SMD Wire-wound Chip Inductors ctparts.com
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US 949-453-1811 Outside US
Copyright © 2003 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
CENTRAL
Technologies
12.14.01
PHYSICAL DIMENSIONS
PAD LAYOUT
Size A B C D E F
Max. Max. Max.
mm 2.55 2.38 2.1 2 0.5 1.43
inches 0.1 0.09 0.08 0.08 0.02 0.06
SPECIFICATIONS
Please specify tolerance code when ordering.
CT1008HS-330_ G = ±2%, J = ±5%, K = ±10%, M = ±20%
* M also (all other values are G, J, K only)
L T est Q Q T est SRF DCR Rated
Part Inductance Freq. Fact. Freq. Min. Max. DC
Number (nH) (MHz) Min. (MHz) (MHz) (Ω
Ω) (mA)
CT1008HS-100_* 10 50 60 500 4100 .05 1000
CT1008HS-120_* 12 50 60 500 3300 .09 1000
CT1008HS-150_* 15 50 60 500 2500 .13 1000
CT1008HS-180_* 18 50 60 350 2500 .08 1000
CT1008HS-220_* 22 50 60 350 2400 .13 1000
CT1008HS-270_ 27 50 65 350 1600 .12 1000
CT1008HS-330_* 33 50 65 350 1600 .14 1000
CT1008HS-390_* 39 50 65 350 1500 .15 1000
CT1008HS-470_ 47 50 68 350 1500 .16 1000
CT1008HS-560_ 56 50 68 350 1300 .18 1000
CT1008HS-680_ 68 50 68 350 1300 .21 1000
CT1008HS-820_ 82 50 68 350 1200 .22 1000
CT1008HS-101_ 100 25 62 350 1000 .35 750
CT1008HS-121_ 120 25 62 350 950 .38 750
CT1008HS-151_ 150 25 46 100 850 .40 750
CT1008HS-181_ 180 25 48 100 750 .42 750
CT1008HS-221_ 220 25 48 100 700 .54 600
CT1008HS-271_ 270 25 48 100 600 .50 600
CT1008HS-331_ 330 25 48 100 570 .70 550
CT1008HS-391_ 390 25 48 100 500 .72 550
CT1008HS-471_ 470 25 48 100 450 .95 520
CT1008HS-561_ 560 25 48 100 415 1.2 420
CT1008HS-621_ 620 25 48 100 375 1.3 320
CT1008HS-681_ 680 25 48 100 375 1.4 400
CT1008HS-751_ 750 25 48 100 360 1.5 370
CT1008HS-821_ 820 25 48 100 350 1.5 400
CT1008HS-911_ 910 25 48 50 330 2.0 350
CT1008HS-102_ 1000 25 44 50 310 2.1 340
CT1008HS Series
From 10 nH to 1,000 nH
Not shown at actual size.
CHARACTERISTICS
Description: SMD ceramic core wire-wound chip inductor
Applications: LC resonant circuits such as oscillator and signal
generators, impedance matching, circuit isolation, RF filters, disk
drives and computer peripherals, audio and video equipment, TV,
radio and telecommunication equipment
Operating T emperature: -40°C to +125°C
Inductance T olerance: ±2%, ±5%, ±10%, ±20%
Testing: Inductance and Q are tested on an HP4286A or
HP4287A at specified frequency
Packaging: Tape & Reel
Marking: Reels are marked with inductance code and tolerance
Coated: Epoxy resin on top of the part to per manently set the coil
Miscellaneous: Par ts are also available with a clear plastic cap.
Other values available
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
