3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System, 26 Position 14526-EZLB-XXX-0SC * Solution for high speed datacom and telecom applications * Eight shielded differential pairs plus two conductors for high bandwidth applications * Each differential pair has a foil shield and drain * Entire cable is shielded with a foil and braid for additional signal protection * Rugged MDR ribbon type contacts * Quick release latches * RoHS* compliant Date Modified: May 29, 2006 TS-0967-04 Sheet 1 of 3 Physical Connector Contact Plating Wiping Area: 30 [ .76 m ] Min Gold Shell Color: Beige Shell Material: Acrylonitrile Butadiene Styrene (ABS) Cable Color: Beige Cable Jacket Material: Polyvinyl Chloride (PVC) Cable Flammability: AWM VW-1 Electrical Voltage Rating: 30 V Current Rating: 1 A Insulation Resistance: > 1 x 108 at 100 VDC Withstanding Voltage: 350 Vrms for 1 minute Individually Shielded Twisted Pairs Characteristic Impedance: 100 10 Conductor Size: 28 AWG Stranded Propogation Velocity: 1.25 ns/ft [4.1 ns/m ] Environmental Temperature Rating: -20C to +75C *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E86982 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System, 26 Position 14526-EZLB-XXX-0SC 26 Position High Density Mini D Ribbon (MDR) Male Plug 26 Position High Density Mini D Ribbon (MDR) Male Plug Cable (See wiring diagram for cable construction) 2X Squeeze Release Latches 2X Squeeze Release Latches 41.9 1.7 41.9 1.7 LENGTH (See ordering information) 33.5 1.3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 11.5 0.5 MDR 26 Position Plug ( Both Ends ) mm [Inch] Assembly Length Tolerance Tolerance Unless Noted mm 0.0 0.00 .1 .10 Cable Length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length [ ] Dimensions for Reference only Ordering Information 14526-EZLB-XXX-0SC Length: 050 = .5 meters 100 = 1 meters 150 = 1.5 meters 200 = 2 meters 250 = 2.5 meters 300 = 3 meters 350 = 3.5 meters 3M Interconnect Solutions http://www.3M.com/interconnects/ 400 = 4 meters 500 = 5 meters 600 = 6 meters 700 = 7 meters 800 = 8 meters 900 = 9 meters A00 = 10 meters TS-0967-04 Sheet 2 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Mini D Ribbon (MDR) Cable Assembly .050 High Speed Digital Data Transmission System, 26 Position 14526-EZLB-XXX-0SC MDR 26 Position, Pinout F26-26 rev 1 Transmitter (Tx) 3M MDR SMT Receptacle 1 ATxOut014 ATxOut0Gnd 2 ATxOut0+ 15 ATxOut13 ATxOut1Gnd 16 ATxOut1+ 4 ATxOut217 ATxOut2Gnd 5 ATxOut2+ 18 ATxClkOut6 ATxClkOutGnd 19 ATxClkOut+ 7 CTL_1 20 CTL_2 8 BTxOut021 BTxOut0Gnd 12 BTxOut2+ 3M Interconnect Solutions http://www.3M.com/interconnects/ 12 ARxIn124 ARxIn1Gnd 11 ARxIn1+ 23 ARxIn210 ARxIn2Gnd 22 ARxIn2+ 9 ARxClkIn21 ARxClkInGnd 8 ARxClkIn+ 20 CTL_1 7 CTL_2 19 BRxIn06 BRxIn0Gnd 5 BRxIn1- 24 BTxOut2Gnd 28 AWG insulated conductor 25 ARxIn0+ 22 BTxOut1- 11 BTxOut2- * 13 ARxIn0Gnd 18 BRxIn0+ 23 BTxOut1+ 100 Ohm balanced individually shielded twisted pair w/drain 26 ARxIn0- 9 BTxOut0+ 10 BTxOut1Gnd Symbols Key: Cable Receiver (Rx) 3M MDR SMT Receptacle 25 BTxClkOut13 BTxClkOutGnd 26 BTxClkOut+ 17 BRxIn1Gnd 4 BRxIn0+ 16 BRxIn23 BRxIn2Gnd 15 BRxIn2+ 2 BRxClkIn14 BRxClkInGnd 1 BRxClkIn+ TS-0967-04 Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2006 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: 14526-EZLB-200-0SC