DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage MBD127 BZA800AL series Quadruple ESD transient voltage suppressor Product specification 2002 Jan 11 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor FEATURES BZA800AL series PINNING * ESD rating >8 kV contact discharge, according to IEC1000-4-2 PIN * SOT353 (SC-88A) surface mount package * Common anode configuration. APPLICATIONS DESCRIPTION 1 cathode 1 2 common anode 3 cathode 2 4 cathode 3 5 cathode 4 * Computers and peripherals * Audio and video equipment * Communication systems. DESCRIPTION handbook, halfpage5 4 1 Monolithic transient voltage suppressor diode in a five lead SOT353 (SC-88A) package for 4-bit wide ESD transient suppression. 3 2 4 5 MARKING 1 2 3 MGT580 TYPE NUMBER MARKING CODE BZA856AL M1 BZA862AL M2 BZA868AL M3 Fig.1 Simplified outline (SOT353) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Per diode IZ working current Tamb = 25 C - note 1 IF continuous forward current Tamb = 25 C - 200 mA IFSM non-repetitive peak forward current tp = 1 ms; square pulse - 4 A Ptot total power dissipation Tamb = 25 C; note 2; see Fig.5 - 300 mW PZSM non repetitive peak reverse power dissipation: square pulse; tp = 1 ms; see Fig.3 BZA856AL - 16 W BZA862AL - 15 W BZA868AL - 14 W mA Tstg storage temperature -65 +150 C Tj junction temperature - 150 C Notes 1. DC working current limited by Ptot(max). 2. Device mounted on standard printed-circuit board. 2002 Jan 11 2 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA800AL series THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT Rth j-a thermal resistance from junction to ambient all diodes loaded 410 K/W Rth j-s thermal resistance from junction to solder point; one diode loaded note 1 all diodes loaded 200 K/W 185 K/W MAX. UNIT Note 1. Solder point of common anode (pin 2). ELECTRICAL CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL PARAMETER - 1.3 V BZA856AL VR = 3 V - - 1 000 nA BZA862AL VR = 4 V - - 500 nA BZA868AL VR = 4.3 V - - 100 nA working voltage IZ = 1 mA BZA856AL 5.32 5.6 5.88 V BZA862AL 5.89 6.2 6.51 V BZA868AL 6.46 6.8 7.14 V BZA856AL - - 400 BZA862AL - - 300 BZA868AL - - 200 BZA856AL - 0.3 - mV/K BZA862AL - 1.6 - mV/K BZA868AL - 2.2 - mV/K BZA856AL - - 125 pF BZA862AL - - 105 pF - - 90 pF BZA856AL - - 2.2 A BZA862AL - - 2.1 A BZA868AL - - 2 A IR reverse current SZ Cd differential resistance temperature coefficient diode capacitance IZ = 1 mA IZ = 1 mA f = 1 MHz; VR = 0 BZA868AL IZSM 2002 Jan 11 TYP. - forward voltage rdif MIN. IF = 200 mA VF VZ CONDITIONS non-repetitive peak reverse current tp = 1 ms; Tamb = 25 C 3 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor MLD790 BZA800AL series handbook, halfpage 102 handbook, halfpage IZSM PZSM 10 MLD791 (W) (A) BZA856AL BZA856AL BZA862AL 1 10 BZA862AL BZA868AL BZA868AL 10-1 10-2 10-1 1 tp (ms) 1 10-2 10 10-1 1 tp (ms) 10 PZSM = VZSM x IZSM. VZSM is the non-repetitive peak reverse voltage at IZSM. Fig.3 Fig.2 Maximum non-repetitive peak reverse power dissipation as a function of pulse duration (square pulse). Maximum non-repetitive peak reverse current as a function of pulse time. MLD792 120 MLD793 400 handbook, halfpage handbook, halfpage Ptot (mW) Cd (pF) 300 80 200 BZA856AL BZA862AL 40 BZA868AL 100 0 0 0 2 4 6 VR (V) 8 0 50 100 Tamb (C) Tj = 25 C; f = 1 MHz. Fig.4 Diode capacitance as a function of reverse voltage; typical values. 2002 Jan 11 Fig.5 Power derating curve. 4 150 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor handbook, full pagewidth ESD TESTER RZ 450 RG 223/U 50 coax CZ BZA800AL series 10x ATTENUATOR DIGITIZING OSCILLOSCOPE 50 note 1 1/4 BZA800AL IEC 61000-4-2 network CZ = 150 pF; RZ = 330 Note 1: attenuator is only used for open socket high voltage measurements vertical scale = 100 V/div horizontal scale = 50 ns/div BZA868AL vertical scale = 5 V/div horizontal scale = 50 ns/div BZA862AL BZA856AL GND unclamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped +1 kV ESD voltage waveform (IEC 61000-4-2 network) GND GND vertical scale = 100 V/div horizontal scale = 50 ns/div vertical scale = 5 V/div horizontal scale = 50 ns/div unclamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) clamped -1 kV ESD voltage waveform (IEC 61000-4-2 network) Fig.6 ESD clamping test set-up and waveforms. 2002 Jan 11 5 MLD794 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA800AL series APPLICATION INFORMATION Typical common anode application A quadruple transient suppressor in a SOT353 (SC88A) package makes it possible to protect four separate lines using only one package. A simplified example is shown in Fig 7. handbook, full pagewidth keyboard, terminal, printer, etc. A B C D I/O FUNCTIONAL DECODER BZA800AL GND MLD795 Fig.7 Computer interface protection. Device placement and printed-circuit board layout Circuit board layout is of extreme importance in the suppression of transients. The clamping voltage of the BZA800AL is determined by the peak transient current and the rate of rise of that current (di/dt). Since parasitic inductances can further add to the clamping voltage (V = L di/dt) the series conductor lengths on the printed-circuit board should be kept to a minimum. This includes the lead length of the suppression element. In addition to minimizing conductor length the following printed-circuit board layout guidelines are recommended: 1. Place the suppression element close to the input terminals or connectors 2. Keep parallel signal paths to a minimum 3. Avoid running protection conductors in parallel with unprotected conductors 4. Minimize all printed-circuit board loop areas including power and ground loops 5. Minimize the length of the transient return path to ground 6. Avoid using shared transient return paths to a common ground point. 2002 Jan 11 6 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA800AL series PACKAGE OUTLINE Plastic surface mounted package; 5 leads SOT353 D E B y X A HE 5 v M A 4 Q A A1 1 2 e1 3 bp c Lp w M B e detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 max bp c D E (2) e e1 HE Lp Q v w y mm 1.1 0.8 0.1 0.30 0.20 0.25 0.10 2.2 1.8 1.35 1.15 1.3 0.65 2.2 2.0 0.45 0.15 0.25 0.15 0.2 0.2 0.1 OUTLINE VERSION SOT353 2002 Jan 11 REFERENCES IEC JEDEC EIAJ SC-88A 7 EUROPEAN PROJECTION ISSUE DATE 97-02-28 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor BZA800AL series DATA SHEET STATUS DATA SHEET STATUS(1) PRODUCT STATUS(2) DEFINITIONS Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS DISCLAIMER(2)S Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Jan 11 8 Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor NOTES 2002 Jan 11 9 BZA800AL series Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor NOTES 2002 Jan 11 10 BZA800AL series Philips Semiconductors Product specification Quadruple ESD transient voltage suppressor NOTES 2002 Jan 11 11 BZA800AL series Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA74 (c) Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613514/01/pp12 Date of release: 2002 Jan 11 Document order number: 9397 750 09173