Thermofit Molded Parts Specification Control Drawing Limited Distribution Part Number : Description : 202D1XXX-60 Boot, Straight, With Lip NOTES inches [millimeters] 2. Dimensions appearing in table are as follows: a As Supplied b - After Unrestricted Recovery 1. All dimensions are in 3. Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating H DIA COATING (SEE NOTE 3) (7 [pe | J DIA __===- Tol ae W TYP. > is added, entry di te ill bi COLOR STRIPE reduced by 0 ma (SEE NOTE 4) Eee tte tice AS SUPPLIED AFTER UNRESTRICTED RECOVERY reguirements set forth im MSS109 S$ set Tor In le colors shall be as. follows: TABLE OF DIMENSIONS Dash No. Color PART = H = J P R s T vo w -3 White NUMBER Min | Max | Min | Min | Mox | s10% | Ref | Ref | Ref | +10% | +20% th Red ay a | Xt] @ b b b b b b b a -92 -41 -92 -49 -22 1.50 -83 12 .04 -40 -O7 Cfreere change) | Because ao2pi2i-x-60 | 125.3] | 10.5) | (25.3) |f2.41 | tee) | (sen) [tenn | cso) | tor |tio2i |ri.76) 1.1 58 1.12 58 .26 2.16 1.09 12 04 65 .O7 | Po2prse-x-60 | r2ea] | (14.37 | (28.4) |t14.71 | te6]_| (549) [t27.71 | t5.0] | toy [tres] 11.78] 1.22 :70 . 63 28 . 1.33 12 04 70 .08 Po2nra2*-60 | rar.o} |t17.e] | 131.0] |r16.0] | (7.21 | tee.6) |t35.9] | 3.0] | tuo] |t17.8) [12091 1.42 88 1.42 73 33 3.15. 1.63 12 .04 .B82 .08 202D153-X-60 | 365 | (22,4) | (38.01 [fee] | (8.4) | fa0.0) |\f41.4] | 13.0) | (1.01 |r208) |L2031 1.68 4.11 1.68 87 39 4.08 2.22 12 .065 97 .o9 | 202D163-X-80 | 42.77 | [28.2] | [42,7] | (220) | (9.91 |Ciose]|fse4] | (30) |c1e8] |(24e] | 1229] 2.04 1.38 2.04 1.39 62 5.13 a 12 065 1.56 13 2o2D174-X-60 | rer ay | (35.17 | 151.8) |(35.3) |15.8) |[130.31|fe45] | (3.0) |r1.e5] | i390) | [3.3] 2.60 1.75 2.60 1.80 -80 6.50 3.31 12 -08 1.90 -16 2020185" X-80 | ras,o] | [44,5] | (68.0) [45.7] | reo] |tte5.1) |re417 | (3.03 | (20) |f48.9] [1408] 3.22 2.27 2.25 1.00 7.00 3.75 12 -08 1.88 -16 202D196-Xx-60 |_ | =_ | | ZTE Raychem [81,7] | (57.6) | [81.7] |(57.1] | [25.4] | [177.8] |[95.3] | [3.0] | [2.0] |[47.8] |[4,06] 500 CONSTITUTION DRIVE. noes Revision : Bi Part Number : 202D1XX-X-60 Date : 20APR11 Description : Boot, Straight, With Lip Thermofit Molded Parts Port Number: 202D1XX-X-60 Specification Control Drawing Description : Boot, Straight, With Lip Limited Distribution COMPATABILITY CHART MATERIAL DASH NO.| MATERIAL DESCRIPTION RT SPEC COATING SLASH NO. COATING S NO. COATING DESCRIPTION -3 Polyolefin, Semirigid RT-301 /42 S-1017 Adhesive -4 Polyolefin, Flexible RT-1304 /42 S-1017 Adhesive -12 *VITON, Flexible RT-1312 N/A *VITON is a Registered Trademark of Dupont IF THIS DOCUMENT IS PRINTED IT BECOMES UNCONTROLLED. CHECK FOR THE LATEST REVISION. [ORDERING INFORMATION 202D1XX -X -60 /42 Base part number Material dash number (See Compatability Chart) Modification number (if necessary, see front of scd binder or a complete list) Adhesive slash number (lf necessary, see Compatability Chart) THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE; CONSULT YOUR NEAREST FIELD REPRESENTATIVE FOR CURRENT REMSION TE Connectivity Raychem $00 CONSTITUTION DRIVE oaoes Revision : BI Part Number : 202D1XXX-60 . Date : 20APR11 Description : Boot, Straight, With Lip CAD FILE MP94154