BZM55-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES * Saving space * Hermetic sealed parts * Electrical data identical with the devices BZT55..series, TZM..series * Fits onto SOD-323 * Very sharp reverse characteristic * Low reverse current level * Very high stability PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 75 V Test current IZT 2.5; 5 mA VZ specification Pulse current Int. construction Single * Low noise * AEC-Q101 qualified * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC * Halogen-free according to IEC 61249-2-21 definition APPLICATIONS * Voltage stabilization ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY BZM55-series BZM55-series-TR3 10 000 (8 mm tape on 13" reel) 10 000 BZM55-series BZM55-series-TR 2500 (8 mm tape on 7" reel) 12 500 PACKAGE PACKAGE NAME MicroMELF WEIGHT 12 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER Power dissipation Junction to ambient air Junction tie point TEST CONDITION SYMBOL VALUE UNIT RthJA 300 K/W Ptot 500 mW Mounted on epoxy-glass hard tissue, fig. 1 RthJA 500 K/W 35 m copper clad, 0.9 mm2 copper area per electrode RthJL 300 K/W Tj 175 C Tstg - 65 to + 175 C IZ Ptot/VZ mA VF 1.5 V Junction temperature Storage temperature range Zener current Forward voltage Rev. 2.1, 25-Nov-11 IF = 200 mA Document Number: 85597 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZM55-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE (1) TEST CURRENT REVERSE LEAKAGE CURRENT IR at VR VZ at IZT1 PART NUMBER IZT1 V IZT2 DYNAMIC RESISTANCE ZZ at IZT1 at Tamb = at Tamb = 25 C 125 C mA A TEMPERATURE COEFFICIENT ZZK at IZT2 TKVZ f = 1 kHz V %/K MIN. NOM. MAX. MAX. MAX. MIN. BZM55C2V4 2.28 2.4 2.56 5 1 < 50 MAX. BZM55C2V7 2.5 2.7 2.9 5 1 BZM55C3V0 2.8 3.0 3.2 5 1 BZM55C3V3 3.1 3.3 3.5 5 BZM55C3V6 3.4 3.6 3.8 5 BZM55C3V9 3.7 3.9 4.1 5 1 <2 < 40 1 < 90 < 600 - 0.08 - 0.05 BZM55C4V3 4 4.3 4.6 5 1 <1 < 20 1 < 90 < 600 - 0.06 - 0.03 < 100 1 < 85 < 600 - 0.09 - 0.06 < 10 < 50 1 < 85 < 600 - 0.09 - 0.06 <4 < 40 1 < 90 < 600 - 0.08 - 0.05 1 <2 < 40 1 < 90 < 600 - 0.08 - 0.05 1 <2 < 40 1 < 90 < 600 -0.08 - 0.05 BZM55C4V7 4.4 4.7 5 5 1 < 0.5 < 10 1 < 80 < 600 - 0.05 0.02 BZM55C5V1 4.8 5.1 5.4 5 1 < 0.1 <2 1 < 60 < 550 - 0.02 0.02 BZM55C5V6 5.2 5.6 6 5 1 < 0.1 <2 1 < 40 < 450 - 0.05 0.05 BZM55C6V2 5.8 6.2 6.6 5 1 < 0.1 <2 2 < 10 < 200 0.03 0.06 BZM55C6V8 6.4 6.8 7.2 5 1 < 0.1 <2 3 <8 < 150 0.03 0.07 BZM55C7V5 7 7.5 7.9 5 1 < 0.1 <2 5 <7 < 50 0.03 0.07 BZM55C8V2 7.7 8.2 8.7 5 1 < 0.1 <2 6.2 <7 < 50 0.03 0.08 BZM55C9V1 8.5 9.1 9.6 5 1 < 0.1 <2 6.8 < 10 < 50 0.03 0.09 BZM55C10 9.4 10 10.6 5 1 < 0.1 <2 7.5 < 15 < 70 0.03 0.1 BZM55C11 10.4 11 11.6 5 1 < 0.1 <2 8.2 < 20 < 70 0.03 0.11 BZM55C12 11.4 12 12.7 5 1 < 0.1 <2 9.1 < 20 < 90 0.03 0.11 BZM55C13 12.4 13 14.1 5 1 < 0.1 <2 10 < 26 < 110 0.03 0.11 BZM55C15 13.8 15 15.6 5 1 < 0.1 <2 11 < 30 < 110 0.03 0.11 BZM55C16 15.3 16 17.1 5 1 < 0.1 <2 12 < 40 < 170 0.03 0.11 BZM55C18 16.8 18 19.1 5 1 < 0.1 <2 13 < 50 < 170 0.03 0.11 BZM55C20 18.8 20 21.2 5 1 < 0.1 <2 15 < 55 < 220 0.03 0.11 BZM55C22 20.8 22 23.3 5 1 < 0.1 <2 16 < 55 < 220 0.04 0.12 BZM55C24 22.8 24 25.6 5 1 < 0.1 <2 18 < 80 < 220 0.04 0.12 BZM55C27 25.1 27 28.9 5 1 < 0.1 <2 20 < 80 < 220 0.04 0.12 BZM55C30 28 30 32 5 1 < 0.1 <2 22 < 80 < 220 0.04 0.12 BZM55C33 31 33 35 5 1 < 0.1 <2 24 < 80 < 220 0.04 0.12 BZM55C36 34 36 38 5 1 < 0.1 <2 27 < 80 < 220 0.04 0.12 BZM55C39 37 39 41 2.5 0.5 < 0.1 <5 30 < 90 < 500 0.04 0.12 BZM55C43 40 43 46 2.5 0.5 < 0.1 <5 33 < 90 < 600 0.04 0.12 BZM55C47 44 47 50 2.5 0.5 < 0.1 <5 36 110 < 700 0.04 0.12 BZM55C51 48 51 54 2.5 0.5 < 0.1 < 10 39 125 < 700 0.04 0.12 BZM55C56 52 56 60 2.5 0.5 < 0.1 < 10 43 135 < 1000 0.04 0.12 BZM55C62 58 62 66 2.5 0.5 < 0.1 < 10 47 150 < 1000 0.04 0.12 BZM55C68 64 68 72 2.5 0.5 < 0.1 < 10 51 200 < 1000 0.04 0.12 BZM55C75 70 75 79 2.5 0.5 < 0.1 < 10 56 250 < 1500 0.04 0.12 Notes * Additional measurement of voltage group 9V1 to 75 at 95 % Vzmin. 35 nA at Tj = 25 C (1) t 10 ms, T/t > 1000 p p Rev. 2.1, 25-Nov-11 Document Number: 85597 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZM55-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE (1) TEST CURRENT REVERSE LEAKAGE CURRENT IR at VR VZ at IZT1 PART NUMBER IZT1 V BZM55B2V4 IZT2 NOM. MAX. 2.35 2.4 2.45 5 ZZ at IZT1 at Tamb = at Tamb = 25 C 125 C mA MIN. DYNAMIC RESISTANCE A 1 < 50 ZZK at IZT2 TKVZ f = 1 kHz V < 100 TEMPERATURE COEFFICIENT 1 %/K MAX. MAX. MIN. MAX. < 85 < 600 - 0.09 - 0.06 BZM55B2V7 2.64 2.7 2.76 5 1 < 10 < 50 1 < 85 < 600 - 0.09 - 0.06 BZM55B3V0 2.94 3.0 3.06 5 1 <4 < 40 1 < 90 < 600 - 0.08 - 0.05 BZM55B3V3 3.24 3.3 3.36 5 1 <2 < 40 1 < 90 < 600 - 0.08 - 0.05 BZM55B3V6 3.52 3.6 3.68 5 1 <2 < 40 1 < 90 < 600 - 0.08 - 0.05 BZM55B3V9 3.82 3.9 3.98 5 1 <2 < 40 1 < 90 < 600 - 0.08 - 0.05 BZM55B4V3 4.22 4.3 4.38 5 1 <1 < 20 1 < 90 < 600 - 0.06 - 0.03 BZM55B4V7 4.6 4.7 4.8 5 1 < 0.5 < 10 1 < 80 < 600 - 0.05 0.02 BZM55B5V1 5 5.1 5.2 5 1 < 0.1 <2 1 < 60 < 550 - 0.02 0.02 BZM55B5V6 5.48 5.6 5.72 5 1 < 0.1 <2 1 < 40 < 450 - 0.05 0.05 BZM55B6V2 6.08 6.2 6.32 5 1 < 0.1 <2 2 < 10 < 200 0.03 0.06 BZM55B6V8 6.66 6.8 6.94 5 1 < 0.1 <2 3 <8 < 150 0.03 0.07 BZM55B7V5 7.35 7.5 7.65 5 1 < 0.1 <2 5 <7 < 50 0.03 0.07 BZM55B8V2 8.04 8.2 8.36 5 1 < 0.1 <2 6.2 <7 < 50 0.03 0.08 BZM55B9V1 8.92 9.1 9.28 5 1 < 0.1 <2 6.8 < 10 < 50 0.03 0.09 BZM55B10 9.8 10 10.2 5 1 < 0.1 <2 7.5 < 15 < 70 0.03 0.1 BZM55B11 10.78 11 11.22 5 1 < 0.1 <2 8.2 < 20 < 70 0.03 0.11 BZM55B12 11.76 12 12.24 5 1 < 0.1 <2 9.1 < 20 < 90 0.03 0.11 BZM55B13 12.74 13 13.26 5 1 < 0.1 <2 10 < 26 < 110 0.03 0.11 BZM55B15 14.7 15 15.3 5 1 < 0.1 <2 11 < 30 < 110 0.03 0.11 BZM55B16 15.7 16 16.3 5 1 < 0.1 <2 12 < 40 < 170 0.03 0.11 BZM55B18 17.64 18 18.36 5 1 < 0.1 <2 13 < 50 < 170 0.03 0.11 BZM55B20 19.6 20 20.4 5 1 < 0.1 <2 15 < 55 < 220 0.03 0.11 BZM55B22 21.55 22 22.45 5 1 < 0.1 <2 16 < 55 < 220 0.04 0.12 BZM55B24 23.5 24 24.5 5 1 < 0.1 <2 18 < 80 < 220 0.04 0.12 BZM55B27 26.4 27 27.6 5 1 < 0.1 <2 20 < 80 < 220 0.04 0.12 BZM55B30 29.4 30 30.6 5 1 < 0.1 <2 22 < 80 < 220 0.04 0.12 BZM55B33 32.4 33 33.6 5 1 < 0.1 <2 24 < 80 < 220 0.04 0.12 BZM55B36 35.3 36 36.7 5 1 < 0.1 <2 27 < 80 < 220 0.04 0.12 BZM55B39 38.2 39 39.8 2.5 1 < 0.1 <5 30 < 90 < 500 0.04 0.12 BZM55B43 42.1 43 43.9 2.5 0.5 < 0.1 <5 33 < 90 < 600 0.04 0.12 BZM55B47 46.1 47 47.9 2.5 0.5 < 0.1 <5 36 < 110 < 700 0.04 0.12 BZM55B51 50 51 52 2.5 0.5 < 0.1 < 10 39 < 125 < 700 0.04 0.12 BZM55B56 54.9 56 57.1 2.5 0.5 < 0.1 < 10 43 < 135 < 1000 0.04 0.12 BZM55B62 60.8 62 63.2 2.5 0.5 < 0.1 < 10 47 < 150 < 1000 0.04 0.12 BZM55B68 66.6 68 69.4 2.5 0.5 < 0.1 < 10 51 < 200 < 1000 0.04 0.12 BZM55B75 73.5 75 76.5 2.5 0.5 < 0.1 < 10 56 < 250 < 1500 0.04 0.12 Notes * Additional measurement of voltage group 9V1 to 75 at 95 % Vzmin. 35 nA at Tj = 25 C (1) t 10 ms, T/t > 1000 p p Rev. 2.1, 25-Nov-11 Document Number: 85597 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZM55-Series www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 200 CD - Diode Capacitance (pF) Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 95 9602 Tj = 25 C 100 50 0 5 10 15 25 20 VZ - Z-Voltage (V) 95 9601 Fig. 4 - Diode Capacitance vs. Z-Voltage Fig. 1 - Total Power Dissipation vs. Ambient Temperature 1000 1.3 VZtn - Relative Voltage Change VZ - Voltage Change (mV) VR = 2 V 0 80 120 160 200 40 Tamb - Ambient Temperature (C) 0 Tj = 25 C 100 IZ = 5 mA 10 VZtn = VZt/VZ (25 C) 1.2 TKVZ = 10 x 10-4/K 8 x 10-4/K 6 x 10-4/K 1.1 4 x 10-4/K 2 x 10-4/K 0 1.0 - 2 x 10-4/K - 4 x 10-4/K 0.9 0.8 1 0 5 10 15 20 25 - 60 0 60 120 180 240 Tj - Junction Temperature (C) 95 9599 VZ - Z-Voltage (V) 95 9598 Fig. 5 - Typical Change of Working Voltage vs. Junction Temperature Fig. 2 - Typical Change of Working Voltage under Operating Conditions at Tamb=25C 15 100 IF - Forward Current (mA) TKVZ - Temperature Coefficient of VZ (10-4/K) 150 10 5 IZ = 5 mA 0 10 Tj = 25 C 1 0.1 0.01 0.001 -5 0 95 9600 10 20 30 40 VZ - Z-Voltage (V) Fig. 3 - Temperature Coefficient of Vz vs. Z-Voltage Rev. 2.1, 25-Nov-11 0 50 95 9605 0.2 0.4 0.6 0.8 1.0 VF - Forward Voltage (V) Fig. 6 - Forward Current vs. Forward Voltage Document Number: 85597 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZM55-Series www.vishay.com Vishay Semiconductors 100 0.71 1.27 60 9.9 0.152 Ptot = 500 mW Tamb = 25 C 0.355 25 40 10 IZ - Z-Current (mA) 80 1.3 20 2.5 0 0 4 6 12 8 20 24 95 10329 VZ - Z-Voltage (V) 95 9604 Fig. 10 - Board for RthJA Definition (in mm) Fig. 7 - Z-Current vs. Z-Voltage 50 IZ - Z-Current (mA) Reflow Soldering Ptot = 500 mW Tamb = 25 C 40 30 1.2 20 10 0.8 0.8 0.8 0 15 20 25 30 35 2.4 16773 VZ - Z-Voltage (V) 95 9607 Fig. 8 - Z-Current vs. Z-Voltage Fig. 11 - Recommended Foot Pads (in mm) rZ - Differential Z-Resistance () 1000 Wave Soldering IZ = 1 mA 100 1.4 5 mA 10 10 mA 0.9 1.0 0.9 Tj = 25 C 1 0 95 9606 5 10 15 20 25 VZ - Z-Voltage (V) Fig. 9 - Differential Z-Resistance vs. Z-Voltage Rev. 2.1, 25-Nov-11 16774 2.8 Fig. 12 - Recommended Foot Pads (in mm) Document Number: 85597 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZM55-Series Zthp - Thermal Resistance for Pulse Cond. (KW) www.vishay.com Vishay Semiconductors 1000 tp/T = 0.5 100 tp/T = 0.2 Single Pulse RthJA = 300 K/W T = Tjmax - Tamb 10 tp/T = 0.01 tp/T = 0.1 tp/T = 0.02 tp/T = 0.05 iZM = (- VZ + (VZ2 + 4rzj x T/Zthp) 1/2)/(2rzj) 1 10-1 100 101 102 95 9603 tp - Pulse Length (ms) Fig. 13 - Thermal Response PACKAGE DIMENSIONS in millimeters (inches): MicroMELF 0.6 (0.024) * 1.1 (0.043) 1.2 (0.047) < 1. surface plan gl 1 (0.039) 35 ( as 0.0 s 53 ) surface plan Cathode indification 0.25 (0.010) 0.15 (0.006) > R2.5 (0.098) glass 2 (0.079) 1.8 (0.071) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: Wave soldering 2.4 (0.094) 2.8 (0.110) 0.8 (0.031) 0.9 (0.035) 0.9 (0.035) 1.4 (0.055) 1.2 (0.047) 0.8 (0.031) Reflow soldering 0.8 (0.031) 1 (0.039) Created - Date: 26.July.1996 Rev. 13 - Date: 07.June.2006 Document no.:6.560-5007.01-4 96 12072 Rev. 2.1, 25-Nov-11 Document Number: 85597 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000