60 www.calmark.com •800-854-7086
SERIES 125/126 AND 165/166 - RETAINERS
Calmark offers the Series 125/126 Card
Retainer as the economical approach to
protecting your Printed Circuit Board in
shock and vibration applications. For
those applications that require shock
and vibration protection and heat
sinking and grounding, the Series
165/166 may be the answer to your
problem. The Series 125/126 is made
from rugged stainless steel while the
Series 165/166 is made from Alloy 10
BeCu for exceptional thermal and
electrical conductivity. These Retainers
conform to DSCC 85034.
125/126
Material:
.41 (.016) thick Stainless Steel
Type 301, Cond. 1/2 H, ASTM -A240
Finish:
Passivate per MIL -S-5002
SPRING RATE
60.4N/cm (34.5lbs/in) of deflection
per spring finger
WEIGHT
.4g/cm (.036oz/inch)
165/166
Material:
.41 (.016) thick Alloy 10
Beryllium Copper.
Cond. "AT" per Mil-C-81021
Finish:
See Part No. Code
SPRING RATE
56.0N/cm (32lbs/in) of
deflection per spring finger
WEIGHT
.48g/cm (.043oz/in)
Series 125/126/165/166 retainers
125, 126, 165, 166
125 -06 -3.25 N
PCB Thickness
1.6 (.063) ________________ 06
2.4 (.094) ________________ 09
Length
31.75 (1.25) to 311.15 (12.25)
length.xx
in 25.4 (1.00) increments.
Other lengths available on request
Finish (165/166 only)
Nickel plate __________________________N
or choose from Finish Table
Part Number Code
Series
Part Number Code Example:
125-06-4.25
Series 125 passivated stainless steel, 107.95
(4.25) long designed for 1.6 (.063) thick
printed circuit boards.
FINISH TABLE
Code
Letter Finish
[blank]
125/126: passivated
165/166: no finish
For 165/166 only
“T” Bright Tin plate per Mil-T-10727
.005 (.0002) min.
“N” Nickel plate per QQ-N-290 Cl. 1, Gr. F
“ZN” Zinc plate per ASTM-B633 Type III
(clear), SC1
“EN” Electroless nickel plate per
Mil-C-26074 Cl. 1 Gr. B
.64 (.025) R
(inside) Typ .
Series 125/126 = 3.18 (.125)
Series 165/166 = 4.19 (.165)
18.3 (.72)
Typ. 7.1 (.28) Typ . B
(see table)
Series 125/126 = 2.54 (.100)
Series 165/166 = 3.56 (.140)
4.32 ± .13
(.170 ± .005)
2.44 ± .05 (.96 ± .002) Dia.Typ. 25.40 ± .13
(1.000 ± .005)
Tol. Noncum.
6.73
(.265)
.8
(.03)
Typ.
3.18
(.125)
Typ.
G
(see table)
19.05 (.750) Typ.
4.19 (.165)
Typ.
8.18 +.25/-.50
(.322 +.010/-.020)
Units: mm (in))
.xx=±.25, .x=±.5
(.xxx=±.010, .xx=±.02)
125/165 Shown
126/166 Opposite
Length
Printed Circuit Board
4.32 ± .13
(.170 ± .005)
Recommended
Mounting Dim
Break sharp edges.
Dash
No.
PCB
Thickness
B Dimension
+0.38 (.015)
\-0.0 (.000)
G Dimension
+0.0 (.00)
\-0.80 (.03)
-06 1.6 (1/16) 1.91 (.075) 1.14 (.045)
-09 2.4 (3/32) 2.67 (.105) 1.91 (.075)
Mounting holes are offset
from card path and occur
every inch, offering a
choice of mounting patterns
Independent
sections maximize
contact with
printed circuit card
Turned in tabs and
rigid wall limit card
excursion under
dynamic loading
Spring fingers hold
card against rigid
side providing
dampening under
shock and vibration
Coined edges allow
smooth insertion
and extraction
without damage
to card
