Ordering number : ENN7504 15C01C NPN Epitaxial Planar Silicon Transistor 15C01C Low-Frequency General-Purpose Amplifier Applications Applications Package Dimensions Low-frequency Amplifier, muting circuit. unit : mm 2018B * * 0.4 3 0.16 0 to 0.1 1 0.95 0.95 2 1.9 2.9 1 : Base 2 : Emitter 3 : Collector 0.8 1.1 * Large current capacitance. Low collector-to-emitter saturation voltage (resistance). RCE (sat) typ.=0.58 [IC=0.7A, IB=35mA]. Ultrasmall package facilitates miniaturization in end products. Small ON-resistance (Ron). 1.5 2.5 * 0.5 [15C01C] Features 0.5 * SANYO : CP Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 20 Collector-to-Emitter Voltage VCEO 15 V Emitter-to-Base Voltage VEBO 5 V Collector Current IC ICP PC Collector Current (Pulse) Collector Dissipation Junction Temperature Tj Storage Temperature Tstg 700 Mounted on a glass epoxy board (20301.6mm) V mA 1.4 A 300 mW 150 C --55 to +150 C Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO Emitter Cutoff Current DC Current Gain Conditions Ratings min typ max Unit VCB=15V, IE=0 0.1 A VEB=4V, IC=0 0.1 A hFE fT VCE=2V, IC=10mA Gain-Bandwidth Product VCE=2V, IC=50mA 330 Output Capacitance Cob VCB=10V, f=1MHz 3.2 IC=200mA, IB=10mA IC=200mA, IB=10mA 150 300 mV 0.9 1.2 V Collector-to-Emitter Saturation Voltage VCE(sat) Base-to-Emitter Saturation Voltage VBE(sat) 300 Marking : YP 800 MHz pF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O3003 TS IM TA-3682 No.7504-1/4 15C01C Continued from preceding page. Parameter Symbol Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage V(BR)CBO V(BR)CEO IC=10A, IE=0 IC=1mA, RBE= Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10A, IC=0 See specified Test Circuit. Turn-ON Time ton tstg Storage Time Fall Time Ratings Conditions tf min typ Unit max 20 V 15 V 5 V 30 ns See specified Test Circuit. 77 ns See specified Test Circuit. 40 ns Switching Time Test Circuit IB1 PW=20s D.C.1% OUTPUT IB2 INPUT RB VR RL 50 + 220F + 470F VBE= --5V VCC=5V IC=20IB1= --20IB2=500mA IC -- VCE 200 mA 0.9 0.5mA 120 0.4mA 100 0.3mA 80 0.2mA 60 0.1mA 40 500 400 300 200 100 20 IB=0 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Collector-to-Emitter Voltage, VCE -- V 1.8 0 2.0 3 Ta=75C --25C 2 100 7 5 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 1000 IT05492 0.4 0.6 0.8 1.0 1.2 IT05491 VCE(sat) -- IC 1000 IC / IB=20 7 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 25C 5 0.2 Base-to-Emitter Voltage, VBE -- V VCE=2V 7 3 1.0 0 IT05490 hFE -- IC 1000 DC Current Gain, hFE 600 Ta= 75 C 25C --25 C 0.6mA Collector Current, IC -- mA 700 160 140 VCE=2V 0.7mA 1.0mA Collector Current, IC -- mA 180 IC -- VBE 800 A 0.8m 5 3 2 100 C 75 C 5 --2 7 = Ta 5 3 25 C 2 10 1.0 2 3 5 7 10 2 3 5 7 100 Collector Current, IC -- mA 2 3 5 7 1000 IT05493 No.7504-2/4 15C01C VCE(sat) -- IC 1000 5 3 2 C 75 5C --2 C 25 100 = Ta 7 5 3 2 10 1.0 2 3 5 7 10 2 3 5 7 100 2 3 3 2 5 7 1.0 2 3 5 7 2 10 Collector-to-Base Voltage, VCB -- V 2 2 3 5 7 10 2 3 5 7 100 2 5 7 1000 IT05495 fT -- IC VCE=2V 5 3 2 100 7 5 1.0 3 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 IT05496 Collector Current, IC -- mA PC -- Ta OUT Collector Dissipation, PC -- mW 1k 2 IB 3 2 1.0 7 5 3 300 M ou nt 250 ed on ag las se 200 po xy 150 bo ar d( 100 20 30 1. 6m m ) 50 2 0.1 0.1 3 Collector Current, IC -- mA 350 IN 10 7 5 3 IT05497 1k 3 25C 100 1.0 Ron -- IB f=1MHz 75C 5 7 5 3 7 IT05494 7 2 Ta= --25C 1000 Gain-Bandwidth Product, fT -- MHz Output Capacitance, Cob -- pF 2 f=1MHz 1.0 0.1 ON-resistance, Ron -- 3 Cob -- VCB 10 100 7 5 5 5 7 1000 Collector Current, IC -- mA IC / IB=20 7 Base-to-Emitter Saturation Voltage, VBE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 7 VBE(sat) -- IC 10000 IC / IB=50 0 2 3 5 7 1.0 2 Base Current, IB -- mA 3 5 7 10 IT06067 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT05499 No.7504-3/4 15C01C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS No.7504-4/4