5SDA 09D2604 5SDA 09D2604 Old part no. DA 807-880-26 Avalanche Diode Properties low on-state voltage avalanche reverse characteristics high operational reliability suitable for parallel operation Key Parameters = 2 600 V RRM = 1 020 I FAVm = 11 500 I FSM = 0.870 V TO = 0.390 rT V A A V m Types VRRM 5SDA 09D2604 5SDA 09D2304 Conditions: 2 600 V 2 300 V Tj = -40 / 160 C, half sine waveform, f = 50 Hz Mechanical Data Fm Mounting force m Weight DS Surface creepage distance Da Air strike distance 11 1 kN 0.23 kg 30 mm 20.5 mm Fig. 1 Case ABB s.r.o. Novodvorska 1768/138a, 142 21 Praha 4, Czech Republic tel.: +420 261 306 250, http://www.abb.com/semiconductors TS - DA/043/00b Sep-11 1 of 4 5SDA 09D2604 Maximum Ratings VRRM Maximum Limits Unit 2 600 2 300 V 1 020 A 1 600 A 50 mA 5SDA 09D2604 5SDA 09D2304 Repetitive peak reverse voltage Tj = -40 / 160 C IFAVm Average forward current Tc = 85 C IFRMS RMS forward current Tc = 85 C IRRM Repetitive reverse current VR = VRRM IFSM I2t PRSM Non repetitive peak surge current tp = 8.3 ms 12 300 A VR = 0 V, half sine pulse tp = 10 ms 11 500 A Limiting load integral tp = 8.3 ms 630 000 A2s VR = 0 V, half sine pulse tp = 10 ms 661 000 A2s 50 kW Maximum avalanche power dissipation rectangular pulse 20 s Tjmin -Tjmax Operating temperature range -40 / 160 C TSTG Storage temperature range -40 / 160 C Value Unit Unless otherwise specified Tj = 160 C Characteristics min typ max VT0 Threshold voltage 0.870 V rT Forward slope resistance 0.390 m 1.500 V IF = 1000 / 3000 A VFM Maximum forward voltage 1.350 IFM = 1 800 A, Tj = 25 C Qrr Recovered charge 810 C Value Unit double side cooling 40 K/kW anode side cooling 65 VR = 100 V, IFM = 1 000 A, diF/dt = -5 A/s Unless otherwise specified Tj = 160 C Thermal Parameters Rthjc Rthch Thermal resistance junction to case Thermal resistance case to heatsink cathode side cooling 104 double side cooling 10 single side cooling 20 K/kW ABB s.r.o., Novodvorska 1768/138a, 142 21 Praha 4, Czech Republic ABB s.r.o. reserves the right to change the data contained herein at any time without notice TS - DA/043/00b Sep-11 2 of 4 5SDA 09D2604 Transient Thermal Impedance Analytical function for transient thermal impedance i 1 2 3 4 Ri( K/kW ) 20.95 10.57 7.15 1.33 i ( s ) 0.396 0.072 0.009 0.0044 4 Z thjc Ri (1 exp(t / i )) 45 Transient thermal impedance junction to case Zthjc ( K/kW ) i 1 Conditions: Fm = 11 1 kN, Double side cooled 40 35 30 25 20 15 10 5 0 0,001 0,01 0,1 1 10 Square wave pulse duration t d ( s ) IF ( A ) Fig. 2 Transient thermal impedance junction to case 7000 T j = 25 C 160 C 6000 5000 4000 3000 2000 1000 0 0 1 2 3 Fig. 3 Maximum forward voltage drop characteristics 4 VF (V) Fig. 4 Surge forward current vs. pulse length, half sine wave, single pulse, VR = 0 V, Tj = Tjmax ABB s.r.o., Novodvorska 1768/138a, 142 21 Praha 4, Czech Republic ABB s.r.o. reserves the right to change the data contained herein at any time without notice TS - DA/043/00b Sep-11 3 of 4 2000 2000 PT ( W ) PT ( W ) 5SDA 09D2604 y = 60 120 180 1800 DC 1600 y = 30 60 90 120 180 1800 270 1600 DC 1400 1400 1200 1200 1000 1000 800 800 600 600 400 400 200 200 0 0 0 200 400 600 800 1000 1200 0 I FAV ( A ) Fig. 5 Forward power loss vs. average forward current, sine waveform, f = 50 Hz, T = 1/f 160 150 600 800 1000 1200 I FAV ( A ) 170 160 150 140 140 130 130 120 120 110 110 100 400 Fig. 6 Forward power loss vs. average forward current, square waveform, f = 50 Hz, T = 1/f TC ( C ) TC ( C ) 170 200 100 DC 90 80 DC 90 270 80 70 70 y = 60 60 0 200 400 600 120 180 800 1000 y = 30 60 1200 I FAV ( A ) Fig. 7 Max. case temperature vs. aver. forward current, sine waveform, f = 50 Hz, T = 1/f 0 200 400 60 90 120 180 600 800 1000 1200 I FAV ( A ) Fig. 8 Max.case temperature vs. aver. forward current, square waveform, f = 50 Hz, T = 1/f Notes: ABB s.r.o., Novodvorska 1768/138a, 142 21 Praha 4, Czech Republic ABB s.r.o. reserves the right to change the data contained herein at any time without notice TS - DA/043/00b Sep-11 4 of 4