202
MEDER electronic
www.meder.com
APPLICATIONS
Single-In-Line Reed Relays reduce the required
space to a minimum. Requiring only half the PCB
area of the DIP or DIL series, the SIL relays offer all
the advantages of Reed Technology.
In-circuit-tester
High voltage cable tester
Tele-communication
Alarm systems
Measure and control systems
•
•
•
•
•
DESCRIPTION
DIMENSIONS
All dimensions in mm [inch]
PIN OUT
FEATURES
UL certied
Insulation voltages up to 4.25 kVDC
Coax screen for Z=50 Ohm Impedance
Switching frequency up to 1.5 GHz
•
•
•
•
5.08max.
[0.2]
15.24
[0.6]
3.50±0.20
[1.38±0.01] 7.80max.
[0.31]
19.80max.
[0.78]
0.60x0.25
[0.024x0.01]
High Frequency SIL
Reed Relays
with Diode
View from top of component, 2.54mm [0.10”] pitch grid
SIL RF Series
13 5 7
26
13 5 7
26
203
MEDER electronic
www.meder.com
High Frequency SIL
Reed Relays
RELAY DATA
SIL RF Series
All Data
at 20° C
Switch Model →
Contact Form →
Switch 72
Form A
Contact Ratings Conditions Min. Typ. Max. Units
Switching Power
Any DC combination of V & A
not to exceed their individual
max.‘s 15 W
Switching Voltage DC or peak AC 200 V
Switching Current DC or peak AC 1.0 A
Carry Current DC or peak AC 1.25 A
Static Contact Resistance w/ 0.5 V & 10mA 150 mΩ
Dynamic Contact Resistance Measured w/ 0.5 V & 50mA ,
1.5 ms after closure 200 mΩ
Insulation Resistance across
Contacts
Across Contact
Coil - Contact
1012
1012 1013 Ω
Breakdown Voltage across
Contacts
Across Contact
Coil - Contact
250
1500 VDC
Operate Time incl. Bounce at nominal voltage 0.7 ms
Release Time with no coil suppression 0.1 ms
Capacitance Across Contact
Coil - Contact
0.2
2.0 pF
Life Expectance
Switch Voltage
5V - 10 mA DC <10 pF stray cap. 1000 106
Cycles
For other load requirements, see the life test section on P. 120.
Environmental Data
Shock Resistance 1/2 sinus wave for 11 ms 50 g
Vibration Resistance 10 - 2000 Hz 20 g
Ambient Temperature 10°C/ minute max. allowable -20 70 oC
Stock Temperature 10°C/ minute max. allowable -35 95 oC
Soldering Temperature 5 sec. 260 oC
204
MEDER electronic
www.meder.com
High Frequency SIL
Reed Relays
SIL RF Series
COIL DATA
Contact
Form
Switch
Model
Coil
Voltage
Coil
Resistance
Pull In
Voltage
Drop Out
Voltage
Nominal
Coil Power
All Data
at 20 °C
VDC ΩVDC VDC mW
Nom. Max. Min. Typ. Max. Max. Min. Typ.
1A 72
5 7.5 450 500 550 3.5 0.75 50
12 16 900 1000 1100 8.4 1.8 145
* The pull-in / drop out voltages and coil resistance will change at the rate of 0,4 % / °C.
L = No option
D = With diode and no magnetic
shield
Part Number Example
SIL05 - 1A72 - 74L
05 is the nominal voltage
1A is the contact form
72 is the pin-out
L is the option
ORDER IFORMATIONEN
OPTIONS
Series Nominal
Voltage
Contact
Form
Switch
Model Pin Out Options
SIL XX - 1 X XX - XX X
Option 05, 12 1A 72 74 L, D
