1
Fuseholder FEP
https://www.schurter.com /PG02
Circuit Protection
Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip
See below:
Approvals and Compliances
250 VAC · 2.5 W / 6.3 A (VDE) · 500 VAC/DC · 10 A (UL/CSA)
Description
- Screw type fuse carrier
Weblinks
pdf data sheet, html datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product, Microsite
Technical Data
Shock-Safe Category PC1
Fuse-Link 5 x 20 mm
Mounting Panel mount, Front Side
Attachment Fixing Nut
Terminal Solder / Quick-Connect 2.8 x 0.5 mm
Rated Voltage 250 VAC (VDE), 500 VAC/DC (UL/CSA)
Rated current 6.3 A (VDE), 10 A (UL/CSA)
Rated Power Acceptance IEC 2.5 W / 6.3 A @ Ta 23 °C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Degree of Protection IP42
Protection Class Suitable for appliances with protection
class I acc. to IEC 61140
Admissible Ambient Air Temp. -25 °C to 85 °C
Climatic Category 25/085/21 acc. to IEC 60068-1
Material: Socket Thermoset, black, UL 94V-0
Material: Cap Thermoplastic
Material: Terminals Copper alloy, tin-plated
Unit Weight 6.1 g / 4.6 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Rated current,
Certification marks
Soldering Methods Iron
Soldering Profile
Solderability 350 °C / 3 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Contact Resistance ≤ 10 mΩ at 100 mA
Dielectric Strength > 1 kV between life parts
(50 Hz: 1 min)
Impulse Withstand Voltage > 4 kV between life parts
Insulation Resistance ≥ 20 MΩ between life parts
(1000 VDC: 1 min)
Overvoltage Category II acc. to IEC 60664-1
Pollution Degree 2 acc. to IEC 60664-1
Admissible Torque on Fixing
Nut
max 1.2 Nm
Panel Thickness max 3 mm
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: FEP
Approval Logo Certificates Certification Body Description
VDE Approvals VDE VDE Certificate Number: 40043890
UL Approvals UL UL File Number: E39328
2
Fuseholder
FEP https://www.schurter.com /PG02
Circuit Protection
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to UL 4248-1 Fuseholder general requirements
Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Dimension [mm] 35 mm
31
24 11
Ø15
max. 3
16
4
SW 14
0.5
FEP 0031.1001
35
0.5
19.9 11
Ø15
max. 3
16.1
2.8
SW 14
FEP 0031.1071
13
12 0
-0.1
0
-0.1
0
-0.3
12.7
3
Fuseholder FEP
https://www.schurter.com /PG02
Circuit Protection
Derating Curves
5x20 mm
Admissible Power Acceptance in
Watt
1.5
1.0
0.5
0.0
2.5
2.0
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
Ambient Air Temperature Ta °C
All Variants
Holder Cap Terminal Position End-Terminal Degree of Pro-
tection
Order Number
lFingergrip Solder 4.0 x 0.5 mm 30° to Fuse Axis IP42 0031.1001
lFingergrip Quick-Connect 2.8 x 0.5 mm 90° to Fuse Axis IP42 0031.1071
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging Unit Bulk (100 pcs.)
Accessories
Description
Nut for fuse holder
Mounting accessories for fuse holder
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
17.03.2021
