvents MIL-STD-883F, Method 2016
Si532
6 Rev. 1.0
2. Pin Descriptions
Table 9. Pin Descriptions
Pin Symbol LVDS/LVPECL/CML Function CMOS Function
1FS*
Frequency Select
0 = First frequency selected
1 = Second frequency selected
Frequency Select
0 = First frequency selected
1 = Second frequency selected
2OE*
Output enable
0 = clock output disabled (outputs tristated)
1 = clock output enabled
Output enable
0 = clock output disabled (outputs tristated)
1 = clock output enabled
3 GND Electrical and Case Ground Electrical and Case Ground
4 CLK+ Oscillator Output Oscillator Output
5 CLK– Complementary output No connection
6V
DD Power Supply Voltage Power Supply Voltage
*Note: FS and OE include a 17 k pullup resistor to VDD. See Section 3. “Ordering Information” for details on frequency value
ordering.
1
2
3
6
5
4GND
OE
VDD
CLK
NC
FS
(Top View)
1
2
3
6
5
4GND
OE
VDD
CLK+
CLK–
FS
LVDS/LVPECL/CML CMOS
Si532
Rev. 1.0 7
3. Ordering Information
The Si532 XO was designed to support a variety of options including frequency, temperature stability, output
format, and VDD. Specific device configurations are programmed into the Si532 at time of shipment. Configurations
can be specified using the Part Number Configuration chart below. Silicon Laboratories provides a web browser-
based part number configuration utility to simplify this process. Refer to www.silabs.com/VCXOPartNumber to
access this tool and for further ordering instructions. The Si532 is supplied in an industry-standard, RoHS
compliant, 6-pad, 5 x 7 mm package.
Figure 1. Part Number Convention
Example Part Number: 532AB000108BGR is a 5 x 7 mm Dual XO in a 6 pad package. Since the six digit code (000108) is > 000100,
f0 is 644.53125 MHz (lower frequency) and f1 is 693.48299 (higher frequency), with a 3.3 V supply, LVPECL output, and Output
Enable active high polarity. Temperature stability is specified as ±20 ppm. The part is specified for a –40 to +85 C° ambient
temperature range operation and is shipped in tape and reel format.
R = Tape & Reel
Blank = Trays
Operating Temp Range C)
G –40 to +85 °C
Device Revision Letter
2nd Option Code
Code Temperature Stability (ppm, max, ±)
A50
B20
532 Dual XO
Product Family
6-digit Frequency Designator Code
Two unique frequencies can be specified within the following bands of
frequencies: 10 to 945 MHz, 970 to 1134 MHz, and 1213 to 1417 MHz. A
six digit code will be assigned for the specified combination of frequencies.
Codes > 000100 refer to dual XOs programmed with the lower frequency
value selected when FS = 0, and the higher value when FS = 1. Six digit
codes < 000100 refer to dual XOs programmed with the higher frequency
value selected when FS = 0, and the lower value when FS = 1.
532 X X XXXXXX B G R
1st Option Code
VDD Output Format Output Enable Polarity
A 3.3 LVPECL High
B 3.3 LVDS High
C 3.3 CMOS High
D3.3CML High
E 2.5 LVPECL High
F 2.5 LVDS High
G 2.5 CMOS High
H2.5CML High
J 1.8 CMOS High
K1.8CML High
M 3.3 LVPECL Low
N 3.3 LVDS Low
P3.3CMOS Low
Q3.3CML Low
R 2.5 LVPECL Low
S 2.5 LVDS Low
T2.5CMOS Low
U2.5CML Low
V1.8CMOS Low
W1.8CML Low
Note:
CMOS available to 160 MHz.
Si532
8 Rev. 1.0
4. Outline Diagram and Suggested Pad Layout
Figure 2 illustrates the package details for the Si532. Table 10 lists the values for the dimensions shown in the
illustration.
Figure 2. Si532 Outline Diagram
Table 10. Package Diagram Dimensions (mm)
Dimension Min Nom Max
A 1.45 1.65 1.85
b1.21.41.6
c0.60 TYP
D 7.00 BSC
D1 6.10 6.2 6.30
e 2.54 BSC
E 5.00 BSC
E1 4.30 4.40 4.50
L 1.07 1.27 1.47
S 1.815 BSC
R 0.7 REF
aaa 0.15
bbb 0.15
ccc 0.10
ddd 0.10
Si532
Rev. 1.0 9
5. 6-Pin PCB Land Pattern
Figure 3 illustrates the 6-pin PCB land pattern for the Si532. Table 11 lists the values for the dimensions shown in
the illustration.
Figure 3. Si532 PCB Land Pattern
Table 11. PCB Land Pattern Dimensions (mm)
Dimension Min Max
D2 5.08 REF
e 2.54 BSC
E2 4.15 REF
GD 0.84
GE 2.00
VD 8.20 REF
VE 7.30 REF
X1.70 TYP
Y2.15 REF
ZD 6.78
ZE 6.30
Notes:
1. Dimensioning and tolerancing per the ANSI Y14.5M-1994 specification.
2. Land pattern design based on IPC-7351 guidelines.
3. All dimensions shown are at maximum material condition (MMC).
4. Controlling dimension is in millimeters (mm).
Si532
10 Rev. 1.0
DOCUMENT CHANGE LIST
Revision 0.4 to Revision 0.5
Updated Table 1, “Recommended Operating
Conditions,” on page 2.
Added maximum supply current specifications.
Specified relationship between temperature at startup
and operation temperature.
Updated Table 4, “CLK± Output Phase Jitter,” on
page 3 to include maximum rms jitter generation
specifications and updated typical rms jitter
specifications.
Added Output Enable active polarity as an option in
Figure 1, “Part Number Convention,” on page 7.
Revision 0.5 to Revision 1.0
Updated Note 3 in Table 1, “Recommended
Operating Conditions,” on page 2.
Updated Figure 1, “Part Number Convention,” on
page 7.
Si532
Rev. 1.0 11
NOTES:
Si532
12 Rev. 1.0
CONTACT INFORMATION
Silicon Laboratories Inc.
4635 Boston Lane
Austin, TX 78735
Tel: 1+(512) 416-8500
Fax: 1+(512) 416-9669
Toll Free: 1+(877) 444-3032
Email: VCXOinfo@silabs.com
Internet: www.silabs.com
Silicon Laboratories, Silicon Labs, and DSPLL are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000028BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:21:13 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 48.000400
FS=1: 27.000000
(Frequencies are sorted in descending order, since this is a
multi-frequency part number code < 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000028BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000035BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:22:09 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 780.00000
FS=1: 200.00000
(Frequencies are sorted in descending order, since this is a
multi-frequency part number code < 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000035BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000104BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:20:45 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 155.52000
FS=1: 156.25000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000104BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000165BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:21:38 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 580.00000
FS=1: 671.40000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000165BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000184BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:23:01 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 80.700000
FS=1: 91.400000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000184BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000187BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:22:35 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 752.50000
FS=1: 825.00000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000187BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AA000208BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:20:13 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 62.500000
FS=1: 125.00000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AA000208BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000005BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:17:32 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 161.13281
FS=1: 155.52000
(Frequencies are sorted in descending order, since this is a
multi-frequency part number code < 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000005BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000118BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:19:45 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 74.175824
FS=1: 74.250000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000118BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000123BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:18:01 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 155.52000
FS=1: 166.62857
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000123BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000155BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:16:38 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 720.00000
FS=1: 1000.0000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000155BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000165BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:19:17 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 580.00000
FS=1: 671.40000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000165BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000166BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:18:47 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 164.35547
FS=1: 176.83816
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000166BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000167BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:18:23 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 167.33165
FS=1: 173.37075
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000167BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532AB000190BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:17:08 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 132.81250
FS=1: 156.25000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVPECL
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532AB000190BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532BA000210BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:14:51 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 100.00000
FS=1: 200.00000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 3.3V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532BA000210BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532FA000212BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:14:09 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 250.00000
FS=1: 312.50000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 2.5V
Output Enable Polarity: OE active high
Temperature Stability: +/- 50 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532FA000212BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532FB000112BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:13:39 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 622.08000
FS=1: 644.53125
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 2.5V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532FB000112BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532FB000122BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:13:12 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 106.25000
FS=1: 125.00000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 2.5V
Output Enable Polarity: OE active high
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532FB000122BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532NB000228BG
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:15:32 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 81.920000
FS=1: 122.88000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 3.3V
Output Enable Polarity: OE active low
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532NB000228BG.mht
XO/VCXO Part Number Selector Help
Oscillator Part Number Information
PART NUMBER: 532NB000228BGR
OSCILLATOR SPECIFICATION SUMMARY
4/19/2007 7:16:08 AM
Model Number: Si532 (Dual XO)
Output Frequency (MHz): FS=0: 81.920000
FS=1: 122.88000
(Frequencies are sorted in ascending order, since this is a
multi-frequency part number code > 000100.
Refer to Ordering Information in si532.pdf for more information.)
Output Format: LVDS
VDD: 3.3V
Output Enable Polarity: OE active low
Temperature Stability: +/- 20 ppm
Operating Temperature Range (°C): -40 to +85
Tape & Reel Option: Yes
Datasheet: si532.pdf
Does this match your requirements?
YES: NO:
Initiate Request Go Back Start Over
Pa
g
e 1 of 2Silicon Laboratories - XO/VCXO Part Number Selecto
r
20-A
pr
-2007mhtml:file://\\bnsndv31\data\
p
rod\
p
rod-user\user\Nanda\FOGC1\532NB000228BGR.mht