Lineup of Fiber Amplifiers for A Wide Range of Applications Standard Models (Typical model: E3X-DA21-S) NEW Pre-wired Models NEW Models with Connectors* Full Color Models (Typical model: E3X-DAC11-S) Two-channel Models (Typical model: E3X-MDA11) Previous Models (Typical model: E3X-DA11-S) Order Information Pre-wired Models Appearance Models with Connectors* Functions Model NPN output PNP output Appearance Functions * Timer * Timer * Tough Mode * Tough Mode * Differential operation * Differential operation * External input E3X-DA21-S 2M E3X-DA51-S 2M * Twin output * Twin output * Self-diagnosis * Self-diagnosis * ATC Model NPN output PNP output E3X-DA7-S E3X-DA9-S * ATC * The applicable connectors are the E3X-CN21 (master connector with four conductors) and E3X-CN22 (slave connector with two conductors). 7 Ratings and Specifications Item Model E3X-DA-S (: 21/51/7/9) Light source (wavelength) Red LED (625 nm) Power supply voltage 12 to 24 VDC 10%, ripple (p-p) 10% max. Power consumption Normal: 960 mW max. (Current consumption: 40 mA max. at 24 VDC, 80 mA max. at 12 VDC) Power saving ECO1: 720 mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC) Power saving ECO2: 600 mW max. (Current consumption: 25 mA max. at 24 VDC, 50 mA max. at 12 VDC) Control output Load power supply voltage: 26.4 VDC max.; Open-collector output (models available for NPN or PNP output); Load current: 50 mA max. (Residual voltage: 2 V max.); OFF current: 0.5 mA max. External input No-voltage input (contacts/transistor) *1 *2 Protection circuits Reverse polarity for power supply connection, output short-circuit, Reversed output polarity protection Response time (operate and reset) Super-high-speed Mode *3: 80 s; High-speed Mode: 250 s; Standard Mode: 1 ms; High-resolution mode: 4 ms; Tough Mode: 16 ms Sensitivity adjustment Teaching or manual method Power tuning Light emission power and reception gain, digital control method Differential detection Switchable between single edge and double edge detection mode Single edge: Can be set to 250 s, 500 s, 1 ms, 10 ms, or 100 ms. Double edge: Can be set to 500 s, 1 ms, 2 ms, 20 ms, or 200 ms. Timer function Select from OFF-delay, ON-delay, one-shot, or ON-delay + OFF-delay timer. 1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 5-ms increments, 200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) Automatic power control (APC) High-speed control method for emission current ATC (Automatic Threshold Compensation) Supported Zero-reset Negative displays are possible. (The threshold value also shifts.) Resetting settings Select from initial reset (factory defaults) or user reset (saved settings). Functions Mutual interference Up to 10 Units prevention ECO mode *5 External input setting *1 Output setting Display *4 Select from lit display, dimmed display, or OFF. Select from teaching operations, power tuning, zero reset, emitter OFF, or ATC start. Select from output for each channel, area output, or self-diagnosis. Operation indicator for channel 1 (orange), Operation indicator for channel 2 (orange) *1. Only for pre-wired models. *2. Refer to the datasheet (Cat. No. E336) for details on the input. *3. The communications function and mutual interference prevention function are disabled if detection is set to Super-high-speed Mode. *4. Mutual interference prevention can be used for only up to 6 Units if power tuning is enabled. *5. When the ECO Mode is enabled, the rated sensing distance is approx. 1/2 and the incident level is approx. 1/3 of the normal levels. Note: The E3X-MC11-SV2 Mobile Console does not currently support the new Tough Mode and ON-delay + OFF-delay timer. You also cannot use the E3X-MC11-S. Sensing Distance (Typical Examples) Type Throughbeam Flexible Standard Flexible Retroreflective Model Tough Mode High-resolution Mode Standard Mode High-speed Mode Super-high-speed Mode E32-T11R *1 2,000 1,400 1,000 700 280 E32-T21R *2 450 300 250 150 60 2,800 2,000 1,550 1,000 400 100 E32-TC200 *1 E32-D11R *3 840 600 350 240 E32-D21R *2 140 100 60 40 16 1,400 1,000 600 400 180 Standard E32-DC200 Co-axial and flexible E32-CC200R Co-axial E32-CC200 E32-C31 *3 *3 *3 *2 700 500 300 200 90 1,400 1,000 600 400 180 330 240 150 100 44 *1. The appearance is same as models with M4 screws. *2. The appearance is same as models with M3 screws. *3. The appearance is same as models with M6 screws. OMRON ELECTRONICS LLC * THE AMERICAS HEADQUARTERS * Schaumburg, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE OMRON ELECTRONICS MEXICO SA DE CV * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 * www.omron.ca Apodaca, N.L. * 52.811.156.99.10 * 001.800.556.6766 * mela@omron.com OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br E30I-E-01 Note: Specifications are subject to change. (c) 2009 Omron Electronics LLC Printed on recycled paper. Printed in U.S.A.