High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Right-Angle Receptacles (Continued) No. of Pos. 38 Dimensions A 25.40 1.000 B 22.86 .900 C 11.43 .450 D 0 E 0.00 .000 F 1.52 .060 2.31 .091 76 38.10 1.500 35.56 1.400 24.13 .950 1 12.70 .500 1.52 .060 2.31 .091 50.80 2.000 48.26 1.900 36.83 1.450 2 25.40 1.000 1.52 .060 2.31 .091 152 63.50 2.500 60.96 2.400 49.53 1.950 3 38.10 1.500 1.52 .060 2.31 .091 190 76.20 3.000 73.66 2.900 62.23 2.450 4 50.80 2.000 1.52 .060 2.31 .091 228 88.90 3.500 86.36 3.400 74.93 2.950 5 63.50 2.500 1.52 .060 2.31 .091 266 101.60 4.000 99.06 3.900 87.63 3.450 6 76.20 3.000 1.52 .060 2.31 .091 Part Numbers Tube 767143-1 767044-1 5767143-1 5767044-1 767089-1 5767089-1 767143-2 767044-2 5767143-2 5767044-2 767089-2 5767089-2 767143-3 767044-3 5767143-3 5767044-3 767089-3 5767089-3 767143-4 767044-4 5767143-4 5767044-4 767089-4 5767089-4 767143-5 767044-5 5767143-5 5767044-5 767089-5 5767089-5 767143-6 767044-6 5767143-6 5767044-6 767089-6 5767089-6 767143-7 767044-7 5767143-7 5767044-7 767089-7 5767089-7 MICTOR Interconnection System 114 Platings Solder Contact Tail Gold SnPb PdNi Gold Pb-free PdNi PdNi SnPb Pb-free PdNi Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi PdNi Pb-free Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi Pb-free PdNi Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi Pb-free PdNi Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi Pb-free PdNi Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi Pb-free PdNi Gold SnPb PdNi Gold Pb-free PdNi SnPb PdNi Pb-free PdNi S = Printed circuit board thickness connector is intended to be used on. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant; Indicates "5 of 6 compliant" (lead in solderable interface only). 41 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the MICTOR SB Interconnection System (0.50 [.020] and 0.80 [.032] Centerline) MICTOR SB Interconnection System Product Facts 0.50 [.020] centerline product: 105 dedicated signal lines per inch within one module (60 contacts per module; modules on 20.0 [.788] centerlines) 0.80 [.032] centerline product: 66.8 dedicated signal lines per inch within one module (40 contacts per module; modules on 20.0 [.788] centerlines) Surface mount family designed for parallel boardto-board, flex-to-board and cable-to-board configurations Infrared and forced air convection compatible housing materials Designed for 50 ohm systems or 100 ohm systems Connector housings polarized for correct mating Packaging styles available in trays and pocket tape, with both styles available with or without vacuum dots Recognized under the Component Program of Underwriter Laboratories Inc. File No. E111594 R The MICTOR SB connector family is based on the Micro-Strip concept of two rows of signal contacts divided by a center power ground plane. Various mated heights are available for parallel boardto-board systems. The MICTOR SB connector family is available in 0.50 [.020] and 0.80 [.032] centerlines. They are available in sizes ranging from 60 to 300 signal positions (in 60 position increments) for the 0.50 [.020] centerline products and from 40 to 200 signal positions (in 40 position increments) for the 0.80 [.032] centerline products. There is a discrete ground bus every 20.0 [.788] of the connector length, which can be assigned to either power or ground in any combination. The housing material is a liquid crystal polymer, compatible with infrared and forced air convection operations. The connector system maintains impedance and uses the solid ground bus between the rows of signals to provide low crosstalk and excellent high-speed signal characteristics. 42 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Material and Performance Specifications, MICTOR SB Connectors Material Specifications Material Housing -- Liquid crystal polymer, black Contacts -- Phosphor bronze Ground Bus -- Phosphor bronze Finish (Gold Flash Plating) Contacts and Ground Bus -- Gold flash over 0.00127 [.000050] min. nickel underplate Finish (10 Gold Plating) Contacts and Ground Bus -- 0.00025 [.000010] min. gold over 0.00178 [.000070] min. nickel underplate Performance Specifications Ratings Voltage -- 225 vac Current -- Signal; rated 2.0 Amps @ 80C, derated 1 Amp* Ground; rated 9.5 Amps @ 80C, fully derated 6.8 Amps* Temperature -- -65C to +125C *Consult Tyco Electronics for details on current rating. Electrical Characteristics Characteristic Impedance -- 505 ohms at 1 ns Termination Resistance -- R 15 milliohms max. for signal contacts, R 5 milliohms max. for ground bus contacts; EIA 364-23A Insulation Resistance -- 5,000 megohms min. initial, 1,000 megohms after exposures; EIA 364-21C MICTOR SB Interconnection System Dielectric Withstanding Voltage -- 375 vac for 0.50 [.032] centerline connectors and 675 vac for 0.80 [.020] centerline connectors at sea level; EIA 364-208, Condition 1 Mechanical Characteristics Solderability -- Solderable area shall have a 95% min. solder coverage; EIA 364-52 Vibration (Random) -- No discontinuities of 1 s or longer duration; EIA 364-28D, Condition V Physical Shock -- No discontinuities of 1 s or longer duration; EIA 364-27B, Method A Durability (Tested to) -- Mate and unmate samples at a rate of 500 cycles max. per hour. 100 cycles for 10 inch gold plated parts; EIA 364-9C Mating Force -- 120 oz max. per 1 module for 0.50 [.020] centerline connectors (Each module equals 60 signal contacts and 1 ground bus). 80 oz max. per 1 module for 0.80 [.032] centerline connectors (Each module equals 40 signal contacts and 1 ground bus) Unmating Force -- 24 oz max. per 1 module for 0.50 [.020] centerline connectors (Each module equals 60 signal contacts and 1 ground bus). 20 oz max. per 1 module for 0.80 [.032] centerline connectors (Each module equals 40 signal contacts and 1 ground bus) Environmental Characteristics Thermal Shock -- Subject mated samples to 5 cycles between -65C and +125C; EIA 364-32C Humidity - Temperature Cycling -- Subject mated samples to 10 cycles between -25C and +65C at 95% RH; EIA 364-31B, Method III Temperature Life -- Subject mated samples to temperature life at +105C for 300 hours; EIA 364-17 43 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Connectors Stack Height Combinations Gold Flash and 10 Gold Plated Vertical Connectors 5.00 [.197] Plug 0.80 [.032] CL (Page 47) 0.50 [.020] CL (Page 57) 8.00 [.315] Plug 0.80 [.032] CL (Page 48) 0.50 [.020] CL (Page58) 11.00 [.433] Plug 0.80 [.032] CL (Page 49) 0.50 [.020] CL (Page 59) 0.80 [.032] and 0.50 [.020] Centerline Connectors 8.00 [.315] 5.00 [.197] Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) 14.00 [.551] Plug 0.80 [.032] CL (Page 50) 0.50 [.020] CL (Page 60) 16.00 [.630] Plug 0.80 [.032] CL (Page 51) 0.50 [.020] CL (Page 61) 19.00 [.748] Plug 0.80 [.032] CL (Page 52) 0.50 [.020] CL (Page 62) 16.00 [.630] 14.00 [.551] MICTOR SB Interconnection System 11.00 [.433] 19.00 [.748] Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) 22.00 [.866] Plug 0.80 [.032] CL (Page 53) 0.50 [.020] CL (Page 63) 25.00 [.984] Plug 0.80 [.032] CL (Page 54) 0.50 [.020] CL (Page 64) 30.00 [1.181] Plug 0.80 [.032] CL (Page 55) 0.50 [.020] CL (Page 65) 30.00 [1.181] 25.00 [.984] 22.00 [.866] Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) Receptacle 0.80 [.032] CL (Page 46) 0.50 [.020] CL (Page 56) 44 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Connector Cross Section Receptacle -Z- Plug -Z- MICTOR SB Interconnection System Connectors are shown at point where signal contact first touch each other. Connectors are designed to be fully mated when the two "Z" datums meet. Green Red Blue Brown = = = = Receptacle housing Plug housing Signal contacts Ground bus contacts 45 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System 0.80 [.032] Centerline Receptacles A Ref. B 20.00 Typ. [.788] 7.24 [.285] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.15 Typ. [.006] Position No. 1 7.24 Ref. [.285] A + .003 [.128 - .001 ] D Note: Parts are available with vacuum dots for robotic placement. 0.08 3.25 +- 0.03 3.05 [.120] A TOL D 1.77 [.070] 0.95 [.038] Section A-A C O 0.89 Ref. [.035] 16.13 [.635] 6.35 [.250] 4.89 [.193] 0.41 Typ. [.016] 2.27 [.089] 0.95 Ref. [.038] 0.08 [ .003] Pad Position No. 1 0.43 Typ. [.017] MICTOR SB Interconnection System Orientation Hole 2 Plcs. 2.87 [.113] 0.20 2 Plcs. [.008] E Spaces at 20.00 [.788] = F Position No. 2 C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 21.29 .838 41.28 1.625 61.28 2.412 81.28 3.200 101.30 3.988 21.29 .838 41.28 1.625 61.28 2.412 Dimensions C D 15.20 20.13 .599 .793 35.20 40.13 1.386 1.580 55.21 60.13 2.174 2.368 75.21 80.14 2.961 3.155 95.21 100.14 3.749 3.943 15.20 20.13 .599 .793 35.20 40.13 1.386 1.580 55.21 60.13 2.174 2.368 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658043-1 2-1658043-1 1658012-1 2-1658012-1 1658462-1 2-1658462-1 1658043-2 2-1658043-2 1658012-2 2-1658012-2 1658462-2 2-1658462-2 1658043-3 2-1658043-3 1658012-3 2-1658012-3 1658462-3 2-1658462-3 1658043-4 2-1658043-4 1658012-4 2-1658012-4 1658462-4 2-1658462-4 1658043-5 2-1658043-5 1658012-5 2-1658012-5 1658462-5 2-1658462-5 4-1658043-1 6-1658043-1 4-1658012-1 6-1658012-1 4-1658462-1 6-1658462-1 4-1658043-2 6-1658043-2 4-1658012-2 6-1658012-2 4-1658462-2 6-1658462-2 4-1658043-3 6-1658043-3 4-1658012-3 6-1658012-3 4-1658462-3 6-1658462-3 Note: All part numbers are RoHS compliant. 46 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 5.00 [.197] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.11 Ref. [.280] 4.06 [.160] Note: Parts are available with vacuum dots for robotic placement. A 0.08 4.27 +- 0.03 + .003 [.168 - .001 ] D A TOL D 0.94 [.037] 0.95 [.038] Section A-A 1.33 [.053] C O 0.89 Typ. [.035] 16.89 [.665] 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] 1.45 [.057] Pad Position No. 2 0.64 Typ. [.025] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.09 [.121] B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 15.21 .599 35.20 1.386 55.22 2.174 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 .728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658044-1 2-1658044-1 1658013-1 2-1658013-1 1658463-1 2-1658463-1 1658044-2 2-1658044-2 1658013-2 2-1658013-2 1658463-2 2-1658463-2 1658044-3 2-1658044-3 1658013-3 2-1658013-3 1658463-3 2-1658463-3 1658044-4 2-1658044-4 1658013-4 2-1658013-4 1658463-4 2-1658463-4 1658044-5 2-1658044-5 1658013-5 2-1658013-5 1658463-5 2-1658463-5 4-1658044-1 6-1658044-1 4-1658013-1 6-1658013-1 4-1658463-1 6-1658463-1 4-1658044-2 6-1658044-2 4-1658013-2 6-1658013-2 4-1658463-2 6-1658463-2 4-1658044-3 6-1658044-3 4-1658013-3 6-1658013-3 4-1658463-3 6-1658463-3 Note: All part numbers are RoHS compliant. 47 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 8.00 [.315] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.11 Ref. [.280] 7.06 [.278] + .003 D A Note: Parts are available with vacuum dots for robotic placement. TOL D 0.94 [.037] 0.95 [.038] A 0.08 7.27 +- 0.03 [.286 - .001 ] Section A-A 1.33 Ref. [.053] C O 0.89 Typ. [.035] 16.89 [.665] 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] 1.45 [.057] Pad Position No. 2 0.64 Typ. [.025] MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.09 [.121] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 15.21 .599 35.20 1.386 55.22 2.174 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 .728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658045-1 2-1658045-1 1658014-1 2-1658014-1 1658464-1 2-1658464-1 1658045-2 2-1658045-2 1658014-2 2-1658014-2 1658464-2 2-1658464-2 1658045-3 2-1658045-3 1658014-3 2-1658014-3 1658464-3 2-1658464-3 1658045-4 2-1658045-4 1658014-4 2-1658014-4 1658464-4 2-1658464-4 1658045-5 2-1658045-5 1658014-5 2-1658014-5 1658464-5 2-1658464-5 4-1658045-1 6-1658045-1 4-1658014-1 6-1658014-1 4-1658464-1 6-1658464-1 4-1658045-2 6-1658045-2 4-1658014-2 6-1658014-2 4-1658464-2 6-1658464-2 4-1658045-3 6-1658045-3 4-1658014-3 6-1658014-3 4-1658464-3 6-1658464-3 Note: All part numbers are RoHS compliant. 48 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 11.00 [.433] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.12 Ref. [.280] 10.06 [.396] D A Note: Parts are available with vacuum dots for robotic placement. A 0.08 10.27 +- 0.03 .003 [.404 +- .001 ] TOL D 0.94 [.037] 0.95 [.038] Section A-A 1.33 Ref. [.053] C O 0.89 Typ. [.035] 16.90 [.665] 6.35 [.250] 5.29 [.208] 0.46 Typ. [.018] 1.45 [.057] Pad Position No. 2 0.64 Typ. [.025] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.09 [.121] B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 15.21 .599 35.20 1.386 55.22 2.174 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 .728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658046-1 2-1658046-1 1658015-1 2-1658015-1 1658465-1 2-1658465-1 1658046-2 2-1658046-2 1658015-2 2-1658015-2 1658465-2 2-1658465-2 1658046-3 2-1658046-3 1658015-3 2-1658015-3 1658465-3 2-1658465-3 1658046-4 2-1658046-4 1658015-4 2-1658015-4 1658465-4 2-1658465-4 1658046-5 2-1658046-5 1658015-5 2-1658015-5 1658465-5 2-1658465-5 4-1658046-1 6-1658046-1 4-1658015-1 6-1658015-1 4-1658465-1 6-1658465-1 4-1658046-2 6-1658046-2 4-1658015-2 6-1658015-2 4-1658465-2 6-1658465-2 4-1658046-3 6-1658046-3 4-1658015-3 6-1658015-3 4-1658465-3 6-1658465-3 Note: All part numbers are RoHS compliant. 49 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 14.00 [.551] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 5.97 [.235] 6.73 [.265] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 [.281] A 0.08 13.26 +- 0.03 + .003 [.522 - .001 ] 0.95 [.038] D Note: Parts are available with vacuum dots for robotic placement. A TOL D 0.88 [.035] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 1.45 Typ. [.057] 16.89 [.665] 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] Pad Position No. 2 MICTOR SB Interconnection System 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.09 [.121] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 15.21 .599 35.20 1.386 55.22 2.174 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 .728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658437-1 2-1658437-1 1658438-1 2-1658438-1 1658439-1 2-1658439-1 1658437-2 2-1658437-2 1658438-2 2-1658438-2 1658439-2 2-1658439-2 1658437-3 2-1658437-3 1658438-3 2-1658438-3 1658439-3 2-1658439-3 1658437-4 2-1658437-4 1658438-4 2-1658438-4 1658439-4 2-1658439-4 1658437-5 2-1658437-5 1658438-5 2-1658438-5 1658439-5 2-1658439-5 4-1658437-1 6-1658437-1 4-1658438-1 6-1658438-1 4-1658439-1 6-1658439-1 4-1658437-2 6-1658437-2 4-1658438-2 6-1658438-2 4-1658439-2 6-1658439-2 4-1658437-3 6-1658437-3 4-1658438-3 6-1658438-3 4-1658439-3 6-1658439-3 Note: All part numbers are RoHS compliant. 50 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 16.00 [.630] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 6.73 [.265] Position No. 1 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 15.34 +- 0.03 + .003 [.604 - .001 ] 0.95 [.038] D Note: Parts are available with vacuum dots for robotic placement. TOL D 0.88 [.035] A Section A-A 1.33 Ref. [.053] C O 0.89 Typ. [.035] 1.94 [.077] 16.89 [.665] 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] Pad Position No. 2 0.64 Typ. [.025] MICTOR SB Interconnection System Orientation Hole 2 Plcs. 2.98 [.117] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 40 Tape & Reel 80 120 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 15.21 .599 35.20 1.386 55.22 2.174 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 .728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658047-1 2-1658047-1 1658016-1 2-1658016-1 1658466-1 2-1658466-1 1658047-2 2-1658047-2 1658016-2 2-1658016-2 1658466-2 2-1658466-2 1658047-3 2-1658047-3 1658016-3 2-1658016-3 1658466-3 2-1658466-3 1658047-4 2-1658047-4 1658016-4 2-1658016-4 1658466-4 2-1658466-4 1658047-5 2-1658047-5 1658016-5 2-1658016-5 1658466-5 2-1658466-5 4-1658047-1 6-1658047-1 4-1658016-1 6-1658016-1 4-1658466-1 6-1658466-1 4-1658047-2 6-1658047-2 4-1658016-2 6-1658016-2 4-1658466-2 6-1658466-2 4-1658047-3 6-1658047-3 4-1658016-3 6-1658016-3 4-1658466-3 6-1658466-3 Note: All part numbers are RoHS compliant. 51 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 19.00 [.748] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 6.73 [.265] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 18.34 +- 0.03 + .003 [.722 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] A TOL D 0.88 [.035] Section A-A 1.33 Ref. [.053] C O 0.89 Typ. [.035] 16.89 [.665] 0.46 Typ. [.018] 1.94 [.077] 6.35 [.250] 5.28 [.208] Pad Position No. 2 MICTOR SB Interconnection System 0.64 Typ. [.025] Orientation Hole 2 Plcs. 2.98 [.117] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658048-1 2-1658048-1 1658017-1 2-1658017-1 1658467-1 2-1658467-1 1658048-2 2-1658048-2 1658017-2 2-1658017-2 1658467-2 2-1658467-2 1658048-3 2-1658048-3 1658017-3 2-1658017-3 1658467-3 2-1658467-3 1658048-4 2-1658048-4 1658017-4 2-1658017-4 1658467-4 2-1658467-4 1658048-5 2-1658048-5 1658017-5 2-1658017-5 1658467-5 2-1658467-5 Note: All part numbers are RoHS compliant. 52 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 22.00 [.866] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 5.97 [.235] 6.73 [.265] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 21.34 +- 0.03 + .003 [.840 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] A TOL D 0.88 [.035] Section A-A 1.33 [.053] C O 0.89 Typ. [.035] 16.89 [.665] 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] 1.94 [.077] Pad Position No. 2 Orientation Hole 2 Plcs. 2.98 [.117] MICTOR SB Interconnection System 0.64 Typ. [.025] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658049-1 2-1658049-1 1658018-1 2-1658018-1 1658468-1 2-1658468-1 1658049-2 2-1658049-2 1658018-2 2-1658018-2 1658468-2 2-1658468-2 1658049-3 2-1658049-3 1658018-3 2-1658018-3 1658468-3 2-1658468-3 1658049-4 2-1658049-4 1658018-4 2-1658018-4 1658468-4 2-1658468-4 1658049-5 2-1658049-5 1658018-5 2-1658018-5 1658468-5 2-1658468-5 Note: All part numbers are RoHS compliant. 53 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 25.00 [.984] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 5.97 [.235] 6.73 [.265] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 24.24 +- 0.03 + .003 [.954 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 0.46 Typ. [.018] 1.45 [.057] 6.35 [.250] 5.28 [.208] Pad Position No. 2 MICTOR SB Interconnection System 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.09 [.121] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658050-1 -- 1658019-1 -- 1658469-1 -- 1658050-2 -- 1658019-2 -- 1658469-2 -- 1658050-3 -- 1658019-3 -- 1658469-3 -- 1658050-4 -- 1658019-4 -- 1658469-4 -- 1658050-5 -- 1658019-5 -- 1658469-5 -- Note: All part numbers are RoHS compliant. 54 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.80 [.032] Centerline 30.00 [1.181] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 6.73 [.265] 5.97 [.235] 19 Spaces at 0.80 [.032] Typ. = 15.20 [.599] 0.20 Typ. [.008] 7.14 Ref. [.281] A Note: Parts are available with vacuum dots for robotic placement. 0.08 29.24 +- 0.03 + .003 [1.151 - .001 ] D 0.95 [.038] A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] Pad MICTOR SB Interconnection System 6.35 [.250] 5.28 [.208] 0.46 Typ. [.018] 1.45 [.057] Position No. 2 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.09 [.121] 1.07 2 Plcs. [.042] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging No. of Type Positions 40 80 Tray 120 160 200 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.015 100.03 3.938 15.21 .599 35.20 1.386 55.22 2.174 75.21 2.961 95.22 3.749 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 30 Gold Plating Vacuum Dots Without With 1658051-1 -- 1658020-1 -- 1658470-1 -- 1658051-2 -- 1658020-2 -- 1658470-2 -- 1658051-3 -- 1658020-3 -- 1658470-3 -- 1658051-4 -- 1658020-4 -- 1658470-4 -- 1658051-5 -- 1658020-5 -- 1658470-5 -- Note: All part numbers are RoHS compliant. 55 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline Receptacles A Ref. B 20.00 Typ. [.788] 7.24 [.285] Position No. 1 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 0.15 Typ. [.006] 7.49 Ref. [.295] + .003 A D Note: Parts are available with vacuum dots for robotic placement. 0.08 3.25 +- 0.03 [.128 - .001 ] A TOL D 1.77 [.070] 0.76 [.030] Section A-A C O 0.89 Ref. [.035] 0.95 Ref. [.038] 0.08 [ .003] 16.13 [.635] 2.29 [.090] 0.28 Typ. [.011] 6.35 [.250] 4.90 [.193] Pad 0.43 Typ. [.017] MICTOR SB Interconnection System Orientation Hole 2 Plcs. E Spaces at 20.00 [.788] = F 2.88 [.113] 0.20 2 Plcs. [.008] B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 21.29 .838 41.28 1.625 61.28 2.412 81.28 3.200 101.30 3.988 21.29 0.838 41.28 1.625 61.28 2.412 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 20.13 .793 40.13 1.580 60.13 2.368 80.14 3.155 100.14 3.943 20.13 0.793 40.13 1.580 60.13 2.368 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658052-1 2-1658052-1 1658021-1 2-1658021-1 1658052-2 2-1658052-2 1658021-2 2-1658021-2 1658052-3 2-1658052-3 1658021-3 2-1658021-3 1658052-4 2-1658052-4 1658021-4 2-1658021-4 1658052-5 2-1658052-5 1658021-5 2-1658021-5 4-1658052-1 6-1658052-1 4-1658021-1 6-1658021-1 4-1658052-2 6-1658052-2 4-1658021-2 6-1658021-2 4-1658052-3 6-1658052-3 4-1658021-3 6-1658021-3 Note: All part numbers are RoHS compliant. 56 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 5.00 [.197] Stack Height Plugs A Ref. B 20.00 Typ. [.788] Position No. 1 5.97 [.235] 0.20 Typ. [.008] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 7.11 Ref. [.280] + .003 A D Note: Parts are available with vacuum dots for robotic placement. 0.08 4.27 +- 0.05 [.168 - .002 ] A TOL D 0.94 [.037] 0.95 [.038] Section A-A 0.95 Ref. [.038] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 0.64 Typ. [.025] E Spaces at 20.00 [.788] = F 1.05 2 Plcs. [.041] Position No. 1 MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.10 [.122] B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 0.728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658053-1 2-1658053-1 1658022-1 2-1658022-1 1658053-2 2-1658053-2 1658022-2 2-1658022-2 1658053-3 2-1658053-3 1658022-3 2-1658022-3 1658053-4 2-1658053-4 1658022-4 2-1658022-4 1658053-5 2-1658053-5 1658022-5 2-1658022-5 4-1658053-1 6-1658053-1 4-1658022-1 6-1658022-1 4-1658053-2 6-1658053-2 4-1658022-2 6-1658022-2 4-1658053-3 6-1658053-3 4-1658022-3 6-1658022-3 Note: All part numbers are RoHS compliant. 57 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 8.00 [.315] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 0.20 Typ. [.008] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 7.11 Ref. [.280] 0.08 7.27 +- 0.05 + .003 [.286 - .002 ] D A Note: Parts are available with vacuum dots for robotic placement. A TOL D 0.94 [.037] 0.95 [.038] Section A-A 0.95 [.038] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 0.64 Typ. [.025] MICTOR SB Interconnection System Orientation Hole 2 Plcs. E Spaces at 20.00 [.788] = F 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 0.728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658054-1 2-1658054-1 1658023-1 2-1658023-1 1658054-2 2-1658054-2 1658023-2 2-1658023-2 1658054-3 2-1658054-3 1658023-3 2-1658023-3 1658054-4 2-1658054-4 1658023-4 2-1658023-4 1658054-5 2-1658054-5 1658023-5 2-1658023-5 4-1658054-1 6-1658054-1 4-1658023-1 6-1658023-1 4-1658054-2 6-1658054-2 4-1658023-2 6-1658023-2 4-1658054-3 6-1658054-3 4-1658023-3 6-1658023-3 Note: All part numbers are RoHS compliant. 58 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 11.00 [.433] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 [.265] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 10.26 +- 0.03 + .003 [.404 - .001 ] 0.95 [.038] D Note: Parts are available with vacuum dots for robotic placement. A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 0.64 Typ. [.025] E Spaces at 20.00 [.788] = F MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 0.728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658055-1 2-1658055-1 1658024-1 2-1658024-1 1658055-2 2-1658055-2 1658024-2 2-1658024-2 1658055-3 2-1658055-3 1658024-3 2-1658024-3 1658055-4 2-1658055-4 1658024-4 2-1658024-4 1658055-5 2-1658055-5 1658024-5 2-1658024-5 4-1658055-1 6-1658055-1 4-1658024-1 6-1658024-1 4-1658055-2 6-1658055-2 4-1658024-2 6-1658024-2 4-1658055-3 6-1658055-3 4-1658024-3 6-1658024-3 Note: All part numbers are RoHS compliant. 59 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 14.00 [.551] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 [.265] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 0.20 Typ. [.008] A 7.14 Ref. [.281] 0.08 13.27 +- 0.03 + .003 [.522 - .001 ] D Note: Parts are available with vacuum dots for robotic placement. 0.95 [.038] A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 MICTOR SB Interconnection System 0.64 Typ. [.025] Orientation Hole 2 Plcs. E Spaces at 20.00 [.788] = F 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 0.728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658056-1 2-1658056-1 1658025-1 2-1658025-1 1658056-2 2-1658056-2 1658025-2 2-1658025-2 1658056-3 2-1658056-3 1658025-3 2-1658025-3 1658056-4 2-1658056-4 1658025-4 2-1658025-4 1658056-5 2-1658056-5 1658025-5 2-1658025-5 4-1658056-1 6-1658056-1 4-1658025-1 6-1658025-1 4-1658056-2 6-1658056-2 4-1658025-2 6-1658025-2 4-1658056-3 6-1658056-3 4-1658025-3 6-1658025-3 Note: All part numbers are RoHS compliant. 60 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 16.00 [.630] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 [.265] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 15.24 +- 0.03 + .003 [.600 - .001 ] D Note: Parts are available with vacuum dots for robotic placement. A TOL D 0.94 [.037] 0.95 [.038] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 0.64 Typ. [.025] E Spaces at 20.00 [.788] = F MICTOR SB Interconnection System Orientation Hole 2 Plcs. 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 60 Tape & Reel 120 180 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 20.02 .788 40.01 1.575 60.02 2.363 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 14.50 0.571 34.51 1.359 54.51 2.146 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 18.49 0.728 38.48 1.515 58.50 2.303 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 0.10 .004 0.10 .004 0.10 .004 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 0.00 .000 20.00 .788 40.00 1.575 1 2 3 4 0 1 2 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658057-1 2-1658057-1 1658026-1 2-1658026-1 1658057-2 2-1658057-2 1658026-2 2-1658026-2 1658057-3 2-1658057-3 1658026-3 2-1658026-3 1658057-4 2-1658057-4 1658026-4 2-1658026-4 1658057-5 2-1658057-5 1658026-5 2-1658026-5 4-1658057-1 6-1658057-1 4-1658026-1 6-1658026-1 4-1658057-2 6-1658057-2 4-1658026-2 6-1658026-2 4-1658057-3 6-1658057-3 4-1658026-3 6-1658026-3 Note: All part numbers are RoHS compliant. 61 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 19.00 [.748] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 [.265] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 0.20 Typ. [.008] 7.14 Ref. [.281] A 0.08 18.24 +- 0.03 + .003 [.718 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] TOL D 0.94 [.037] A Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 MICTOR SB Interconnection System 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658058-1 -- 1658027-1 -- 1658058-2 -- 1658027-2 -- 1658058-3 -- 1658027-3 -- 1658058-4 -- 1658027-4 -- 1658058-5 -- 1658027-5 -- Note: All part numbers are RoHS compliant. 62 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 22.00 [.866] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 0.04 [.265 .002] 0.20 Typ. [.008] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 7.14 Ref. [.281] A 0.08 21.23 +- 0.03 + .003 [.836 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 Orientation Hole 2 Plcs. MICTOR SB Interconnection System 0.64 Typ. [.025] 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658059-1 -- 1658028-1 -- 1658059-2 -- 1658028-2 -- 1658059-3 -- 1658028-3 -- 1658059-4 -- 1658028-4 -- 1658059-5 -- 1658028-5 -- Note: All part numbers are RoHS compliant. 63 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) 0.50 [.020] Centerline 25.00 [.984] Stack Height Plugs A Ref. B 20.00 Typ. [.788] 5.97 [.235] Position No. 1 6.73 [.265] 0.20 Typ. [.008] 29 Spaces at 0.50 [.020] Typ. = 14.50 [.571] 7.14 Ref. [.281] A 0.08 24.24 +- 0.03 + .003 [.954 - .001 ] Note: Parts are available with vacuum dots for robotic placement. D 0.95 [.038] A TOL D 0.94 [.037] Section A-A 1.33 [.053] C O 0.89 Ref. [.035] 16.89 [.665] MICTOR SB Interconnection System 1.45 [.057] 6.35 [.250] 5.28 [.208] 0.30 Typ. [.012] Pad Position No. 2 0.64 Typ. [.025] Orientation Hole 2 Plcs. 3.10 [.122] 1.05 2 Plcs. [.041] Position No. 1 E Spaces at 20.00 [.788] = F B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Packaging Type No. of Positions 60 120 Tray 180 240 300 A B 20.02 .788 40.01 1.575 60.02 2.363 80.01 3.150 100.03 3.938 14.50 .571 34.51 1.359 54.51 2.146 74.51 2.934 94.51 3.721 Dimensions C D 18.49 .728 38.48 1.515 58.50 2.303 78.49 3.090 98.50 3.878 0.10 .004 0.10 .004 0.10 .004 0.15 .006 0.15 .006 E F 0 0.00 .000 20.00 .788 40.00 1.575 60.01 2.362 80.01 3.150 1 2 3 4 Gold Flash Plating Vacuum Dots Without With 10 Gold Plating Vacuum Dots Without With 1658060-1 -- 1658029-1 -- 1658060-2 -- 1658029-2 -- 1658060-3 -- 1658029-3 -- 1658060-4 -- 1658029-4 -- 1658060-5 -- 1658029-5 -- Note: All part numbers are RoHS compliant. 64 Catalog 65194 Revised 6-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208