The Altivar 312 drive is designed to make industrial and commercial machines more energy efcient, while at the same time simplifying its integration into a single
control system architecture. With the highest overtorque and the only drive with a remote graphic keypad in its class, the Altivar 312 drive is ideally suited to the
needs of material handling, packaging, food & beverage, pump & fan, and other OEM machines. It also comes standard with integrated communications port for
Modbus and CANopen networks, and optional cards for CANopen Daisy Chain, DeviceNet and Probus DP.
Altivar® 312 drive selection guide
Footnotes
[1] Integrated C2 EMC lter. C1 EMC
lter available as an option
[2] No integrated EMC lter. C2 EMC
lter available as an option
[3] Integrated C2 EMC lter up to
5 HP and C3 EMC lter over 5 HP
C1 and C2 EMC lters available
as an option
Make the most of your energySM
HP kW Amps Drive Reference Dimensions (in.)
W H D
Supply Voltage: Single-phase 208…240 V [1]
0.25 0.18 1.5 ATV312H018M2 2.83 5.71 5.2
0.5 0.37 3.3 ATV312H037M2 2.83 5.71 5.2
0.75 0.55 3.7 ATV312H055M2 2.83 5.71 5.59
1 0.75 4.8 ATV312H075M2 2.83 5.71 5.59
1.5 1.1 6.9 ATV312HU11M2 4.21 5.63 5.98
2 1.5 8 ATV312HU15M2 4.21 5.63 5.98
3 2.2 11 ATV312HU22M2 5.59 7.24 5.98
Supply Voltage: Three-phase 208…240 V [2]
0.25 0.18 1.5 ATV312H018M3 2.83 5.71 5.2
0.5 0.37 3.3 ATV312H037M3 2.83 5.71 5.2
0.75 0.55 3.7 ATV312H055M3 2.83 5.71 5.2
1 0.75 4.8 ATV312H075M3 2.83 5.71 5.2
1.5 1.1 6.9 ATV312HU11M3 4.13 5.63 5.2
2 1.5 8 ATV312HU15M3 4.13 5.63 5.2
3 2.2 11 ATV312HU22M3 4.21 5.63 5.98
4 3 13.7 ATV312HU30M3 5.59 7.24 5.98
5 4 17.5 ATV312HU40M3 5.59 7.24 5.98
7.5 5.5 27.5 ATV312HU55M3 7.09 9.13 6.77
10 7.5 33 ATV312HU75M3 7.09 9.13 6.77
15 11 54 ATV312HD11M3 9.64 12.99 7.56
20 15 66 ATV312HD15M3 9.64 12.99 7.56
HP kW Amps Drive Reference Dimensions (in.)
W H D
Supply Voltage: Three-phase 380...500 V [3]
0.5 0.37 1.5 ATV312H037N4 4.13 5.63 5.2
0.75 0.55 1.9 ATV312H055N4 4.13 5.63 5.2
1 0.75 2.3 ATV312H075N4 4.13 5.63 5.2
1.5 1.1 3 ATV312HU11N4 4.21 5.63 5.98
2 1.5 4.1 ATV312HU15N4 4.21 5.63 5.98
3 2.2 5.5 ATV312HU22N4 5.59 7.24 5.98
4 3 7.1 ATV312HU30N4 5.59 7.24 5.98
5 4 9.5 ATV312HU40N4 5.59 7.24 5.98
7.5 5.5 14.3 ATV312HU55N4 7.09 9.13 6.77
10 7.5 17 ATV312HU75N4 7.09 9.13 6.77
15 11 27.7 ATV312HD11N4 9.64 12.99 7.56
20 15 33 ATV312HD15N4 9.64 12.99 7.56
Supply Voltage: Three-phase 525...600 V [2]
1 0.75 1.7 ATV312H075S6 4.21 5.63 5.98
2 1.5 2.7 ATV312HU15S6 4.21 5.63 5.98
4 2.2 3.9 ATV312HU22S6 5.59 7.24 5.98
5 4 6.1 ATV312HU40S6 5.59 7.24 5.98
7.5 5.5 9 ATV312HU55S6 7.09 9.13 6.77
10 7.5 11 ATV312HU75S6 7.09 9.13 6.77
15 11 17 ATV312HD11S6 9.64 12.99 7.56
20 15 22 ATV312HD15S6 9.64 12.99 7.56
© 2010 Schneider Electric All Rights Reserved
January 2010 lh
Schneider Electric
Automation and Control Center of Excellence
8001 Knightdale Blvd.
Knightdale, NC 27545
Tel: 919-266-3671
www.Schneider-Electric.us
Environmental Specications
Operating temperature
+14° to +122° F (-10° to +50° C)
without derating, up to 140° F
(60° C) with derating
Storage temperature -13° to +158° F (-25° to +70° C)
Humidity
95% with no condensation or
dripping water, conforming to
IEC 600068-2-3
Altitude
3300 ft. (1000 m) without derating
3300-9850 ft. (1000-3000 m)
derate output current by 1% for
each additional 330 ft. (100 m).
Limited to 6560 ft. (2000 m) on a
single phase or a corner grounded
distribution system.
Enclosure rating IP20 rating with optional conduit
kits for UL Type 1
Vibration resistance
Conforming to IEC 60068-2-6:
1.5 mm peak to peak from 3 Hz
to 13 Hz, 1 gn from 13 to 150 Hz
Shock resistance 15 gn for 11 ms conforming to
IEC 60068-2-27
Communication Options
Protocol Reference
Probus VW3A31207
CANopen Daisy Chain VW3A31208
DeviceNet VW3A31209
Electrical Specications
Input voltage
200 V -15% to 240 V +10%
380 V -15% to 500 V +10%
525 V -15% to 600 V +10%
Input frequency 50 Hz -5% to 60 Hz +5%
Output frequency 0.5 to 500 Hz
Torque/overtorque 170…200% of nominal motor torque
Current (transient) 150% for 60 seconds
Switching Frequency Selectable from 2 kHz to 16 kHz
(ranges vary depending on drive)
Functions 50
Preset speeds 16
Analogue inputs 3
Analogue outputs 1
Logic inputs 6
Relay outputs 2
Motor control proles
(asynchronous motors)
Voltage/frequency
Sensorless ux vector control
Quadratic ratio for pumps and fans
Energy saving
Speed range 50:1
Codes and standards UL, CSA, CE, NOM, GOST
and C-Tick
Please contact your local Schneider Electric representative for NEMA Type 1
kits, Din rail mount kits, and any other additional accessories.
Document Number 8800HO0901R01/10