SPECIFICATION Supplier : Samsung electro-mechanics Product : Multi-layer Ceramic Capacitor Samsung P/N : CL31C471JIHNNNE CAP, 470, 1000V, 5%, C0G, 1206 Description : A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness CL 31 C 471 J I H N N N E Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 0.2 C0G 470 5 % 1000 V 1.6 0.2 mm mm Inner electrode Termination Plating Product Special Packaging W: 1.6 0.2 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Embossed Type,7"reel(2,000ea) B. Samsung Reliability Test and Judgement condition Performance Capacitance Q Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Test condition Within specified tolerance 1000 min 110% 0.5~5Vrms More than 500Mohm 50050 Vdc 60~120 sec. No abnormal exterior appearance No dielectric breakdown or mechanical breakdown C0G Visual inspection 120% of the rated voltage (From -55 to 125, Capacitance change should be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. terminal electrode Capacitance change : within 5% Bending to the limit (1mm) with 1.0mm/sec. More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Soldering heat Capacitance change : within 2.5% Tan , IR : initial spec. Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 2.5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) With rated voltage Moisture Resistance Capacitance change : within 7.5% Q: 200 min IR : More than 25* High Temperature Resistance Capacitance change : within 3% Q: 350 min IR : More than 50* With 100% of the rated voltage Max. operating temperature 1000+48/-0 hours Temperature Cycling Capacitance change : within 2.5% Tan , IR : initial spec. 1 cycle condition Min. operating temperature Max. operating temperature 402, 90~95%RH, 500 +12/-0 hours 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25 25