USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model K100N50X4B
Features:
RoHS Compliant
100 Watts
DC – 4.0 GHz
AlN Ceramic
Non-Nichrome Resistive
Element
Low VSWR
100% Tested
Half Flange Termination
100 Watts, 50
Description
The K100N50X4B is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element Thick Film
Substrate AlN Ceramic
Mounting Flange Copper, nickel plated per QC-N-290
Operating Temperature -55°C to +150°C (see de rating chart)
Tolerance is
0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: 50 Ohms, 2%
Power: 100 Watts
Frequency Range: DC – 4.0 GHz
Return Loss > 26 dB to 1.3 GHz
> 22 dB to 4.0GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change with out notice.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
LEAD LENGTH: 0.150” MIN
1 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model K100N50X4B
Typical Performance:
0.00 1.00 2.00 3.00
4.00
Freq (GHz)
-50.00
-45.00
-40.00
-35.00
-30.00
-25.00
-20.00
-15.00
-10.00
-5.00
0.00
Return Loss (dB)
2.001.000.50
1.00
-1.00
0.50
-0.50
0.20
-0.20
0.00 0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
-170
-160
-150
-140
-130
-120
-110 -100 -90 -80 -70
-60
-50
-40
-30
-20
-10
Smith Chart 1
Power De-rating: Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the
application
2 of 2
