https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type socket, 8-pos., M12 SPEEDCON, rear/screw mounting with Pg9 thread, with straight solder connection Your advantages Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 pc Minimum order quantity 20 pc GTIN GTIN 4046356856348 Weight per Piece (excluding packing) 12.000 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Length of the solder pin 12 mm Ambient conditions Ambient temperature (operation) -25 C ... 85 C (Plug / socket) -40 C ... 85 C (without mechanical actuation) -25 C ... 85 C (Plug / socket) 10/25/2020Page1/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Technical data Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC61076-2-101 Overvoltage category III Degree of pollution 3 Test voltage 0.8 kV Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Thread type Pg9 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material FKM Cable Standards/specifications M12 connector IEC61076-2-101 Ambient temperature (operation) -40 C ... 85 C (cable, fixed installation) -25 C ... 85 C (cable, flexible installation) Standards and Regulations Standards/specifications M12 connector IEC61076-2-101 Flammability rating according to UL 94 V0 10/25/2020Page2/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Schematic diagram Pin assignment M12 socket, 8-pos., A-coded, view female side 10/25/2020Page3/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Dimensional drawing Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) 10/25/2020Page4/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Drilling diagram 10/25/2020Page5/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Dimensional drawing M12 flush-type connector Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 10/25/2020Page6/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Classifications ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Nominal voltage UN 30 V Nominal current IN 2A mm/AWG/kcmil 24 FILE E 118976 10/25/2020Page7/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Approvals EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616 Nominal voltage UN 30 V Nominal current IN 2A mm/AWG/kcmil 24-22 Accessories Accessories Plug for cable screw gland Screw plug-PROT-M12-1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors Screw plug-PROT-M12 SH-1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors Screw plug-PROT-M12 FB-1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry 10/25/2020Page8/9 https://www.phoenixcontact.com/us/products/1408770 Panel feed-through-SACC-DSI-FS-8CON-L180/12 SCO-1408770 Accessories Seal Flat gasket-SACC-PG9-SEAL CLM-1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 10/25/2020Page9/9